RSP series - STRAIN RELIEF CABLE GLAND
1 /5Pages

Catalog excerpts

RSP series STRAIN RELIEF CABLE GLAND ■ A total of 14 models available for selection. Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C ■ Strain relief cap protects cables by preventing it from bending beyond its limit and breaking.■ Economical price but high waterproofing capability equivalent to IP67. *In-house test ■ DXF/DWG/PDF drawings available on our website. ■ PA = Polyamide ComponentsProduct no. / Details Product no.

Open the catalog to page 1

RSP series - STRAIN RELIEF CABLE GLAND-2

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque,...

Open the catalog to page 2

RSP series - STRAIN RELIEF CABLE GLAND-3

Suitable TWE model RM • RMW series

Open the catalog to page 3

RSP series - STRAIN RELIEF CABLE GLAND-4

Please read this manual carefully before use while following operation instructions. The manufacturer / retailer etc. will not be are not liable for any personal injuries, , damage to the product, or other property damage, etc. caused by improper use. * Do not use beyond the maximum torque value. This may cause damage and injury. * Do not use the torque wrench as a hammer or lever, or applying strong impact. * Do not modify or disassemble the torque wrench. These may cause strength or accuracy problems, which may lead to accidents and injuries. * Before use, check for damage, cracks, rust, or...

Open the catalog to page 4

RSP series - STRAIN RELIEF CABLE GLAND-5

Handle center Torque scale 3⃣ How to use ① Push and hold the ring down to unlock. ・Turn the handle while the ring is in the unlock position. ③ Adjust to required torque. ・The ring will spring back to its original (lock) position. TAKACHI ELECTRONICS ENCLOSURE CO., LTD. TEL. +81-48-222-5409 https://www.takachi-enclosure.

Open the catalog to page 5