Catalogs >
TAKASAGO FLUIDIC SYSTEMS >
Ultra-small Diaphragm-isolation Latching Solenoid Valve FLV Series

Ultra-small Diaphragm-isolation Latching Solenoid Valve FLV Series
3Pages

Catalog excerpts

Ultra-small Diaphragm-isolation Latching Solenoid Valve FLV Series - 1

(Patented in the United States) Ultra-small Diaphragm-isolation Latching Solenoid Valve 1. 4.2mm square: 4.2×4.2×23.1mm*1 An innovative and groundbreaking ultra-small solenoid valve - can be mounted in the smallest of spaces, minimizing the manifold size and shortening the length of flow paths. *1 Dimensions for FLV-2-MFG, not including wire connections 2. Diaphragm valve Excellent chemical resistance – PEEK and Perfluoroelastomer are used for wetted materials (materials can be changed according to your requirements). 3. Internal volume only 1.1μl*2 Through pursuing miniaturization to the uttermost limits, internal volume is now only 1.1μl – contributes to reductions in reagent and sample quantities and improvements in analysis accuracy. *2value for FLV-2-MFGA(B). FLV-2-N1G: 4.3μl、FLV-2-MFG: 1.5μl 4. Latching Solenoid Valve The open status of valve is maintained by magnetic force. No energization is required to maintain the valve status. Contributes to energy saving and lower heat generation through energization. See page 3. TAKASAGO ELECTRIC, INC. 66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN Tel +81-52-891-2301 Fax+81-52-891-7386 E-mail: info@takasago-elec.co.jp URL: http://www.takasago-fluidics.com

Open the catalog to page 1

Ultra-small Diaphragm-isolation Latching Solenoid Valve FLV Series - 2

Specifications Model number Orifice Diameter Port Connection Hose Barb Coil Type Gasket Latch Type Solenoid IN0 – 100kPa Operating Pressure Range Fluid Temp. Range Ambient Temp. Range Power Consumption Diaphragm Material Body Material Hose Barb Material *1 A and B have a 90 difference in port orientation.

Open the catalog to page 2

Ultra-small Diaphragm-isolation Latching Solenoid Valve FLV Series - 3

Latching Solenoid Valve In the case of a normally closed type of conventional solenoid valve, continuous energization is required to maintain open status. The latching solenoid doesn’t require a power supply for the purpose of maintaining open status through the utilization of a permanent magnet. Merits of the Latching Solenoid Valve 1. Energy saving Valve does not require energizing to maintain its state, so for applications where a conventional valve would require long periods of energization the economical benefits are significant. Note: Power is required during changing of state (Open...

Open the catalog to page 3