- Catalogs
- Talbot Decoupage Emboutissage
- User Manual_Goliath Davit / jib crane
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
User Manual_Goliath Davit / jib crane
User Manual_Goliath Davit / jib crane
This user manual provides guidance for the safe and efficient use of the Goliath davit, emphasizing adherence to instructions for optimal performance and safety. The davit comes with a one-year warranty under normal use and is partially pre-assembled for quick setup.
The manual includes specifications for various davit models, detailing load capacities, dimensions, winch types, cable diameters, and materials used, such as galvanized steel or stainless steel 316L.
The davit is designed for lifting or lowering equipment within specified load limits and can rotate 360° for maintenance ease. Some winches allow for the removal of the crank handle for added safety.
Safety precautions include not using the davit to maintain a load at height, avoiding overloading, ensuring balanced load positioning, and not modifying the equipment. Users must wear personal protective equipment and secure the davit in a designated base.
The assembly involves installing the foot with recommended anchoring and assembling the davit on a flat surface. Necessary tools and parts are listed, and detailed steps are provided for assembling the mast and securing the cable.
Instructions include installing the winch, performing a load test, and ensuring the crank handle is securely locked. Proper cable guidance and brake system functionality are emphasized.
Regular checks of the cable and hook condition are required, with annual gear lubrication. Only original parts should be used for maintenance. Safety instructions include not lifting people or leaving loads suspended.
Inspect the winch before each use, do not exceed nominal capacities, and avoid using a damaged or fully unrolled cable. Keep the winch out of reach of children and untrained individuals.
Annual inspection by a qualified person is mandatory, with maintenance recorded in a logbook. Only original parts should be used for replacements.
Ensure the crank is securely attached and the brake functions properly. The winch should emit a regular clicking sound during operation.
Protect equipment from rough handling, regularly check fastening elements, and perform maintenance as recommended.
Lifting devices must be inspected and certified annually by an accredited organization, involving visual inspection, cable inspection, and a load test.
The davit warranty is valid for one year, covering parts and labor under normal use conditions. It requires adherence to manual instructions and annual certification.
The warranty does not cover damages from impacts, scratches, or modifications. It is void if the davit is used beyond its load limit or modified.
Spare parts are available on the Goliath store website, and only these should be used to ensure proper functioning and safety.
For further inquiries, visit the contact page at the Goliath store website.
Catalog excerpts
User manuals: Davits Notice d’utilisation: Potences Document to be stored safely Document à conserver Bitte dieses Dokument sorgfältig aufbewahren TALBOT LIFTING AND SECURITY EUROPE 90 Ranelagh Rd, Ranelagh, Dublin 6, D06 K19
Open the catalog to page 1
User manuals: Davits Notice d’utilisation: Potences 1. Introduction - Introduction - Einleitung EN: This user manual has been designed to help you use your Goliath davit under the best safety and efficiency conditions. We therefore encourage you to read it carefully and follow the instructions provided. Our products are subject to quality monitoring and rigorous controls throughout the manufacturing process. They come with a 1-year warranty starting from the date of shipment. This warranty applies under normal use and strict adherence to the instructions in this manual (see warranty conditions)....
Open the catalog to page 2
User manuals: DavitsNotice d’utilisation: PotencesGOLIATH2. Technical Data- Donnees techniques - Technische Angaben *Acier Galvanise / Feuerverzinkter Stahl ** Acier inoxydable 316L / 316L Edelstahl 3. Davit's functionalities - Fonctionnalites de la potence - Funktionen Ihres Davits EN : The davit is a tool designed for lifting or lowering equipment within the recommended maximum load limit. The davit is not intended to suspend a load for any duration longer than necessary for handling. The davit can rotate 360° to simplify equipment maintenance. For added safety, the crank handle on certain...
Open the catalog to page 3
User manuals: Davits Notice d’utilisation: Potences Never wrap the wire cable around the load. This damages the cable and could cause the load to fall. Use a shackle or another approved lifting device. Never use the davit or pulleys without the safety guards in place or if they are improperly installed. Never use the davit to pull or drag loads. The operator must maintain attention and visual contact with the load at all times during handling. The davit must always be secured in a base designed for this purpose. Never shake or swing the load. Avoid impact loads by starting and stopping the load...
