*mydirectindustry

Catalogs
TAKACHI Electronics Enclosure Co., Ltd.
MBF series - CUSTOM SIZED ALUMINIUM CASE

MBF series - CUSTOM SIZED ALUMINIUM CASE

Product catalog summary

Overview of Custom Sized Enclosures
Takachi provides a range of custom-sized enclosures, including extruded aluminum and sheet metal models. These enclosures offer size adjustability, with extruded models allowing depth adjustments in 0.1mm or 1.0mm intervals, and sheet-metal models adjustable in width, depth, and height in 1.0mm intervals.

Extruded Aluminum Models
Available in standard and reinforced types, these models offer panel thickness options of 1.0mm, 1.2mm, and 1.5mm. Custom dimensions are possible within specified ranges, and a conductive coating is applied internally for earthing.

Sheet Metal Models
These models are made from stainless steel (SUS304) with a bright annealed finish, offering similar customization options as aluminum models, with panel thicknesses of 0.8mm, 1.0mm, and 1.2mm.

Customization Process
Customers can request custom sizes via the Takachi website by entering preferred dimensions on the custom size web quotation page. If unavailable, inquiries can be sent through the contact form. A product number is generated, and a sales representative provides a quote via email.

Specifications and Limitations
Both aluminum and stainless steel models have specific dimension ranges and panel thicknesses. Not all size combinations are feasible, and additional screws may be needed for larger dimensions. Detailed charts guide the selection of base types and panel thicknesses based on specified dimensions.

Lead Time
The lead time for custom sizes is approximately 5 business days for 1 to 10 pieces, and 8 business days if hole milling is required.

Overview of Inserts for Fastening Applications
This document compares and specifies different types of inserts used in fastening applications, focusing on Press-in inserts, Threaded inserts, and Heliserts, evaluating them based on strength, cost, and boss size requirements.

Comparison of Inserts

Strength: Heliserts and Threaded inserts are rated as excellent, while Press-in inserts are rated as good.
Cost: Press-in inserts are considered excellent in terms of cost, whereas Threaded inserts and Heliserts are average.
Boss Size: Heliserts require the smallest boss size, followed by Threaded inserts, with Press-in inserts requiring the largest.

Specifications

Press-in Inserts: Available in sizes M3 to M5 with varying outer diameters and lengths. For example, the SP-M3 has an OD of 8-10 mm and a length of 5.3 mm.
Threaded Inserts: Available in sizes M2.6 to M4 with specific outer diameters and lengths. For instance, the IRB-2603S has an OD of 5.5-6 mm and a length of 3.0 mm.
Heliserts: Available in sizes M2 to M3 with specific outer diameters and lengths. For example, the 2TNM-M2 has an OD of 4-5 mm and a length of 2.0 mm.

Materials
Inserts for plastic are available in brass (unfinished or nickel-plated) and stainless steel (unfinished).

Key Points
The document emphasizes the importance of selecting the appropriate insert type based on specific application requirements, considering factors such as strength, cost, and boss size.

Catalog excerpts

MBF series - CUSTOM SIZED ALUMINIUM CASE-1

VARIETY OF CUSTOM SIZED ENCLOSURES Extruded models are adjustable in extrusion length (depth) in 0.1mm or 1.0mm intervals. Sheet-metal models are adjustable in W/D/H dimensions in 1.0mm intervals. EXTRUDED ALUMINIUM MODEL 4 SIDE-EXTRUDED ALUMINIUM MODEL SHEET METAL MODEL FREE SIZE More custom sized models are available. https://www.takachi-enclosure.com/cat/flexible_size Custom-18

Open the catalog to page 1

MBF series - CUSTOM SIZED ALUMINIUM CASE-2

INQUIRING CUSTOM SIZED ENCLOSURESNavigate to the free-size product page you wish to inquire on our website and click on the button indicated by the arrow. Selectable 22 different Width/Height profiles and specified length (depth) from 40 to 500mm In 1mm Intervals. 16 different color combinations can be specified. CUSTOM SIZE WEB QUOTATION 3D View -16 color types 3D View-With tilt legs ■ If there is no "WEB QUOTATION" click button, please send us your inquiry from the "INQUIRY FORM" on the CONTACT tab on our website. Specify size D(depth) ■■■ Enter dimensions in 1mm intervals. *NOTE: Specified...

Open the catalog to page 2

MBF series - CUSTOM SIZED ALUMINIUM CASE-3

After entering the quantity, click on the button indicated by the ➡ arrow to generate a Product No. After entering your details and the message in our INQUIRY FORM, click on the CONFIRM button. A TAKACHI sales representative will get in touch with you with a quote via e-mail.

Open the catalog to page 3

MBF series - CUSTOM SIZED ALUMINIUM CASE-4

series CUSTOM SIZED ALUMINIUM CASE ■ Adjustable sizes available in 1mm intervals, with W and D dimensions from 50 ~ 500mm, and H dimension from 20 ~ 250mm. ■ A conductive coating is applied onto the internal surface, allowing for easy earthing. ■ Customization services are available (relevant drawings and data will be required). ■ Standard size MB series is also available. See MB series product pages for more information. ■ Cover • Base are covered with a protective film on one side.

