RSC series - IP67 SPLIT INSERT CABLE GLAND

Product catalog summary

Overview: This document provides technical specifications and usage instructions for various cable glands and torque wrenches, including the RSC series IP67 Split Insert Cable Gland, RMH series Multi-Hole Cable Gland, TWH series Interchangeable Head Torque Wrench, and TWE series Open End Interchangeable Head.

RSC Series IP67 Split Insert Cable Gland:

Features a split type sealing insert for cable protection with connectors.
Available in black and light gray with thread sizes M25×1.5 and M32×1.5.
Components include a cap, sealing insert, connector, sealing washer, and lock nut, primarily made of PA66 and silicone.
Technical data: Protection class equivalent to IP67, operating temperature -20°C to +80°C.

RMH Series Multi-Hole Cable Gland:

Designed to protect up to six cables with a single gland.
Available in black and light gray with thread sizes ranging from M12×1.5 to M32×1.5.
Components include a cap, sealing insert, connector, O-ring, and lock nut, made of PA66 and NBR.
Technical data: Protection class equivalent to IP65, operating temperature -20°C to +80°C.

TWH Series Interchangeable Head Torque Wrench:

Suitable for tightening cable glands with specific torque requirements.
Torque range from 0.5 to 5.0 N•m with increments of 0.05 N•m.
Not subject to RoHS regulations and does not include calibration services.
Usage instructions emphasize safety precautions and proper handling to avoid damage and injury.

TWE Series Open End Interchangeable Head:

Various sizes available to fit a range of cable gland sizes.
Not subject to RoHS regulations.

Safety Precautions:

Do not exceed maximum torque values to prevent damage and injury.
Avoid using the torque wrench as a hammer or lever.
Check for damage before use and avoid using with oily hands.
Wear safety glasses and ensure proper handling to prevent accidents.

Usage Instructions:

Set the torque before each use and ensure the handle lock is in the unlock position before adjusting.
Grip the center of the handle and tighten slowly to achieve correct torque values.
Stop tightening upon hearing or feeling a click to avoid overtorque.
Store the torque wrench in a dry place after cleaning post-use.

Catalog excerpts

RSC series - IP67 SPLIT INSERT CABLE GLAND-1

RSC series IP67 SPLIT INSERT CABLE GLAND ■ Split type sealing insert can protect cables with connector. Technical Data Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C *In-house test ■ DXF/DWG/PDF drawings available on our website. Product no. / Details

Open the catalog to page 1

RSC series - IP67 SPLIT INSERT CABLE GLAND-2

MULTI-HOLE CABLE GLAND ■ Multihole cable gland with M threads. ■ Multiple cables can be protected with single cable gland. ■ Equivalent to IP65 protection class. ■ Please use cables of the same diameter. Up to a maximum of 6 cables can be protected with 1 cable gland. Protection class : equivalent to IP65 Operating temperature : -20°C ~ +80°C *In-house test

Open the catalog to page 2

RSC series - IP67 SPLIT INSERT CABLE GLAND-3

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque,...

Open the catalog to page 3

RSC series - IP67 SPLIT INSERT CABLE GLAND-4

Suitable TWE model RM • RMW series

Open the catalog to page 4

RSC series - IP67 SPLIT INSERT CABLE GLAND-5

Please read this manual carefully before use while following operation instructions. The manufacturer / retailer etc. will not be are not liable for any personal injuries, , damage to the product, or other property damage, etc. caused by improper use. * Do not use beyond the maximum torque value. This may cause damage and injury. * Do not use the torque wrench as a hammer or lever, or applying strong impact. * Do not modify or disassemble the torque wrench. These may cause strength or accuracy problems, which may lead to accidents and injuries. * Before use, check for damage, cracks, rust, or...

Open the catalog to page 5

RSC series - IP67 SPLIT INSERT CABLE GLAND-6

Handle center Torque scale 3⃣ How to use ① Push and hold the ring down to unlock. ・Turn the handle while the ring is in the unlock position. ③ Adjust to required torque. ・The ring will spring back to its original (lock) position. TAKACHI ELECTRONICS ENCLOSURE CO., LTD. TEL. +81-48-222-5409 https://www.takachi-enclosure.

Open the catalog to page 6