*mydirectindustry

SBP Series

Product catalog summary

Overview: The document describes the SBP Series Pen-Type Syringe Pump by Takasago Electric, Inc., highlighting its compact design, high resolution, and various features suitable for portable devices.

Features:

High resolution with a theoretical resolution of 0.105 nl at 1/100 micro-step, ensuring smooth flow.
Compact dimensions of Dia. 12 x L 170 mm, incorporating a built-in 2-phase stepper motor with a reduction gear.
Customizable ultra-small type with an outer diameter of 8.8 mm available upon request.
Multiple syringe terminations including needle, Luer Lock, M6 or 1/4-28UNF threads, and disposable tip adaptor.
Built-in sensor to prevent overrun and an optional easy-to-use controller.

Specifications:

Model Numbers: SBP-100G-N, SBP-100G-LL, SBP-100G-M6(1/4U)F, SBP-100G-DT.
Outer Dimensions: Vary slightly by model, with the longest being Dia. 12 x L183 mm.
Syringe Capacity: 100 μl.
Theoretical Resolution: 0.105 nl at 1/100 micro-step and 10.5 nl at full step.
Wetted Materials: Glass (barrel), PTFE (tip, seal), Stainless steel (needle), PVDF, and PEEK depending on the model.
Syringe Termination: Options include Needle 22G, Luer Lock, M6 or 1/4-28UNF threads, and adapter for disposable tips.

Additional Information: The pump can be directly installed onto a moving arm, minimizing the air gap between the syringe and the sample for higher accuracy. Note that specifications may change without notification.

Catalog excerpts

PEN-TYPE SYRINGE PUMP Extremely Compact and High Resolution Features High resolution provides smooth flow (theoretical resolution: 0.105 nl at 1/100 micro-step). Remarkably small outer dimensions of Dia. 12 x L 170 mm (threads model), now with a built-in 2-phase stepper motor with a reduction gear. Suitable for portable devices. An ultra-small type with an outer diameter of 8.8 mm is also available by custom order. (Please contact us for details of the micro-stepper drive mode.) Various syringe terminations: needle, Luer Lock, M6 or 1/4-28UNF threads, disposable tip adaptor, attachment for our ultra-small 3-way valve, etc. See reverse page. Has a built-in sensor to prevent overrun. An easy-to-use controller is available upon request. Use the QR code on the right or the link below to see a video. http://www.takasago-elec.co.jp/movie/SBP-e.wmv TAKASAGO ELECTRIC, INC. 66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN Tel +81-52-891-2301 Fax+81-52-891-7386 E-mail: [email protected] URL: http://www.takasago-fluidics.com/

Open the catalog to page 1

Specifications Model Number Outer Dimensions (excluding sensor case) (excluding needle) Syringe Capacity At 1/100 micro-step: 0.105 nl At full step: 10.5 nl Glass (barrel) PTFE (tip, seal) PVDF, Stainless steel (attached needle) Glass (barrel) PTFE (tip, seal) PEEK (port) Wetted Materials Glass (barrel) PTFE (tip, seal) Stainless steel (needle) Luer Lock (with needle) Glass (barrel) PTFE (tip, seal) *Samples only contact with a disposable tip (material: PP). Adapter for disposable tip (Eppendorf®, epT.I.P.S., 2-200 μl) *2 Syringe Termination Male threads also available. Disposable tip not included...

Open the catalog to page 2

SBP Series

SBP Series

Catalog excerpts

All TAKASAGO FLUIDIC SYSTEMS catalogs and technical brochures