Series SFB0160 : 160VA Total power rating
Series SFB0160 : 160VA Total power rating
The document provides technical specifications for the Talema Group's SFB0160 series of toroidal transformers, which have a total power rating of 160VA. These transformers are designed for use in standard control panels.
- Primary Voltage: Available in 230V and 400V options.
- Secondary Voltage and Current: Multiple configurations are available:
- SFB0160-230-12: 12-0-12V, 6.667A
- SFB0160-230-24: 24-0-24V, 3.333A
- SFB0160-230-55: 55-0-55V, 1.455A
- SFB0160-400-12: 12-0-12V, 6.667A
- SFB0160-400-24: 24-0-24V, 3.333A
- SFB0160-400-55: 55-0-55V, 1.455A
- Temperature Class: Winding wire is Class H (180°C), insulation between windings is Class B (130°C), and connection lead insulation is Class A (105°C).
- Standards: Conforms to EN61558 Class II and EN60065 Class II (IEC65).
- Dimensions: 96 x 78 x 99mm
- Mounting Holes: 80 x 39mm between centers
- Weight: Approximately 1.50 Kg
- Screw terminals suitable for conductors 0.5mm² to 4mm², rated at 16A (VDE0551).
- Material: Polyamide 6/6, meeting VBG4 and VDE0106, part 100, "Finger Safety Guard" VDE0470, Part 1.
- Administrative and manufacturing offices are located in India, with additional design, sales, and marketing offices in Ireland, Czech Republic, Germany, and the United States.
Catalog excerpts
Standard Control Panel Toroidal Transformers Series SFB0160 : 160VA Total power rating Vprim Vsec–0–Vsec, @ 80VA Each (Centre-Tapped winding) Nuvotem Talema Part Number SFB0160-230-12 SFB0160-230-24 SFB0160-230-55 SFB0160-400-12 SFB0160-400-24 SFB0160-400-55 Temperature Class: Winding Wire (Primary & Secondary) Insulation between windings Connection lead insulation Class H (180°C) Class B (130°C) Class A (105°C) Designed and manufactured to conform to the requirements of : EN61558 Class II, Non-Short-Circuit-Proof EN60065 Class II (IEC65) Physcial Data Dimensions (L x W x H) Mounting Holes (X x Y) Approximate Weight Screw terminals suitable for conductors 0.5mm² to 4mm², rated at 16A (VDE0551) Material : Polyamide 6/6 (PA 6/6), Meets requirements of VBG4 and VDE0106, part 100, “Finger Safety Guard” VDE0470, Part 1 Talema Group Magnetic Component
Open the catalog to page 1
Regional Locations - Design, Manufacturing, Sales & Marketing Talema Group Global Offices North America United States (Sales & Marketing) (Design, Manufacturing, Sales & Marketing) Talema Group, LLC PO Box 935 900 Innovation Drive Suite 120, Rolla Missouri 65402 Tel: +1 573-303-3675 E-Mail: [email protected] Web: talema.com Administrative Office Factory Premises Talema Electronic India Private Limited Door No. 221, 1st and 2nd Floor KJ Plaza, Opp.to Vidya Mandir School Meyanur Main Road Salem - 636 004 Tamil Nadu INDIA. Tel: +91 427 - 243 3100 Fax: +91 427 - 243 3109 E-Mail: [email protected]...
Open the catalog to page 2
