Surface Miner TSM 250

Product catalog summary

Project Overview
The project involves the turn-key supply of a Surface Miner MTS 250 for the Navoijskij gorno – metallurgitscheskij kombinat located in Taschkura, Uzbekistan. The scope includes supervision of erection, on-site training, functional testing, commissioning, trial operations, and performance recording.

Equipment Specifications

The Surface Miner MTS 250 is designed for laminar removal of overburden and minerals with a strength of up to 90 MPa without prior blasting.
Features a large cutting drum that operates at a low driving speed, optimizing material transfer and minimizing wear on the traveling gear.
Capable of cutting uneven surfaces to create a smooth driving plane.
Equipped with two belt conveyors for efficient material transfer to downstream equipment.
Compatible with trucks, tripper cars, and bench conveyors, specifically designed for loading onto CAT 777 trucks.

Technical Data

Material: Phosphorit, Marl
Unconfined compressive strength: up to 90 MPa
Rated capacity: 250 to 300 bm3/h
Maximum cutting height: 0.8 m; Normal cutting height: 0.6 m
Maximum cutting width: 3.5 m; Cutting circular diameter: 1.6 m
Drum width: 3.75 m
Required driving speed at rated capacity and cutting height 0.6 m/0.2 m: 1.98 / 5.95 m/min
Number of crawlers: 3
Distance from center cutting drum to center of discharge pulley: 13.5 m
Outreach loading boom: 10.5 m
Service weight: approximately 130 t
Total installed power: 740 kW

Project Schedule
The commissioning took place in 2006, and the equipment is still in commercial operation.

Contact Information
TAKRAF-Office Taschkent
Ataturk str. 17, 100047 Taschkent, Uzbekistan
Phone: +998 71 2361048
Fax: +998 71 2361437
Email: [email protected]

Surface Miner TSM 250

Surface Miner TSM 250

All TAKRAF catalogs and technical brochures