(Patented in the United States) Ultra-small Diaphragm-isolation Solenoid Valve 1. 4.2mm square: 4.2×4.2×23.1mm*1 × × An innovative and groundbreaking ultra-small solenoid valve - can be mounted in the smallest of spaces, minimizing the manifold size and shortening the length of flow paths. *1 Dimensions for FV-2-MFG, not including wire connections 2. Diaphragm valve Excellent chemical resistance – PEEK and perfluoroelastomer are used for wetted materials (materials can be changed according to your requirements). 3. Internal volume only 1.1µl*2 Through pursuing miniaturization to the uttermost limits, internal volume is now only 1.1µl – contributes to reductions in reagent and sample quantities and improvements in analysis accuracy. *2value for FV-2-MFGA(B). FV-2-N1G: 4.3μl、FV-2-MFG: 1.5μl REMARKS The FLV series is a model that uses a latching solenoid. This FV series is a normal solenoid valve. This product doesn’t require a polarity change, which is necessary for the actuation of the FLV series. Note: Details including specifications may change without notification 2 0 0 8 .0 2 TAKASAGO ELECTRIC, INC. 66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN Tel +81-52-891-2301 Fax+81-52-891-7386 E-mail: [email protected] URL: http://www.takasago-fluidics.com

Specifications Model number Orifice Diameter Port Connection Hose Barb Operating Pressure Range Fluid Temp. Range Ambient Temp. Range Power Consumption Duty Cycle Coil Temp. Increase Max. 80 °C From Ambient Temperature (when energized for 1.5 minutes at rated voltage) Diaphragm Material Body Material Hose Barb Material PEEK (Optionally PPS) *1 A and B have a 90° difference in port orientation.