
NEW COMPACT PLASTIC CASE for NEXT GENERATION IoT Stylish and elegant plastic case for use with all your IoT related devices SIC•SIM series Sleek & Glossy Finish High Performance Case Multipurpose & Wall Mount Models Available Multipurpose Model SIC series Wall Mount Model SIM series
Open the catalog to page 1COMPACT PLASTIC CASE for IoT DEVICES SIC • SIM series are snap-in type compact-sized plastic case without screws. Despite the small size, ample internal space is achieved by a snap-in assembly construction. A rounded design yet having flat surfaces enables easy customization such as hole milling or printing. Ideal for small IoT appliances such as LoRa WAN or Sigfox power-saving communication devices, RFID or GPS gadgets, or network sensors. Wall Mount Communication Network Device RFID Reader Remote Controller Security Sensor USB Data Logger
Open the catalog to page 2SIC series IoT SMALL PLASTIC CASE Protection class : IP40 Operating temperature Black (ABS) : -10°C ~ +60°C Off-white (ASA) : -30°C ~ +60°C *May become brittle and break under impact when temperature is lowered close to -30°C. ■ 4 new sizes added for a total of 23 different sizes available. ■ Small rounded design plastic case ideal for use as IoT devices. ■ Easy and tool-less assembly snap-in case. ■ While being small in size, there is ample internal space by utilization of the snap-in structure. ■ The polished surface also provides a high-end finish and gives off a superior quality and feel...
Open the catalog to page 3■ DXF/DWG/PDF/STP drawings available on our website. Base (Internal) Accessories (Optional parts) coin cell battery holders ■ Various coin cell battery holders can be utilized. See coin cell battery holders on our website for more details. ■ Please note that depending on the mounting location, PCB may not be able to be properly affixed on.
Open the catalog to page 4SIM series WALL MOUNT loT SMALL PLASTIC CASE Protection class: IP40 *May become brittle and break under impact when temperature is lowered close to -30°C. ■ 4 new sizes added for a total of 18 different sizes available. ■ Small rounded design plastic case ideal for use as IoT devices. ■ Easily attached to, or detached from the wall by using the wall mounting bracket. ■ Made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. ■ Dedicated PCB sizes for SIM5-7-0, 5-9-0, 6-7-0, and 6-12-0 are available. See PCB series on our website for details. Bracket...
Open the catalog to page 5■ DXF/DWG/PDF/STP drawings available on our website. Base (Internal) W *No changes to external height (H) when affixed onto the wall mounting bracket. Hole layout for wall mount 26 Hole layout for wall mount ■ M3 screws for installation of bracket on walls are not included. Product no. / Details Product no.
Open the catalog to page 6series LOW-COST UNIVERSAL PCB ooooooooooooo m m ooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo ooooooooooooooooo oooooooo -oooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooooooo oooooooo...
Open the catalog to page 7PORTABLE PLASTIC CASE ■ Easy replacement of batteries. Battery contact included in each case (except for N type). Technical Data ■ Select proper models by enclosure dimensions and capacity of the batteries. Typical Capacity : CR2032 : 225mAh / CR2450 : 620mAh / CR2477 : 1000mAh Protection class: IP40 Operating temperature: -10°C ~ +60°C ■ Suitable for remote controller, wireless key fob, or small tester/device, and more. ■ Available in 4 sizes with 8 models and selectable in 2 different color types (Black or White). No battery compartment type Battery compartment type Part name Color / Finish...
Open the catalog to page 8Coin Battery Contact Installation Steps ■E xclusive PCB is available as an optional part. See page 22 for more details. Refer to drawings on page 22 for suitable PCB dimensions and screw hole layout. ■ Battery contact parts are sold separately in case of damage or loss. See our website (CST series) for details. ■ When installing the battery terminal, make sure that it is parallel to the PCB. The battery may become stuck if installed at an angle. In addition, when mounting PCB, use a 1mm PCB. Please note batteries cannot be used with PCB thicker than 1mm. ■ DXF/DWG/PDF/STP drawings available on...
Open the catalog to page 9■ Simple snap-in case without screws. ■ Comfortable shape and hold. ■ 4 different colors are available for selection. ■ Suitable for use as a wireless device, remote control, key fob etc. ■ Designed with an easily accessible hole for strap attachment.
Open the catalog to page 10■ DXF/DWG/PDF/STP drawings available on our website. Accessories (Optional parts) - coin cell battery holders■ Various coin cell battery holders can be utilized. See coin cell battery holders on our website for more details. Refer to the chart for compatible holders. ■ Chart on the right is based upon mounting onto a 1.0mm thick PCB. COMPATIBLE COIN CELL BATTERY HOLDERS CHART
Open the catalog to page 11TW•TWN series MULTIPURPOSE PLASTIC ENCLOSURE Technical Data Protection class : IP40 Operating temperature : -10°C ~ +60°C ■ Universal plastic enclosure with screw fastening. ■ 26 sizes are available in 2 colors; Black (ABS UL94HB) and Off-white (ABS UL94V-0). ■ Suitable for measuring instruments, testing devices, wireless communication devices, medical devices, and more. Components No. Part name Bottom base Self-tapping screw Material : Color / Finish TW : ABSUL94HB / Black TWN : ABS UL94V-0 / Off-white TW : ABSUL94HB / Black TWN : ABS UL94V-0 / Off-white TW : Steel / Black trivalent chromate...
Open the catalog to page 12Color Type ■ DXF/DWG/PDF/STP drawings available on our website. Series Code Color Screw TW B Black Black trivalent chromate TWN W Off-white Nickel plated Internal dimensions w h (Self-tapping flat head) Weight (g) TW 4-2- 5B 35 20 50 28.2 12 32.6 M2.6-12 x 2 pcs 13.5
Open the catalog to page 1336 Pages
23 Pages
6 Pages
35 Pages
17 Pages
7 Pages
28 Pages
28 Pages
36 Pages
8 Pages
38 Pages
10 Pages
5 Pages
7 Pages
1 Page
4 Pages
19 Pages
1 Page
1 Page
2 Pages
1 Page
290 Pages
332 Pages