PIEZOELECTRIC MICRO PUMP Highly Inert Models APP Series Uses only PTFE, PEEK and Perfluoroelastomer as wetted materials. Most suitable for aggressive chemicals, solvents, etc. Small-sized, lightweight and slim. Typical flow is 15 ml/min, which is adjustable by changing drive voltage or drive frequency. Low noise and low power consumption. Self-priming is possible. Specifications Model Number Pump Type Piezoelectric Diaphragm Pump Flow Rate Pump Pressure Drive Voltage Drive Frequency Suction Load Pressure Operating Temperature 5 ~ 50 ˚C PTFE, PEEK (polyether ether ketone) Wetted Materials External Dimensions 17 g Note: Details including specifications may change without notification. TAKASAGO ELECTRIC, INC. 66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN Tel +81-52-891-2301 Fax+81-52-891-7386 E-mail: [email protected] URL: http://www.takasago-fluidics.com/

Driver board MPD-200A This driver board is a thin, compact and lightweight, yet high-voltage circuit board, designed for the piezoelectric micro pumps. From a regular 5 VDC input voltage, it can easily generate the high voltage supply of approximately 250 Vp-p, 40 Hz necessary for driving the micro pumps. Item Input Voltage Output Frequency Output Voltage Number of Pumps Connectable External Dimensions, Weight This is a compact and lightweight controller that can provide the high voltage power necessary for driving the micro pumps. It is user-friendly with a front panel digital display for configuring...