
IP67 WEARABLE ENCLOSURE A stylish design enclosure with wrist strap, perfect solution for wearable devices. Stylish and luxurious mirror finish enclosure body Water-repellent comfortable silicone wrist strap High water resistance of IP67 withstands submersion in 1m depth for 30 minutes. Degradation resistant silicone gasket for long-lasting performance.
Open the catalog to page 1Tabbed battery and coin battery holder can be installed. For various wearable IoT devices Suitable for small IoT devices including LoRaWAN and Sigfox, detectors, RFID tags, GPS terminals and more. Environmental sensor Access control system Emergency alert system
Open the catalog to page 2■ Wearable enclosure with IP67 protection class (1m/30mins). Protection class : IP67 (30min / 1m-depth) Operating temperature Black (ABS) : -10°C ~ +60°C Off-white (ASA) : -30°C ~ +60°C Recommended torque : SMW-46^ : 0.2N • m SMW-50^ : 0.35N • m *May become brittle and break under impact when temperature is lowered close to -30°C. ■ A new type with 0.7 mm recess on the top cover has been added to the lineup. Perfect solution for attaching overlay sheets and filters. ■ Stylish and easy-to-wear design which suits any occasion. ■ Off-white models are made of weather-resistant ASA material. Suitable...
Open the catalog to page 3Accessories (Optional parts) SMW dimensions ■ DXF/DWG/PDF/STP drawings available on our website. Accessories (Optional parts) - COIN CELL BATTERY HOLDERS COMPATIBLE COIN CELL BATTERY HOLDERS CHART Product no. ■ Various coin cell battery holders can be stored. See coin cell battery holders on our website for more details. ■ Chart on the right is based upon mounting onto a 1.0mm thick PCB and attached to the top cover. ■ Please note that depending on the mounting location, PCB may not be able to be properly affixed on.
Open the catalog to page 4■ DXF/DWG/PDF drawings available on our website. ,j PCB layout top view Components Holder material Holder color Contact material Contact finish Glass fiber filled LCP (UL94V-0) Ivory Copper alloy Gold plated Product no. Matching battery Contact type Weight (g) Pack of How to replace a coin cell. Be careful not to damage the holder when removing the battery without tools. Recommended to use a fine tipped stick or a flat head screwdriver to remove the battery. PD SERIES BUTTON BATTERY HOLDER ■ DXF/DWG/PDF drawings available on our website. Installation hole layout Operating temperature: -40°C ~...
Open the catalog to page 5Bind head |takachi| Accessories (Optional parts) ■ Self-tapping screws for mounting PCB on bosses or standoffs.■ EM-3-6 self-tapping screws are suitable for mounting 1.6mm or thicker PCB. Product no. / Details ■ Material / Finish : Steel / Trivalent chromate Pan Steel Nickel plated Flat Steel Nickel plated Flat Steel Nickel plated LCT • LCS • LC115H-N / F2 / F3 / M2 / 9V
Open the catalog to page 636 Pages
23 Pages
6 Pages
35 Pages
17 Pages
7 Pages
28 Pages
28 Pages
36 Pages
8 Pages
38 Pages
10 Pages
5 Pages
7 Pages
1 Page
4 Pages
19 Pages
1 Page
1 Page
2 Pages
1 Page
290 Pages
332 Pages