ALUMINIUM CASE ■ Simple, low-cost aluminium case. Addition of 2 sizes for a total of 53 different selectable sizes. ■ The inner surface is unfinished, allowing the enclosure to be conductive. ■ Custom size available. ■ Drawings below are reference examples only. DXF/DWG/PDF drawings available on our website. Base : A type (Standard) MB8-6-33 model requires 2 additional screws for assembly. 4 Truss head screws Base : B type (Reinforced) Some models requires 2 additional screws for assembly. See chart on page MB-2 and drawings for further details. 4 Truss head screw

Insert nut adhesive standoff AST series See page 394

VENTILATED ALUMINIUM CASE ■ Ventilation holes are punched on the lower side of the cover (both sides) and the upper side of the base (one side) for enhancing airflow. ■ The internal surface is unfinished, making conductive and grounding possible.

■ Detailed DXF/DWG/PDF drawings available online. w Detail: Ventilation hole Number of Ventilation Hole Product no. Product no. / Details Product no. WHDabcde fgh Thickness Weight (g) Rubber feet B series See page Feet-1 Insert nut adhesive standoff AST series See page 394 Conductive screw EV3-5S See page EV-1 TORX screw MR3-5Z See page MR-1

■ Flanged aluminium case for wall mounting application. ■ Suitable for use as a switch box or controller. ■ The internal surface is unfinished, making conductive and grounding possible. ■ Custom size available. Accessories (Optional parts) MBC-1

|takachi| ■ Detailed DXF/DWG drawings available online.

series CUSTOM SIZED ALUMINIUM CASE ■ Adjustable sizes available in 1mm intervals, with W and D dimensions from 50 ~ 500mm, and H dimension from 20 ~ 250mm. ■ A conductive coating is applied onto the internal surface, allowing for easy earthing. ■ Customization services are available (relevant drawings and data will be required). ■ Standard size MB series is also available. See MB series product pages for more information. ■ Cover • Base are covered with a protective film on one side.

To select D, W and H dimensions in 1mm intervals. Caution : Not all size combinations are possible. Refer to the table on page MBF-3 for further details ■ To select base type (thickness and structure) from the table below based on W / H / D dimensions specified. Refer to the table on page MBF-3 for A10, B12 or B15 type selection based on W, H & D dimensions. Base Type B (Reinforced) Base Type A (Standard) [A10] Type To determine a product number, fill W, H, D and select Base type in the following blank boxes. Numbering example: W:122 x H:70 x D:130 and A base type in panel thickness of 1.0mm...

CUSTOM SIZE WEB QUOTATION Send your inquiry via our online form now! Visit the MBF product page on our website, click on the "CUSTOM SIZE WEB QUOTATION" button, and fill in the required details. The product number will be generated, and once your information have been filled in, simply click on SUBMIT and await for our sales team's contact! Refer to the below chart for A10, B12 or B15 type selection by W, H & D dimensions. [A10] Type [B12] Type [B15] Type Standard • Panel thickness : 1.0mm Reinforced • Panel thickness : 1.2mm Reinforced • Panel thickness : 1.5mm ■ [ —] sizes are not available....

■ DXF/DWG/PDF drawings available on our website. Standard • Panel thickness : 1.0mm 4 (6) M3 Truss head screws *Screw number values within ( ) is applicable if D dimension is 301mm or larger. Caution : Refer to the available dimensions on the table. D dimension of 301mm and larger requires 2 additional screws for assembly. Reinforced • Panel thickness : 1.2mm Reinforced • Panel thickness : 1.5mm 4 (6) M3 Truss head screws ※Screw number values within ( ) is applicable if D dimension is 301mm or larger. Base Type • Panel thickness Caution : Refer to the available dimensions on the table. D dimension...

VARIETY OF CUSTOM SIZED ENCLOSURES Extruded models are adjustable in extrusion length (depth) in 0.1mm or 1.0mm intervals. Sheet-metal models are adjustable in W/D/H dimensions in 1.0mm intervals. EXTRUDED ALUMINIUM MODEL 4 SIDE-EXTRUDED ALUMINIUM MODEL SHEET METAL MODEL FREE SIZE More custom sized models are available. https://www.takachi-enclosure.com/cat/flexible_size Custom-18

INQUIRING CUSTOM SIZED ENCLOSURESNavigate to the free-size product page you wish to inquire on our website and click on the button indicated by the arrow. Selectable 22 different Width/Height profiles and specified length (depth) from 40 to 500mm In 1mm Intervals. 16 different color combinations can be specified. CUSTOM SIZE WEB QUOTATION 3D View -16 color types 3D View-With tilt legs ■ If there is no "WEB QUOTATION" click button, please send us your inquiry from the "INQUIRY FORM" on the CONTACT tab on our website. Specify size D(depth) ■■■ Enter dimensions in 1mm intervals. *NOTE: Specified...

After entering the quantity, click on the button indicated by the ➡ arrow to generate a Product No. After entering your details and the message in our INQUIRY FORM, click on the CONFIRM button. A TAKACHI sales representative will get in touch with you with a quote via e-mail.

CUSTOM SIZED ALUMINIUM CASE ■ Adjustable sizes available in 1mm intervals, with W and D dimensions from 50 ~ 500mm, and H dimension from 20 ~ 250mm. ■ A conductive coating is applied onto the internal surface, allowing for easy earthing. ■ Customization services are available (relevant drawings and data will be required). ■ Standard size MB series is also available. See MB series product pages for more information. ■ Cover • Base are covered with a protective film on one side.

To select D, W and H dimensions in 1mm intervals. Caution : Not all size combinations are possible. Refer to the table on page MBF-3 for further details ■ To select base type (thickness and structure) from the table below based on W / H / D dimensions specified. Refer to the table on page MBF-3 for A10, B12 or B15 type selection based on W, H & D dimensions. Base Type B (Reinforced) Base Type A (Standard) [A10] Type To determine a product number, fill W, H, D and select Base type in the following blank boxes. Numbering example: W:122 x H:70 x D:130 and A base type in panel thickness of 1.0mm...