Open the catalog to page 4
User manuals: Davits Notice d’utilisation: Potences 5. Assembly Instructions for the Davit - Instruction pour l’assemblage de la potence Montageanleitung für den Davit EN : Foot Installation: Recommended anchoring: Four 16mm diameter threaded rods for heavy loads with a chemical sealing system in a concrete floor or wall. Assembly: The assembly should be performed on a flat surface. The davit will then be placed into the base previously fixed. You will need a mallet, a 6-sided wrench for M12 and M10 screws, as well as a torque wrench. Open the box and verify that you have the following parts:...
Open the catalog to page 5
User manuals: Davits Notice d’utilisation: Potences A/ Hoist attachment Fixation pour palan Hebevorrichtung TALBOT LIFTING AND SECURITY EUROPE 90 Ranelagh Rd, Ranelagh, Dublin 6, D06 K192
Open the catalog to page 6
User manuals: Davits Notice d’utilisation: Potences EN : Force the plastic piece (7) into the tube (4).Hold the piece by hand before tapping it into place with a mallet. Take the tube (4), splices, screws, and washers to start assembling the mast. Insert the splices (9) into the tube (4) and manually place an M12x35 screw and an M12 washer on each side, as shown in figure B. Assemble the set (14). Unwind enough cable using the winch crank to work freely. Fix the flanges (13) in a quantity of 4 onto the omega piece (12) using M12 fastening screws, a washer, and a nut (see photo above). Place the...
Open the catalog to page 7
User manuals: Davits Notice d’utilisation: Potences Positionieren Sie die Rollenhalterung an der gewünschten Stelle auf der Turmspitze und ziehen Sie die M12-Schrauben mit einem Drehmoment von 60 bis 70 Nm und die M10-Stellschrauben mit einem Drehmoment von 36 bis 40 Nm fest. Das Ergebnis sollte wie gezeigt aussehen: D/ 4 last screws 4 dernières vis 4 letzte Schrauben 90° Winch location Emplacement treuil Windenstandort EN : Install the winch with the remaining 4 screws around the connection of the two mast tubes. Tighten the M12 screws with a torque of 60 to 70 Nm. The winch should be positioned...
Open the catalog to page 8
User manuals: Davits Notice d’utilisation: Potences 6. Winch assembly detail- Détail du montage du treuil - Details der Windenmontage EN : Before each use, ensure that the crank handle is securely locked onto its shaft with the worm gear against the brake system (opposite the retaining nut) and that the brake is in perfect working condition. Proceed as follows: Slightly lift the load and release the crank handle. The load should not descend. It is essential to respect the maximum loads indicated on the winch's nameplate. The load raises or lowers according to the directions marked on the brake...
Open the catalog to page 9
User manuals: Davits Notice d’utilisation: Potences Never exceed the loads indicated for the winch. Warning: The loads indicated on the nameplate represent the winch's nominal capacities. When selecting the winch, ensure that you account for all friction, system resistance (e.g., pulleys), in addition to the load itself. Never use the winch with a damaged cable. Dispose of the cable according to applicable standards. FR :Instructions générales : S’assurer avant chaque utilisation que la manivelle est bien verrouillée sur son axe à vis sans fin contre le système de frein (opposé à l’écrou de retenue)...
Open the catalog to page 10
User manuals: Davits Notice d’utilisation: Potences Ne jamais monter le câble en sens inverse de la rotation normale du tambour indiquée sur l’étiquette du treuil. Le frein à friction serait alors mis hors fonction. Ne pas laisser à la portée des enfants ni de personnes ne connaissant pas le fonctionnement du treuil. Utiliser seulement la manivelle. Ce treuil n’est pas conçu pour fonctionner avec un moteur quel qu’il soit. Ne jamais démonter ou modifier le treuil. Ne jamais dépasser les charges indiquées pour le treuil. Attention : Les charges indiquées sur l’étiquette signalétique, représentent...
Open the catalog to page 11All Talbot Decoupage Emboutissage catalogs and technical brochures
Build Your Crane1 Page
Catalog Winches8 Pages
