1. Catalogs
  2. TAKACHI Electronics Enclosure Co., Ltd.
  3. WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG

WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG

WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG
1 / 33 PagesView full catalog

WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG

Product catalog summary
Overview: This document outlines the specifications and features of IP68 plastic enclosures designed for outdoor use, particularly in environments with significant temperature changes. These enclosures are ideal for communication and network devices.
Specifications:
  • Ventilation Plug: Prevents deformation due to thermal expansion and equalizes pressure differences, effective under direct sunlight and temperature fluctuations.
  • Material: Constructed from ASA material, resistant to UV-induced deterioration and discoloration.
  • Protection Class: Rated IP68, capable of withstanding immersion up to 2 meters for 1 hour.
  • Operating Temperature: Ranges from -30°C to +60°C, with some models up to +75°C.
  • Fastening: Uses self-tapping captive screws for secure fastening.
Technical Data:
  • Cover Tightening Torque: 0.5 ~ 0.7N • m
  • Vent Plug Tightening Torque: 0.6 ~ 0.8N • m
  • Vent Plug Flow Rate: Up to 4,000mL/min at DP=7KPa, varies by model.
Product Variants: Lists multiple product numbers with varying dimensions and weights, suitable for different applications. Customization options for ventilation plug location are available.
Accessories: Optional parts include DIN rails, terminal blocks, mounting plates, PCB mounting screws, pole mounting brackets, and cable glands. References to additional information on accessories are provided.
Weatherability and Durability: Includes test data on weather resistance, indicating the material's ability to resist degradation over time when exposed to outdoor conditions.
Applications: Ideal for outdoor communication or network devices, offering high performance in waterproofing and resistance to environmental factors.
Mounting Options and Specifications:
  • Pole Mounting Brackets: Suitable for WG, WGPC, and WGV series, made from diecast aluminum and stainless steel. Models like WGMB-1W and WGMB-2N are highlighted.
  • Terminal Blocks: WTB series compatible with WG, WGPC, and WGV models, offering electrical ratings of 600V and 35A.
  • Stainless Steel Ties and Straps: SCT series offers corrosion-resistant ties for cable bundling and mounting enclosures.
  • Protective Vents: PMF series designed to equalize pressure differences and vent gases within enclosures, IP68 rated.
  • Adhesive Protective Vent Filters: VE8 series filters provide dustproof and waterproof protection, allowing water vapor diffusion while repelling water and oil.
Key Recommendations and Limitations:
  • Ensure proper torque settings when installing mounting brackets and straps to maintain enclosure integrity.
  • Protective vents should be installed on the sides of enclosures to prevent water collection.
  • Adhesive vent filters require a 24-hour bonding period for optimal adhesion.
Cable Glands Overview: Specifications and guidelines for RMW, RM, RSP, and AG series cable glands, designed for different applications with varying levels of waterproofing and material composition.
RMW Series: Features weatherproof cable glands with silicone sealing inserts and O-rings, suitable for outdoor use with IP67 protection.
RM Series: Low-cost polyamide cable glands with NBR rubber sealing, offering IP67 protection.
RSP Series: Strain relief cable glands designed to prevent cable bending and breaking, with IP67 waterproofing.
AG Series: High water protection cable glands with IP68 rating, made from glass fiber-filled polyamide for enhanced durability.
Technical Data: All series offer protection class equivalent to IP67 or IP68, with operating temperatures ranging from -20°C to +100°C. Installation guidelines emphasize correct torque application to prevent damage and ensure waterproofing.
See more

Catalog excerpts

WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-1

Fitted with a vent plug which prevents thermal expansion caused by difference in temperature

 Open the catalog to page 1
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-2

IP68 PLASTIC ENCLOSURE with VENTILATION PLUG ■ The ventilation plug protects the enclosure from deformation caused by thermal expansion. Effective for use under direct sunlight, or in areas with significant change in temperature. ■ IP68 high performance plastic box which withstands immersion up to 2 meters for 1 hour. ■ ASA material is resistant to deterioration and discoloration from ultraviolet rays. Perfect for use as outdoor communication or network devices. ■ Uses self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover....

 Open the catalog to page 2
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-3

‘Customization for location change possible. Wall mounting bracket WGF series See page 112 Pole mounting strap • belt SNB • PKB series See page 207 ~ 208 Tapping Standoff TPS series See page 397 Mounting plate WGP series See page 111 PCB mounting screw MT4-8T See page 112 Terminal block WTB series See page 115 DIN Rail FDR series See page 97 Cable gland See page 181 ~ 193

 Open the catalog to page 3
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-4

series IP68 PLASTIC ENCLOSURE with ECONOMICAL VENTILATION PLUG ■ The ventilation plug protects the enclosure from deformation caused by thermal expansion. Effective for use under direct sunlight, or in areas with significant change in temperature. ■ IP68 high performance plastic box which withstands immersion up to 2 meters for 1 hour. ■ ASA material is resistant to deterioration and discoloration from ultraviolet rays. Perfect for use as outdoor communication or network devices. ■ Uses self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening...

