RPG SERIES POLYAMIDE CABLE GLAND ■ Inexpensive cable glands made from polyamide material with PG threading. ■ High oil resistant NBR rubber sealing and O-ring. Technical Data ■ DXF/DWG/PDF drawings available on our website.

Cable Gland Recommended Torque REFERENCE TABLE - RPG series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

■ Weatherproof cable gland equipped with high ultraviolet and degradation resistant silicone sealing insert and O-ring. ■ Recommended to use outdoors where waterproofing is critical. ■ Protection class equivalent to IP67. ■ DXF/DWG/PDF drawings available Please drill a proper thread hole into the enclosure for installation. Cap design varies by size RMW40 or smaller

RMW series silicone sealing insert weatherproof test report Object: Cut into a piece of the silicone sealing insert from RMW series and attach it onto an aluminium plate. For comparison, NBR sealing insert from our RM and EPDM sealing insert from another manufacturer is also attached. Testing conditions Equipment : Conditions : 7.5kW Super Xenon Weather Meter SX75 (Suga Test Instruments Co., Ltd.- http://www.sugatest.co.jp/english/) JIS B7754 : 1991 Testing with an authorized Xenon arc lamp weathering test equipment under the conditions denoted below. Irradiance : 180W/m2 at 300-400nm Black Panel...

Cable Gland Recommended Torque REFERENCE TABLE - RMW series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

series POLYAMIDE CABLE GLAND ■ Low cost cable glands made from polyamide material. ■ Wide selection, for M8 ~ M63, suitable for 01mm ~ 044 mm cable. ■ High oil resistant NBR rubber sealing and O-ring. ■ Protection class equivalent to IP67. Technical Data Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C *In-house test RM dimensions ■ DXF/DWG/PDF drawings available on our website. Cap design varies by size L H SW ■ Lock nut is not included for RM8S-2.5, 8S-4, and 10S-6 models. Please drill an appropriate thread hole into the enclosure for installation. Product no. /...

Cable Gland Recommended Torque REFERENCE TABLE - RM series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

■ High water protection IP68 (1bar / 30min) polyamide cable gland. Protection class : IP68 1bar / 30min Operating temperature : -20°C ~ +100°C Compliant with EN50262 Ver. A ■ Wide selection, for M8 ~ M50, suitable for 02.5mm ~ 042 mm cable. ■ Super tough and superior heat resistant PA6GF (glass fiber filled PA6) material on cap and connector. ■ Safer halogen free, eco-friendly product. Thicker sealing insert evenly hold a cable by having a larger holding area. Remains durable even after repeated tightening / loosening. Lamellar insert type If over-tightened, it can cause the rubber bush or cable...

■ No optional sealing washer is required when installing on an even surface because of the built-in waterproof rib. ■ An optional sealing washer is required when installing on an uneven surface. (See website for more information on the optional sealing washer AGP series) Sealing washer Sealing washer ■ DXF/DWG/PDF drawings available on our website. ■ Lock nut is not included for M8 and M10 sizes. Please drill an appropriate thread hole into the enclosure for installation. Product no. / Details Product no. Black Thread size Cable range Mounting hole

Cable Gland Recommended Torque REFERENCE TABLE - AG series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

AGP SERIES SEALING WASHER for AG* AGSP ■ Sealing washer for AG series. ■ Made from oil resistant NBR material. ■ Use in the case of installation on a rough or uneven surfaces. ■ Selectable in 7 sizes (from M12 to M50) ■ Sealing washer is not necessary for installation on flat surfaces. Product no. D1 D2 M Suitable cable gland

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque,...