Catalogs >
TAKACHI Electronics Enclosure Co., Ltd. >
WGV series

WGV series
24Pages

Catalog excerpts

HIGH PERFORMANCE Outdoor Waterproof Box for 5G Technology! WG series IP68 High performance at 24-hours/1m-depth immersion ASA material is resistant to deterioration and discoloration due to ultraviolet rays. Perfect for outdoor communication or network devices. With a silicone waterproof gasket, and supported by multiple enclosing screws from the rear side, it allows the enclosure to maintain a stable high ZDWHUSURR¿QJFDSDELOLW\ Captive screws for easy maintenance There is no risk of screws dropping out and lost during maintenance. Captive screw is able to lock into a pre-drilled hole to provide a secure hold.

Open the catalog to page 1

Easy installation on walls & poles By using the optional mounting accessories, it can be installed on walls and poles with ease. Optional terminal blocks compatible Optional terminal blocks, WTB series can be installed onto the existing bosses inside the WG series box without additional processing or customization, hence can also function as a terminal junction box. (See page 8 for WTB terminal blocks.) WGV series - Pressure equalization models with ventilation plug Ventilation plug protects the enclosure from deformation by equalizing pressure in environments where there are differences...

Open the catalog to page 2

IP68 PLASTIC ENCLOSURE with VENTILATION PLUG ■ IP68 high performance plastic box protected from immersion as long as 24 hours at 1m depth where external (surroundings) and internal (inside box) pressure are different. Technical Data Protection class : IP68 (24-hours/1m-depth) Operating temperature : -30°C ~ +60°C Recommended torque : 0.5 ~ 0.6N • m Ventilation plug recommended torque : 0.6 ~ 0.8N • m ■ ASA material is resistant to deterioration and discoloration from ultraviolet rays. Perfect for use as outdoor communication or network devices. ■ Self-tapping captive screws which are able...

Open the catalog to page 3

■ DXF/DWG/PDF/STP drawings available on our website. The location of the ventilation plug is pre-fixed. *Customization for location change possible. Product no. / Details Product no. Accessories (Optional parts) Wall mounting bracket WGF series See page 9 Mounting plate WGP series See page 7 Terminal block WTB series See page 8 Pole mounting bracket WGMB • WPMB series See page WGMB-2N and 9 ~ 10 PCB mounting screw MT4-8T See page 7 DIN rail FDR series See website Pole mounting belt • ties STC • SNB • PKB series See page SCT / G3388 and 323 ~ 324

Open the catalog to page 4

IP68 HIGH PERFORMANCE WATERPROOF BOX ■ IP68 high performance plastic box protected from immersion as long as 24 hours at 1m depth. Technical Data ■ ASA material is resistant to deterioration and discoloration from ultraviolet rays. Perfect for use as outdoor communication or network devices. Protection class : IP68 (24-hours/1m-depth) Operating temperature : -30°C ~ +60°C Recommended torque : 0.5 ~ 0.6N • m ■ Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a...

Open the catalog to page 5

■ DXF/DWG/PDF/STP drawings available on our website. Product no. / Details Product no. Accessories (Optional parts) Wall mounting bracket WGF series See page 9 Mounting plate WGP series See page 7 Terminal block WTB series See page 8 Pole mounting bracket WGMB • WPMB series See page WGMB-2N and 9 ~ 10 PCB mounting screw MT4-8T See page 7 Protective vent PMF series See page 325 ~ 326 Pole mounting belt • ties STC • SNB • PKB series See page SCT / G3388 and 323 ~ 324 Cable gland See page 333 ~ 340

Open the catalog to page 6

Accessories (Optional parts) ■ DXF/DWG/PDF/STP drawings available on our website. W *for WGP10-15 model mounting holes x2 ■ Hole milling, clinching spacer customizations are available. See page Custom-7 ~ Custom-10 and our website for more details. ■ Material / Finish : A1100P (t=1.5mm) / Silver anodized ■ Mounting screws included. Product no. / Details Product no. Suitable models PCB MOUNTING SCREW ■ Self-tapping screws for board mounting on bosses inside WG and WGV series enclosures.

Open the catalog to page 7

Accessories (Optional parts) ■ Compatible terminal blocks for WG • WGV series. Part name Conductive plate Nickel plated Trivalent chromate Symbol board 5. Operating Temp. Range -40°C ~ +90°C Screw (Bind tapping M4-10) Trivalent chromate 6. Storage Temp. Range -40°C ~ +90°C 2. Insulation Resistance DC500V 1000MΩ ~ 3. Withstand Voltage AC2500V (Tested for 1 min.) 4. Rising Temp. 30°C or less ■ DXF/DWG/PDF drawings available on our website. A B Suitable models WG • WGV10-15-□ (W direction)

Open the catalog to page 8

Accessories (Optional parts) WALL MOUNTING BRACKET for WG • WGV ■ DXF/DWG/PDF/STP drawings available on our website. ■ Stainless steel mounting screws included. Product no. / Details Product no. Suitable models Material / Finish WG • WGV10-15-□ (D direction) WG • WGV15-21-□ (W direction) WG • WGV15-16-□ (W • D direction) WGMB series Stainless steel t=1.5mm / Barrel finish POLE MOUNTING BRACKET for WG • WGV 14 WGMB dimensions ■ Pole mount bracket made from weather resistant ASA material. ■ DXF/DWG/PDF/STP drawings available on our website. ■ Hole milling is not required when installing the...

Open the catalog to page 9

Accessories (Optional parts) WPMB-M4-2 POLE MOUNTING BRACKET WPMB-M4-2 dimensions w 92 ■ DXF/DWG/PDF/STP drawings available on our website. ■ Pole mount bracket made from weather resistant ASA material. ■ Pole mounting belt can be installed either W or D direction. ■ Pole mount is possible with the use of PKB series mounting belt. (See page 324) ■ Hole milling is not required when installing the mount bracket, thus allowing the enclosure to maintain its protection class. *Stainless steel screw belt SNB series is not usable on WPMB-M4-2 series. Color White gray Product no. / Dimensions...

Open the catalog to page 10

WGMB-2N DIECAST ALUMINIUM POLE MOUNTING BRACKET for WG • WGV 14.5 ■ DXF/DWG/PDF/STP drawings available on our website. ■ Pole mount bracket made from robust diecast aluminium. ■ Hole milling is not required when installing the mount bracket, thus allowing the enclosure to maintain its protection class. ■ Can be used for WG • WGV17-25-□, WG • WGV23-25-□ models. ■ Pole mounting belt can be installed in either W or D direction. ■ Pole mount is possible with the use of SNB or PKB series mounting belt. (See page 323 ~ 324) ■ Stainless steel mounting screws included. Product no. / Details Product...

Open the catalog to page 11