5R.6R

5R.6R

Product catalog summary
Specifications:
  • Model 6R: Features 6 digits with a height of 8 mm. It has a maximum counting rate of approximately 600 rpm. The counter can be reset to zero using a key-lock combination. The impulse shaft is available on both sides, allowing for counting in either direction (addition or subtraction).
  • Model 5R: Features 5 digits with a height of 4.5 mm. It has a higher maximum counting rate of approximately 5000 rpm. The counter can be instantly reset to zero using a lever. Similar to Model 6R, the impulse shaft is available on both sides for directional counting.
Procedures:
  • Both models allow for counting in both directions, which can be adjusted based on the turning direction to either add or subtract counts.
Diagrams and Data:
  • The document includes diagrams illustrating the positioning and directional settings for counting operations.
Contact Information:
  • TALLERES EMIT, S.A., located at Polígon Industrial "Can Mascaró", Carrer Ponent, 68, 08756 LA PALMA DE CERVELLÓ, Barcelona, Spain. Contact via phone at +34.902.10.71.69 or fax at +34.902.10.71.68.
See more

Catalog excerpts

5R.6R-1

Cuenta Vueltas / Turn Counter CUENTA VUELTAS Modelo 6R TURN COUNTER Model 6R Nº de cifras: 6 Altura de las cifras: 8 mm. Admisión máxima aproximada: 600 r.p.m Puesta a cero por LLAVE. Eje de impulso a ambos lados, dependiendo el sentido de giro para sumar o restar. (Ver recuadro). Number of digits: 6 Digits 8 mm Height. Approximate maximum counting rate: 600 rpm Zero reset using key-lock combination. Impulse shaft on both sides, depending on turning direction for adding or subtracting. (See diagram). TURN COUNTER Model 5R Nº de cifras: 5 Altura de las cifras: 4.5 mm. Admisión máxima aproximada: 5000 r.p.m Puesta a cero instantanea por pulsador. Eje de impulso en ambos lados, dependiendo el sentido de giro para sumar o restar. (Ver cuadro). Number of digits: 5 Digits 4.5 mm Height Approximate maximum counting rate: 5000 rpm Instant zero reset using lever. Impulse shaft on both sides, depending on turning direction for adding or subtracting. (See diagram). SENTIDO DE GIRO POSICIÓN I TALLERES EMIT, S.A. Polígon Industrial "Can Mascaró" Carrer Ponent, 68 · 08756 LA PALMA DE CERVELLÓ (Barcelona - SPAIN) Tel.: +34.902.10.71.69 Fax: +34.902.10.71.68 www.talleres-emit.com [email protected]

 Open the catalog to page 1

All TALLERES EMIT, S.A. catalogs and technical brochures

  1. mcf6x

    1  Page

  2. lfc6

    1  Page

  3. TM5000

    2  Pages

  4. 9R

    1  Page

  5. 12tm

    1  Page

  6. 12m24m

    1  Page

  7. 7M-7ME

    1  Page

  8. 12mp

    1  Page

  9. s50g

    2  Pages

  10. s40g

    4  Pages

  11. fitxa- emcc

    1  Page

  12. 40g-2

    1  Page

  13. 4G-22G

    1  Page

  14. encoder

    2  Pages

  15. em22

    1  Page

  16. em2010

    1  Page

  17. em2002

    1  Page

  18. mcf6s

    1  Page

  19. mcf6c

    1  Page

  20. mcf4s

    1  Page

  21. mcf4c

    1  Page

  22. lfc6s

    1  Page

  23. lfc5

    1  Page

  24. fz147

    1  Page

  25. fz137

    1  Page

  26. Fz127

    1  Page

  27. EM-2011

    1  Page

  28. EM-2022

    1  Page

  29. FZ146

    1  Page

  30. EM46

    2  Pages

  31. Turn Counter

    1  Page

Archived catalogs

  1. Cb87

    1  Page

  2. catalogue

    18  Pages

  3. emr3b

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.