1. Catalogs
  2. TAKASAGO FLUIDIC SYSTEMS
  3. Manually Adjustable Low Pulsation Micro Pump Unit

Manually Adjustable Low Pulsation Micro Pump Unit

Manually Adjustable Low Pulsation Micro Pump Unit

Product catalog summary
Overview:
The document describes a manually adjustable low pulsation micro pump unit developed by Takasago Electric, Inc. This pump unit is designed to provide precise flow control using a piezoelectric micro pump and a micro needle valve.

Specifications:
  • Flow Rate: Adjustable from nanoliters per minute (nl/min) to approximately 1.5 milliliters per minute (ml/min).
  • Flow Pulsation: Significantly reduced at low flow rates due to the micro needle valve.
  • Power Source: Operable with AAA or R03 batteries.
  • Dimensions: Compact size of 66 x 25 x 105 mm.
  • Maximum Pump Pressure: Approximately 35 kPa, subject to variation based on flow channel configuration and fluid characteristics.

Applications:
  • Suitable for use in Lab-on-a-Chip devices and cell culture media circulation.

Additional Features:
  • Includes 1/4-28UNF threaded inlets and outlets.
  • A demonstration video is available online.
  • Unit of a piezo pump and a needle valve is available, requiring a separate driver or controller.

Contact Information:
Takasago Electric, Inc., 66 Kakitsubata, Narumi-cho, Midori-ku, Nagoya, 458-8522 Japan. Tel: +81-52-891-2301, Fax: +81-52-891-7386, Email: [email protected], Website: http://www.takasago-fluidics.com/

Note: Specifications are subject to change without notification.
See more

Catalog excerpts

Manually Adjustable Low Pulsation Micro Pump Unit-1

INTEGRATED PRODUCT Manually Adjustable Low Pulsation Micro Pump Unit Suitable for Lab-on-a-Chip Devices, Cell Culture Media Circulation, etc. Flow from a piezoelectric micro pump is adjusted by a micro needle valve. ■ Can adjust flow from nl/min level to around 1.5 ml/min manually. Flow pulsation at low flow rates is drastically reduced by a micro needle valve (See the graph at the bottom). ■ Usable as a stand alone by AAA or R03 batteries. ■ Compact size: Dimensions of 66 x 25 x 105 mm Maximum pump pressure is around 35 kPa (The value varies depending on the flow channel configuration and fluid characteristics). Demonstration video is available at the following website. :S<Example flow data> Flow Characteristics (nl/min zone, enlarged) Flow Characteristics (|il/min zone) Reduction of Flow Pulsation Similar Item <Example flow data>_ Flow —Piezo Pump Only (Low Frequency) {nl/min) —Piezo Pump + Micro Needle Valve Unit of a piezo pump separately needed). Note: Details including specifications may change without notification. 66 KAKITSUBATA, NARUMI-CHO, MIDORPKU, NAGOYA, 458-8522 JAPAN E-maiL [email protected] URL: http://www.takasago-fluidics.com/

 Open the catalog to page 1

All TAKASAGO FLUIDIC SYSTEMS catalogs and technical brochures

  1. PM Series

    2  Pages

  2. SAP Series

    2  Pages

  3. SDMP320 330W

    2  Pages

  4. RP-TX Series

    1  Page

  5. CJ series

    1  Page

  6. MNV series

    2  Pages

  7. SBP Series

    2  Pages

  8. RP-Q1 Series

    1  Page

  9. CTV-2-4MICK

    2  Pages

  10. PKV Series

    2  Pages

  11. LV series

    1  Page

  12. KV series

    3  Pages

  13. FV series

    2  Pages

  14. EXV Series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.