*mydirectindustry

Cb87

Product catalog summary

Product Overview

The document describes the CB87 Shift Display Device, a 5-digit digital indicator designed for direct reading and regulation of displacement or angular position through the rotation of a drive shaft.

Key Specifications

Display: 5 digits, capable of reading up to 9999.9
Digit Height: 6 mm
Shaft Hole: Standard diameter of 20 mm; smaller diameters available upon request with a reduction cylinder
Reading Orientation: Tilted frontal view for ease of reading
Measurement Basis: Based on the pitch of the endless screw (worm screw)

Rotation and Reading Direction

H (Horizontal) Axis: Value increases with clockwise rotation; decreases with counterclockwise rotation
A (Vertical) Axis: Value increases with counterclockwise rotation; decreases with clockwise rotation

Technical Data - Worm Screw Pitch and Ratios

Ratio	Worm Screw Pitch (mm)	Reading After 1 Rotation	Max Speed (mm)
0.5	0.0005	500	300
1	0.0010	300	300
1.5	0.0015	300	300
2	0.0020	300	300
2.5	0.0025	300	300
3	0.0030	300	300
4	0.0040	200	200
5	0.0050	200	200
6	0.0060	200	200
10	0.0100	150	150
12	0.0120	150	150

Note: Counters ordered in inches are supplied with 2 red digits.

Additional Notes

The device supports direct reading of displacement or angle through shaft rotation.
Standard shaft hole is 20 mm; other sizes available on request.
Reading is optimized with a tilted frontal view for better visibility.

Manufacturer Information

Talleres Emit, S.A.
Polígon Industrial "Can Mascaró"
Carrer Ponent, 68 · 08756 La Palma de Cervelló (Barcelona - SPAIN)
Tel.: +34.902.10.71.69
Fax: +34.902.10.71.68
Email: [email protected]
Website: www.talleres-emit.com

Catalog excerpts

VISUALIZADOR DE DESPLAZAMIENTO CB87 SHIFT DISPLAY DEVICE CB87 ø6 H. Valor creciente con rotación horaria. (Valor decreciente con rotación antihoraria). A. Valor creciente con rotación antihoraria. (Valor decreciente con rotación horaria). H. Value increasing with clockwise rotation. (Value decreasing with counterclockwise rotation). A. Value increasing with counterclockwise rotation. (Value decreasing with clockwise rotation). RELACIÓN RATIO PASO SINFÍN (mm) ENDL. SCREW PITCH (mm) LECTURA DESPUÉS DE 1 GIRO READING AFTER ROTATION Nota: Los contadores encargados en pulgadas se suministran con 2 cifras rojas. Es un indicador digital de 5 cifras para la regulación y la lectura directa de un desplazamiento (o un ángulo), obtenida mediante la rotación de un eje de maniobra. It is a digital display of 5 digits for regulation and direct reading of any angle or shift obtained by rotation of a drive axle. TALLERES EMIT, S.A. Polígon Industrial "Can Mascaró" Carrer Ponent, 68 · 08756 LA PALMA DE CERVELLÓ (Barcelona - SPAIN) Tel.: +34.902.10.71.69 Fax: +34.902.10.71.68 Reading with tilted frontal view. Counter of 5 digits: reading up to 9999.9 Height of digits: 6 mm. Standard hole for the shaft: 20 mm. Other smaller hole sizes with reduction cylinder on request. • Execution based on the relevant endless screw pitch.. EJE HORIZONTAL www.talleres-emit.com [email protected] Lectura con vista frontal inclinada. Contador de 5 cifras: lectura hasta 9999.9 Altura de las cifras: 6 mm. Agujero standard del eje 20 mm. Otros agujeros menores a petición con cilindro de reducción. • Ejecuci

Open the catalog to page 1