 Open the catalog to page 4
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-5

■ DXF/DWG/PDF/STP drawings available on our website. Customization for location change possible. Wall mounting bracket WGF series See page 112 Pole mounting bracket WGMB See page 113 ~ 114 and 205 ~ Pole mounting strap • belt SNB • PKB series See page 207 ~ 208 Tapping Standoff TPS series See page 397 Mounting plate WGP series See page 111 PCB mounting screw MT4-8T See page 112 Terminal block WTB series See page 115 DIN Rail FDR series See page 97 Cable gland See page 181 ~ 193

 Open the catalog to page 5
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-6

HIGH PERFORMANCE Outdoor Waterproof Box for 5G Technology! WG series WGPC series IP68 High performance at 24-hours/1m-depth immersion ASA material is resistant to deterioration and discoloration due to ultraviolet rays. Perfect for outdoor communication or network devices. With a silicone waterproof gasket, and supported by multiple enclosing screws from the rear side, it allows the enclosure to maintain a stable high waterproofing capability. Captive screws for easy maintenance There is no risk of screws dropping out and lost during maintenance. Captive screw is able to lock into a pre-drilled...

 Open the catalog to page 6
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-7

Optional terminal blocks compatible Optional terminal blocks, WTB series can be installed onto the existing bosses inside the WG • WGPC and WGV series box without additional processing or customization, hence can also function as a terminal junction box. (See page 115~116 for WTB terminal blocks.) Easy installation on walls & poles WALL MOUNTING BRACKET POLE MOUNTING BRACKET POLE MOUNTING STRAP

 Open the catalog to page 7
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-8

■ IP68 high performance plastic box protected from immersion as long as 24 hours at 1m depth. ■ ASA material is resistant to deterioration and discoloration from ultraviolet rays. PC/ASA material provides superior heat resistance and flame retardancy. Perfect for use as outdoor communication or network devices. ■ Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a thread into the holes at first so that the cover and body can be secured together properly. May become...

 Open the catalog to page 8
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-9

■ DXF/DWG/PDF/STP drawings available on our website. Series Light gray Product no. / Details External dimensions Accessories (Optional parts) Wall mounting bracket WGF series See page 112 Pole mounting strap • belt SNB • PKB series See page 207 ~ 208 Terminal block WTB series See page 115 Pole mounting bracket WGMB • WPMB • SSK series See page 113 ~ 114 and 205 ~ 206 Tapping Standoff TPS series See page 397 DIN Rail FDR series See page 97 Mounting plate WGP series See page 111 Protective vent PMF series See

 Open the catalog to page 9
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-10

Weather resistance refers to the property of polymer-based materials, such as plastics and paints, to resist degradation such as deformation, discoloration, and deterioration when used outdoors. The test data for our weather resistance waterproof/dustproof cases are as detailed below. Tester : Super Xenon Weather Meter SX75 - Suga Test Instruments Co., Ltd. (Testing under conditions closest to the spectral distribution of sunlight by utilizing a xenon lamp and filter system.) Irradiation Condition : 180 W/m2 at 300~400 nm Black Panel Temperature : 63±3°C Relative Humidity : Cycle Conditions :...

 Open the catalog to page 10
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-11

Accessories (Optional parts) series MOUNTING PLATE for WG • WGPC • WGV WGP dimensions ■ DXF/DWG/PDF/STP drawings available on our website.■ Hole milling, clinching spacer customizations are available. See page Custom-6 and our website for more details. Product no. / Details ■ Mounting screws included.

 Open the catalog to page 11
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-12

Accessories (Optional parts) ■ Self-tapping screws for board mounting on bosses inside WG, WGPC and WGV series enclosures. Product no. / Details Product no. Material Finish Pack of MT4-8T (Bind tapping M4-8) Steel Trivalent chromate 20 WALL MOUNTING BRACKET for WG • WGPC • WGV IPlEWl WGF dimensions ■ DXF/DWG/PDF/STP drawings available on our website. WGF-L

 Open the catalog to page 12
WGV series - IP68 PLASTIC ENCLOSURE with VENTILATION PLUG-13

Accessories (Optional parts) ■ DXF/DWG/PDF/STP drawings available on our website. WGMB dimensions ■ Hole milling is not required when installing the mount bracket, thus allowing the enclosure to maintain its IP rating. ■ WG • WGPC • WGV10-15-H and 15-16-H can be installed in both the W or D direction. ■ Pole mount is possible with the use of SNB or PKB series mounting belt. (See website) ■ Mounting stainless steel screw included. Installation example ■ DXF/DWG/PDF/STP drawings available on our website. ■ Pole mounting belt can be installed in either W or D direction. ■ Pole mount is possible...

 Open the catalog to page 13

All TAKACHI Electronics Enclosure Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.