■ Aluminium case equipped with shockproof and anti-slip elastomer corner guards. ■ Suitable to be used as a fanless PC, power supply, power storage device etc. Carrying handle can withstand a maximum load up to 30.0 kg. ■ Corner guards are available in 4 different color variations. ■ Custom sizes available. ■ Aluminium case and corner guard with screw fastening. Included screws Case / Corner guard - M4-8 Hexagonal x 16 or 18 pcs Carrying handle - M5-8 x 4 pcs ^Hexagonal wrench included. ■ Top cover and base are covered with a protective film on one side.

Color Type BB Silver / Black Conductive BE Silver / Gray Conductive MCG dimensions ■ DXF/DWG/PDF/STP drawings available on our website. ProdUCt n°. I Dimensions ■ Please suffix color code at the end of the product number. Included screw : M4-8 Hexagonal : Steel : Black trivalent chromate x 18 pcs + Hexagonal wrench

MCGF SERIES CUSTOM SIZED ALUMINIUM CASE with CORNER GUARD Components ■ Hexagonal wrench included. ■ No. 5 and 6 are available for carrying handle types only. ■ Custom sized aluminium case with shockproof and anti-slip elastomer corner guards. ■ Adjustable sizes available in 1mm intervals, with W dimension from 150 ~ 500mm, D dimension from 150 ~ 400mm, and H dimension from 80 ~ 250mm. ■ Corner guards are available in 4 different color variations. ■ Customizable with, and without carrying handles. ■ A conductive coating is applied onto the internal surface, allowing it to be conductive.

1 Specify DimensionsSpecify dimensions in 1mm intervals. Caution ■ W / H / D dimensions are external dimensions of stainless steel case only. (Exclude corner guard dimensions) ■ Refer to the chart on page MCGF-3 for available dimensions. ■ Carrying handle is set to the center of top face. (Carrying handle is not available for D length of 224mm and smaller.) 3 Select Handle Type ■ Carrying handle model is not available for D length of 224mm and smaller. Confirm Product No. Confirm an assigned product number in the following order format as below.Product no. MCGF _-_- _ __ -W H D Color code Handle...

MCGF Size Chart Refer to the below chart for available sizes. ■ [－] sizes are not available. ■ Models with carrying handle, and W dimension of 200mm or larger requires 2 additional screws for assembly. 16 screw fixing points W 150～199 18 screw fixing points

Models with carrying handle, and W dimension of 200mm or larger requires 2 additional screws for assembly. W+16 Models with D dimension of 301mm or larger requires 2 additional screws for assembly. CUSTOMIZATION EXAMPLE PUNCH PRESS INKJET PRINTING SELF CLINCHING STANDOFF

MCGS series CUSTOM SIZED STAINLESS STEEL CASE with CORNER GUARD monttor ■ Adjustable sizes available in 1mm intervals, with W dimension from 150 ~ 500mm, D dimension from 150 ~ 400mm, and H dimension from 80 ~ 250mm. ■ Custom sized stainless steel case with shockproof and anti-slip elastomer corner guards. ■ Corner guards are available in 4 different color variations. ■ Customizable with, and without carrying handles. ■ SUS304 stainless steel allows the enclosure to be conductive. Part name Color / Finish Corner guard Case / Corner guard screw (Hexagonal M4-8) Carrying handle Carrying handle...

Specify dimensions in 1mm intervals. Caution ■ W, H and D dimensions are external dimensions of stainless steel case only. (Exclude corner guard dimensions) ■ Refer to the chart on page MCGS-3 for available dimensions. ■ Carrying handle is set to the center of top face. (Carrying handle is not available for D length of 224mm and smaller.) 2 Select Color Type B Black 3 Select Handle Type ■ Carrying handle model is not available for D length of 224mm and smaller. Gray handle ߄ Confirm an assigned product number in the following order format as below. Color code Handle Type Example : W = 222 mm,...

MCGS Size Chart Refer to the below chart for available sizes. ■ [－] sizes are not available. ■ Models with carrying handle, and W dimension of 200mm or larger requires 2 additional screws for assembly. 16 screw fixing points W 150～199 18 screw fixing points

Models with carrying handle, and W dimension of 200mm or larger requires 2 additional screws for assembly. W+16 Models with D dimension of 301mm or larger requires 2 additional screws for assembly. CUSTOMIZATION EXAMPLE PUNCH PRESS INKJET PRINTING SELF CLINCHING STANDOFF

SELF-CLINCHING STANDOFF / STUD / NUT Easy attaching of self-clinching fasteners into simple through-holes. A specialized press machine for clinching is utilized to ensure that the standoffs / studs / nuts are securely attached. 117 different kinds of standoffs / studs / nuts are available, in addition to a non-through hole concealed-head type. CONCEALED-HEAD SELF-CLINCHING STANDOFFS Installed into recessed pockets so that one side of the panel remains unmarked. Standoffs can be mounted onto 1.5mm or thicker material without requiring a through-hole to be milled. Concealed-head standoffs/studs...