Current Transformer Quick Reference Guide Low Cost 50/60Hz Current Transformers Applications • • • • Sensing Overload Current Ground fault detection Metering Analog to Digital Circuits Excellent quality at extremely competetive price due to high volume production Manufactured in an ISO 9001:2015 and ISO 14001:2015 certified Talema facility Fully RoHS & REACH Compliant Turns Ratio Standard Accuracy Current Transformers Volts/Amp @ rated IP for various loads (Ohms) 100 µArms Vrms (grams) RCF : Ratio correction factor - Multiply current readings by this factor to compensate for transformer losses Dimensional Unit: mm Dimensional Tolerance: ±0.25mm (Unless Specified) Pin Pitch Tolerance: ±0.10mm Notes: Dimensional Unit: mm Dimensional Tolerance: ±0.25mm (Unless Specified) Pin Pitch Tolerance: ±0.10mm 1) Unless requested, the terminating resistor and the one-turn primary are not supplied 2) Pin 3: Normally for mechanical support only but will be used on center tapped designs 3) Each part number adjusted to be most accurate at specified load Talema Group

Regional Locations - Design, Manufacturing, Sales & Marketing Talema Group Regional Offices North America United States (Sales & Marketing) (Design, Manufacturing, Sales & Marketing) Administrative Office Factory Premises Talema Electronic India Private Limited Talema Electronic India Private Limited Plot Nos. 30, 31 Electrical and Electronic Suite 120, Rolla Missouri 65402 Tel: +1 573-303-3675 E-Mail: [email protected] Web: www.talema.com Door No. 221, 1st and 2nd Floor KJ Plaza, Opp.to Vidya Mandir School Meyanoor Main Road Salem - 636 004 Tamil Nadu INDIA Tel: +91 427 - 243 3100 Fax: +91...