NEW COMPACT PLASTIC CASE for NEXT GENERATION IoT Stylish and elegant plastic case for use with all your IoT related devices SIC•SIM series Sleek & Glossy Finish High Performance Case Multipurpose & Wall Mount Models Available Multipurpose Model SIC series Wall Mount Model SIM series

COMPACT PLASTIC CASE for IoT DEVICES SIC • SIM series are snap-in type compact-sized plastic case without screws. Despite the small size, ample internal space is achieved by a snap-in assembly construction. A rounded design yet having flat surfaces enables easy customization such as hole milling or printing. Ideal for small IoT appliances such as LoRa WAN or Sigfox power-saving communication devices, RFID or GPS gadgets, or network sensors. Wall Mount Communication Network Device RFID Reader Remote Controller Security Sensor USB Data Logger

SIC series IoT SMALL PLASTIC CASE Protection class : IP40 Operating temperature Black (ABS) : -10°C ~ +60°C Off-white (ASA) : -30°C ~ +60°C *May become brittle and break under impact when temperature is lowered close to -30°C. ■ 8 new sizes added for a total of 19 different sizes available for selection. ■ Small rounded design plastic case ideal for use as IoT devices. ■ Easy and tool-less assembly snap-in case. ■ While being small in size, there is ample internal space by utilization of the snap-in structure. ■ The polished surface also provides a high-end finish and gives off a superior quality...

■ DXF/DWG/PDF/STP drawings available on our website. Base (Internal) ■ Various coin cell battery holders can be utilized. See coin cell battery holders on our website for more details. ■ Please note that depending on the mounting location, PCB may not be able to be properly affixed on.

SIM series WALL MOUNT loT SMALL PLASTIC CASE Protection class: IP40 *May become brittle and break under impact when temperature is lowered close to -30°C. ■ 6 new sizes added for a total of 14 different sizes available for selection. ■ Small rounded design plastic case ideal for use as IoT devices. ■ Easily attached to, or detached from the wall by using the wall mounting bracket. ■ Made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. ■ Optional universal PCB, PCB32-53 is compatible with SIM5-7-2 and 5-7-3 models. See PCB series on our website...

|takachi|■ DXF/DWG/PDF/STP drawings available on our website. Base (Internal) 'No changes to external height (H) when affixed onto the wall mounting bracket. ■ M3 screws for installation of bracket on walls are not included.

PORTABLE PLASTIC CASE ■ Easy replacement of batteries. Battery contact included in each case (except for N type). Technical Data ■ Select proper models by enclosure dimensions and capacity of the batteries. Typical Capacity : CR2032 : 225mAh / CR2450 : 620mAh / CR2477 : 1000mAh Protection class: IP40 Operating temperature: -10°C ~ +60°C ■ Suitable for remote controller, wireless key fob, or small tester/device, and more. ■ Available in 4 sizes with 8 models and selectable in 2 different color types (Black or White). No battery compartment type Battery compartment type Part name Color / Finish...

Coin Battery Contact Installation Steps ■E xclusive PCB is available as an optional part. See page 22 for more details. Refer to drawings on page 22 for suitable PCB dimensions and screw hole layout. ■ Battery contact parts are sold separately in case of damage or loss. See our website (CST series) for details. ■ When installing the battery terminal, make sure that it is parallel to the PCB. The battery may become stuck if installed at an angle. In addition, when mounting PCB, use a 1mm PCB. Please note batteries cannot be used with PCB thicker than 1mm. ■ DXF/DWG/PDF/STP drawings available on...

■ Simple snap-in case without screws. ■ Comfortable shape and hold. ■ 4 different colors are available for selection. ■ Suitable for use as a wireless device, remote control, key fob etc. ■ Designed with an easily accessible hole for strap attachment.

■ DXF/DWG/PDF/STP drawings available on our website. Accessories (Optional parts) - coin cell battery holders■ Various coin cell battery holders can be utilized. See coin cell battery holders on our website for more details. Refer to the chart for compatible holders. ■ Chart on the right is based upon mounting onto a 1.0mm thick PCB. COMPATIBLE COIN CELL BATTERY HOLDERS CHART

TW•TWN series MULTIPURPOSE PLASTIC ENCLOSURE Technical Data Protection class : IP40 Operating temperature : -10°C ~ +60°C ■ Universal plastic enclosure with screw fastening. ■ 26 sizes are available in 2 colors; Black (ABS UL94HB) and Off-white (ABS UL94V-0). ■ Suitable for measuring instruments, testing devices, wireless communication devices, medical devices, and more. Components No. Part name Bottom base Self-tapping screw Material : Color / Finish TW : ABSUL94HB / Black TWN : ABS UL94V-0 / Off-white TW : ABSUL94HB / Black TWN : ABS UL94V-0 / Off-white TW : Steel / Black trivalent chromate...

Color Type ■ DXF/DWG/PDF/STP drawings available on our website. Series Code Color Screw TW B Black Black trivalent chromate TWN W Off-white Nickel plated Internal dimensions w h (Self-tapping flat head) Weight (g) TW 4-2- 5B 35 20 50 28.2 12 32.6 M2.6-12 x 2 pcs 13.5

Accessories (Optional parts) Application example Installed onto SIC series ■ A total of 8 different sizes available for selection. ■ Strain relief cord protector helps relieve flex stress and prevents damage to cables. ^ Does not prevent cables from being dislodged. ■ 2 types - round and flat - are available. ■ Insert from the inner side of the case / panel of the enclosure. ■ Made from high heat resistant silicone material. Installation steps Technical Data CBS dimensions ■ DXF/DWG/PDF drawings available on our website. © Insert into the mounting hole from the inside. ® Thread the cable through...

Accessories (Optional parts) DST series DOUBLE-SIDED MOUNTING TAPE IBnewJ ■ Super strong double-sided mounting tape with excellent cold and heat resistance. ■ Allow cases to be attached onto any place. ■ Easily attached onto walls where holes cannot be drilled. ■ Can be used with a range of products, such as small IoT type enclosures. ■ Please ensure that surface is cleaned and grease-free before adhering. ■ Once removed, it cannot be adhered on again. Due to the strong adhesive strength, do ensure that the surface or product is suitable to be adhered onto. Adhesion Performance (90° peel adhesion)...