TWH・TWE series - INTERCHANGEABLE HEAD TORQUE WRENCH

Product catalog summary

Overview
The document provides detailed information about the TWH series interchangeable head torque wrench and the TWE series open end interchangeable head. These tools are designed for tightening cable glands with specific torque requirements.

Specifications

The TWH series torque wrench has a length of 215 mm and a torque range of 0.5 to 5.0 N•m with increments of 0.05 N•m.
The TWE series includes various wrench sizes ranging from 8 to 36 mm, each with specific dimensions for width and thickness.

Usage Instructions

Begin tightening with a low torque value, then adjust to the appropriate torque for the specific cable and mounting part.
Read the operation manual available on the TAKACHI website before use.

Safety Precautions

Do not exceed the maximum torque value to avoid damage and injury.
Avoid using the wrench as a hammer or lever, and do not modify or disassemble it.
Inspect the wrench for damage before use and avoid using it with oily hands.
Wear safety glasses and ensure the wrench is not used underwater or in high-temperature environments.

Maintenance and Storage

Set the torque to the minimum value after use and clean the wrench before storing it in a dry place.

Product Compatibility
The document lists compatible models for various series (RM, AG, RPG, AGM, RSP, AGE, AGH) with specific cap and lock nut widths.

Contact Information
TAKACHI ELECTRONICS ENCLOSURE CO., LTD. provides contact details for further inquiries.

Catalog excerpts

TWH・TWE series - INTERCHANGEABLE HEAD TORQUE WRENCH-1

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque, and set the appropriate tightening torque for the cable and mounting part that will be tightened thereafter. Please read the operation manual (refer to TAKACHI website) before use to ensure correct and safe usage of the product. series OPEN END INTERCHANGEABLE HEAD Product no. / Details Note: These open end head is not subject to RoHS regulations.

Open the catalog to page 1

TWH・TWE series - INTERCHANGEABLE HEAD TORQUE WRENCH-2

Suitable TWE model RM • RMW series

Open the catalog to page 2

TWH・TWE series - INTERCHANGEABLE HEAD TORQUE WRENCH-3

Please read this manual carefully before use while following operation instructions. The manufacturer / retailer etc. will not be are not liable for any personal injuries, , damage to the product, or other property damage, etc. caused by improper use. * Do not use beyond the maximum torque value. This may cause damage and injury. * Do not use the torque wrench as a hammer or lever, or applying strong impact. * Do not modify or disassemble the torque wrench. These may cause strength or accuracy problems, which may lead to accidents and injuries. * Before use, check for damage, cracks, rust, or...

Open the catalog to page 3

TWH・TWE series - INTERCHANGEABLE HEAD TORQUE WRENCH-4

Handle center Torque scale 3⃣ How to use ① Push and hold the ring down to unlock. ・Turn the handle while the ring is in the unlock position. ③ Adjust to required torque. ・The ring will spring back to its original (lock) position. TAKACHI ELECTRONICS ENCLOSURE CO., LTD. TEL. +81-48-222-5409 https://www.takachi-enclosure.

Open the catalog to page 4