Open the catalog to page 4

MBF series - CUSTOM SIZED ALUMINIUM CASE-5

To select D, W and H dimensions in 1mm intervals. Caution : Not all size combinations are possible. Refer to the table on page MBF-3 for further details ■ To select base type (thickness and structure) from the table below based on W / H / D dimensions specified. Refer to the table on page MBF-3 for A10, B12 or B15 type selection based on W, H & D dimensions. Base Type B (Reinforced) Base Type A (Standard) [A10] Type To determine a product number, fill W, H, D and select Base type in the following blank boxes. Numbering example: W:122 x H:70 x D:130 and A base type in panel thickness of 1.0mm...

Open the catalog to page 5

MBF series - CUSTOM SIZED ALUMINIUM CASE-6

CUSTOM SIZE WEB QUOTATION Send your inquiry via our online form now! Visit the MBF product page on our website, click on the "CUSTOM SIZE WEB QUOTATION" button, and fill in the required details. The product number will be generated, and once your information have been filled in, simply click on SUBMIT and await for our sales team's contact! Refer to the below chart for A10, B12 or B15 type selection by W, H & D dimensions. [A10] Type [B12] Type [B15] Type Standard • Panel thickness : 1.0mm Reinforced • Panel thickness : 1.2mm Reinforced • Panel thickness : 1.5mm ■ [ —] sizes are not available....

Open the catalog to page 6

MBF series - CUSTOM SIZED ALUMINIUM CASE-7

■ DXF/DWG/PDF drawings available on our website. Standard • Panel thickness : 1.0mm 4 (6) M3 Truss head screws *Screw number values within ( ) is applicable if D dimension is 301mm or larger. Caution : Refer to the available dimensions on the table. D dimension of 301mm and larger requires 2 additional screws for assembly. Reinforced • Panel thickness : 1.2mm Reinforced • Panel thickness : 1.5mm 4 (6) M3 Truss head screws ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Base Type • Panel thickness Caution : Refer to the available dimensions on the table. D dimension...

Open the catalog to page 7

MBF series - CUSTOM SIZED ALUMINIUM CASE-8

■ Adjustable sizes available in 1mm intervals, with W dimensions from 50 ~ 500mm, D dimensions from 50 ~ 500mm, and H dimensions from 20 ~ 250mm. ■ SUS304 stainless steel allows the enclosure to be conductive.

Open the catalog to page 8

MBF series - CUSTOM SIZED ALUMINIUM CASE-9

1 Specify Dimensions Specify dimensions in 1mm intervals. Caution : Not all size combinations are possible. Refer to chart for more information. ■ Panel thickness and base types vary by W / H / D dimensions. Refer to the chart on page MBS-3 for A08, B10 or B12 type selection by W, H & D dimensions. Confirm an assigned product number in the following order format as below. Product no. MBSW H D Base type Panel thickness Example : W = 122 mm, H = 70 mm, D = 130 mm, A base type in panel thickness of 0.8mm. Lead time Custom Size Only Custom Size + Hole Milling 9 business days (1 ~ 3 pcs) 10 business...

Open the catalog to page 9

MBF series - CUSTOM SIZED ALUMINIUM CASE-11

Standard • Panel thickness : 0.8mm 4 (6) M3 Truss head screws ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Caution : Refer to the available dimensions on the chart. D dimension of 301mm and larger requires 2 additional screws for assembly. 5 Reinforced • Panel thickness : 1.0mm Reinforced • Panel thickness : 1.2mm 4 (6) M3 Truss head screws W 50～500mm ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Caution : Refer to the available dimensions on the chart. D dimension of 301mm and larger requires 2 additional screws for assembly....

Open the catalog to page 11

MBF series - CUSTOM SIZED ALUMINIUM CASE-12

■ Adjustable sizes available in 1mm intervals, with W dimensions from 50 ~ 500mm, D dimensions from 50 ~ 400mm, and H dimensions from 25 ~ 200mm. ■ Wall mount flange holes available in 2 models: 2-hole, and 4-hole types. ■ A conductive coating is applied onto the internal surface, making earthing possible.

Open the catalog to page 12

MBF series - CUSTOM SIZED ALUMINIUM CASE-13

2 Select Flange-hole Type Confirm an assigned product number in the following order format as below. W H D Base type Panel thickness Flange hole Example : W = 155 mm, H = 80 mm, D = 200 mm, B base type in panel thickness of 1.2mm, 4 flange holes Lead time Custom Size Only Custom Size + Hole Milling 5 business days (1 ~ 3 pcs) 8 business days (1 ~ 3 pcs) Order Inquiry For more information, contact us here at [email protected] MBCF-2

Open the catalog to page 13

MBF series - CUSTOM SIZED ALUMINIUM CASE-15

MBCF dimensions Standard • Panel thickness : 1.2mm ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Caution：Refer to the available dimensions on the chart. D dimension of 301mm and larger requires 2 additional screws for assembly. Reinforced • Panel thickness : 1.2mm Reinforced • Panel thickness : 1.5mm 4 (6) M3 Truss head screws ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Base Type Caution：Refer to the available dimensions on the chart. D dimension of 301mm and larger requires 2 additional screws for assembly.

Open the catalog to page 15