series RIGHT ANGLED CABLE GLAND ■ L-shape cable gland with M type threads.■ Allow wires to be routed vertically.■ Equivalent to IP67 protection class. Technical Data Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C *In-house test ■ DXF/DWG/PDF drawings available on our website. H Max SW

RSP series STRAIN RELIEF CABLE GLAND ■ A total of 14 models available for selection. Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C ■ Strain relief cap protects cables by preventing it from bending beyond its limit and breaking.■ Economical price but high waterproofing capability equivalent to IP67. *In-house test ■ DXF/DWG/PDF drawings available on our website. ■ PA = Polyamide ComponentsProduct no. / Details Product no.

Cable Gland Recommended Torque REFERENCE TABLE - RSP series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque,...

Suitable TWE model RM • RMW series

Please read this manual carefully before use while following operation instructions. The manufacturer / retailer etc. will not be are not liable for any personal injuries, , damage to the product, or other property damage, etc. caused by improper use. * Do not use beyond the maximum torque value. This may cause damage and injury. * Do not use the torque wrench as a hammer or lever, or applying strong impact. * Do not modify or disassemble the torque wrench. These may cause strength or accuracy problems, which may lead to accidents and injuries. * Before use, check for damage, cracks, rust, or...

Handle center Torque scale 3⃣ How to use ① Push and hold the ring down to unlock. ・Turn the handle while the ring is in the unlock position. ③ Adjust to required torque. ・The ring will spring back to its original (lock) position. TAKACHI ELECTRONICS ENCLOSURE CO., LTD. TEL. +81-48-222-5409 https://www.takachi-enclosure.