Technical Data Recommended torque : ■ Terminal junction box with built-in terminal block. ■ ABS and Glass fiber filled polycarbonate types are available. ■ TMB-4P • 6P • 10P is molded with Q21.0mm metric knock-outs for M20 cable glands. ■ To knock out the hole covers, rest a flathead screwdriver at the "A" points, and punch out the knock-outs by hammering on the rear end of the screwdriver handle with a hammer. Applicable crimp terminal R1.25-3.5 Accessories (Optional parts) ^Cover screw material : Stainless steel - 4P, 6P, and 10P models • Nylon - 15PCS, 20PC, and 20PCL models. Shorting bar SBR series See website Cable gland Mounting bracket CK-34Z

ABS UL94V-0 Models Product no. / Details Product no. L W H Number of poles Weight (g) ■ Drawings below are reference examples only. DXF/DWG/PDF drawings available on our website. ^021 knock-out also present on opposite side. TMB-6P ^021 knock-out also present on opposite side. TMB-10P ^021 knock-outs also present on opposite side.

Accessories (Optional parts) ■ SBR70-10P, SBR85-10P, SBR95-20P, and SBR95-20N can be cut accordingly into required poles. ■ PVC coated. SBR95-20 available in both PVC coated (SBR95-20P) and non PVC coated (SBR95-20N) models. ■ See chart below for suitable box. SBR95 -20P 20P 9.6mm TMA • TMB series (Not applicable for TMB-20P, TMA20P-AS, and TMA30P-AS models) SBR95 -20N 20P 9.6mm TMA • TMB series (Not applicable for TMB-20P, TMA20P-AS, and TMA30P-AS models) Product no. / Feature ■ Pack quantity differs by models. SBR70 - 2P 2P Brass Nickel plated Yes 10 SBR70 -10P 10P Brass Nickel plated Yes 1...

Accessories (Optional parts)BCM SERIES BLIND PLUG for BCAS • BCAL ■ Blind plug for BCAS • BCAL when installing hinges and latches. Not usable when using cover screws. Part name Material Color Blind plug ABS White gray Product no. Suitable box Pack of BCM-1 BCAS series (Not available for BCAS050604, 050605 models) 1 CK SERIES STAINLESS STEEL MOUNT BRACKET CK-34Z dimensions ■ CK-34Z model requires the use of MT4-10 screw. CK-34Z Stainless steel SUS304 Barrel finish BCAS series (Not applicable for BCAS050604, 050605 models) - 4 CK-35P Stainless steel SUS304 Barrel finish BCAS050604G, BCAS050605G...

■ Weatherproof cable gland equipped with high ultraviolet and degradation resistant silicone sealing insert and O-ring. ■ Recommended to use outdoors where waterproofing is critical. ■ Protection class equivalent to IP67. ■ DXF/DWG/PDF drawings available Please drill a proper thread hole into the enclosure for installation. Cap design varies by size RMW40 or smaller

RMW series silicone sealing insert weatherproof test report Object: Cut into a piece of the silicone sealing insert from RMW series and attach it onto an aluminium plate. For comparison, NBR sealing insert from our RM and EPDM sealing insert from another manufacturer is also attached. Testing conditions Equipment : Conditions : 7.5kW Super Xenon Weather Meter SX75 (Suga Test Instruments Co., Ltd.- http://www.sugatest.co.jp/english/) JIS B7754 : 1991 Testing with an authorized Xenon arc lamp weathering test equipment under the conditions denoted below. Irradiance : 180W/m2 at 300-400nm Black Panel...

Cable Gland Recommended Torque REFERENCE TABLE - RMW series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

series POLYAMIDE CABLE GLAND ■ Low cost cable glands made from polyamide material. ■ Wide selection, for M8 ~ M63, suitable for 01mm ~ 044 mm cable. ■ High oil resistant NBR rubber sealing and O-ring. ■ Protection class equivalent to IP67. Technical Data Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C *In-house test RM dimensions ■ DXF/DWG/PDF drawings available on our website. Cap design varies by size L H SW ■ Lock nut is not included for RM8S-2.5, 8S-4, and 10S-6 models. Please drill an appropriate thread hole into the enclosure for installation. Product no. /...

Cable Gland Recommended Torque REFERENCE TABLE - RM series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

RSP series STRAIN RELIEF CABLE GLAND ■ A total of 14 models available for selection. Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C ■ Strain relief cap protects cables by preventing it from bending beyond its limit and breaking.■ Economical price but high waterproofing capability equivalent to IP67. *In-house test ■ DXF/DWG/PDF drawings available on our website. ■ PA = Polyamide ComponentsProduct no. / Details Product no.

Cable Gland Recommended Torque REFERENCE TABLE - RSP series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...