VE7 series Accessories (Optional parts) ADHESIVE PROTECTIVE VENT FILTER Cross-section view Technical Data Protection class : Dustproof IP6X Attached on the enclosure interior : Waterproof IPX4, IPX7, IPX8 (2m depth/1h) Attached on the enclosure exterior : Waterproof IPX4, IPX5, IPX6, IPX7, IPX8 (2m depth /1h) ■ Vent filter protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ Excellent breathability of the vent filter adjusts the humidity inside the enclosure, suppressing condensation. ■ Highly water- and oil-repellent membrane protects electronic components from water, corrosive liquids, salts and dust. ■ The single-membrane structure allows the VE7 series to be used on both the interior and exterior of the enclosure, while demonstrating superior water resistance. ■ Recommended to be adhered onto flat plastic or metallic surfaces. ■ Perfect for use on outdoor lighting, drone motors, and other applications where high waterproofing capabilities are required. ■ Make sure that there are no burrs, etc. remaining on the attaching surface which may damage the vent filter. ■ An initial period of 24 hours is required for the adhesive to develop sufficient strength. Avoid using the vent filter with a heavy load. Furthermore, it is recommended to attach the product on a flat and perpendicular surface where water or other foreign material will not accumulate. ■ Remove any oil, water, dust or other foreign material, degrease and clean the attaching surface before attaching. When attaching, do not touch the effective diameter on the center of the product. ■ Use on industrial and electrical / electronic products only; not suitable to be used in medical, food and beverage, and cosmetic industries and related industrial equipment. Application example External Part name ■ Adhesive type protective vent filter can be installed on any flat surface. ■ These products are widely used for waterproofing on mobile devices. Product no. Outer diameter O Effective diameter O Standard thickness t Pack of

Accessories (Optional parts) Technical Data Protection class : Dustproof IP6X Attached on the enclosure interior : Waterproof IPX4, IPX7, IPX8 (2m depth/1h) Attached on the enclosure exterior : Waterproof IPX4, IPX5, IPX6, IPX7, IPX8 (2m depth /1h) ■ Vent filter protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ Excellent breathability of the vent filter adjusts the humidity inside the enclosure, suppressing condensation. ■ Highly water- and oil-repellent membrane protects electronic components...

Accessories (Optional parts) Cross-section view Technical Data Protection class : Dustproof IP6X Waterproof IPX4, IPX7 Airflow : 3,300ml/min/cm2 (at 7Kpa) Operating temperature : -40°C ~ +100°C ■ Vent filter protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ Allows water vapor molecules to diffuse through the microporous membrane. ■ Highly water and oil repellent membrane protects electronic components from water, corrosive liquids, salts and dust. ■ Easy installation adhesive filter. ■...

Accessories (Optional parts) PMF series PROTECTIVE VENT Application Example ■ Protective vent protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ IP68 protection class (2m depth / 1 hour) with an operating temperature range -40°C ~ +125°C allows them to be used in harsh environments. ■ PMF-12, PMF-12HA, and PMF-12P models are suitable for up to 5, 50, and 95 liters respectively. ■ Recommended to be installed on the sides of the enclosures. ■ Use on industrial and electrical / electronic...

Accessories (Optional parts) ■ Maintains exceptionally high airflow in extra-large enclosures with volumes of up to 200 liters in an outdoor environment. ■ Protective vent protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ Simple and flat design allows it to be used on a wide variety of enclosure types. ■ IP68 protection class rated (2m depth / 1 hour) with an operating temperature range of -40°C ~ +125°C allows it to be used in harsh environments. ■ Compliant with Solar industry testing...

Accessories (Optional parts) ■ Small and screw-in protective vent suitable for compact, and hand-held type devices. ■ IP68 protection class (water depth 2 meters / 60 mins) and -40°C ~ +150°C operating temperature range allows it to be used in various environments. ■ Suitable for enclosures with capacities of 2.0 litres or under. ■ For outdoor use, installation on the side of the enclosure unit is recommended. O-ring Thread size I Mount hole

Effect of PMF protective vent on WP series box WP series enclosure comes with a silicone gasket, which allows the enclosure to be airtight when assembled. When used in environments where there are large temperature fluctuations or differences, the internal and external pressure will become uneven. If this pressure within is unable to be properly vented, it may cause the enclosure to deform and warp. By installing the PMF series protective vent, it will assist in equalizing the air pressure, and prevent potential deformation. Test Conditions Device : Constant temperature/humidity test chamber...