CAPILLARY TUBE FITTINGS Connects Glass/PEEK Capillary Tubes Easily Features ・ Pressure capability of -90 ～ 700 kPa at Tubes Easily Connects Glass/PEEK Capillarytemperature range of 5 ～ 60 degrees C. Features ・ Flat bottom seal design that enables easier machining on female port compared to tapered seal design. ・ Customization to meet customer’s tubing diameters is possible. ・ to Connect How Pressure capability 5 ～ 60 degrees C. ・ to bottom seal How Flat Connect design that enables easier machining on female port compared to tapered seal design. ・ Customization to meet customer’s tubing diameters is possible. *You can connect this fitting to a female port by simply screwing it into the port after a capillary tube is inserted into the seal joint and the male connecter. Standard Modelsfitting to a female port Tubing Diameters the and Applicable by simply screwing it into *You can connect this Model Tubing Tubing Seal Joint Port port after a capillary tube is inserted into the seal joint and the male connecter. Number Outer Diameter Inner Diameter Inner Diameter Connection Standard Models and Applicable Tubing Diameters Note: Details including specifications may change without notification. TAKASAGO ELECTRIC, INC. 66 KAKITSUBATA, NARUMI-CHO, MIDORI-KU, NAGOYA, 458-8522 JAPAN Note: Details including specifications may change without notification. Tel +81-52-891-2301 Fax+81-52-891-7386 E-mail: [email protected] URL: http://www.t