■ Snap-in battery box for enclosures. ■ Suitable to be installed into enclosures with a panel thickness of 1.0mm to 3.0mm. ■ Screw mounting is also possible with built-in M3 countersunk holes. ■ + © markings are available to avoid incorrect placement of the battery. ■ LD-006P box can be used with battery holder (see page SN • MP • BH211-1 ~ SN • MP • BH211-4). ■ Battery dimensions may vary depending on country and brand. Use optional battery cushion sponge to preventing rattling.

■ DXF/DWG/PDF drawings available on our website. ■ Battery contact position vary by models. ■ See page MP-1 for the details of battery snap. Mounting hole ^Snap-in mounting hole required would be D1 x W1 ~ W3. Hole dimensions Product no. W1 (thickness t = 1.0) W2 (thickness t = 2.0) W3 (thickness t = 3.0) D1 n ■ W1 ~ W3 values differ depending on panel thickness; see above table to determine required dimension. ■ For mounting on panel thickness not listed above, please confirm before proceeding.

■ Snap-in battery box for enclosures. ■ Suitable to be installed into enclosures with a panel thickness of 1.0mm to 3.0mm. ■ Screw mounting is also possible with built-in M3 countersunk holes. ■ Lead-free soldered lead wire (UL certified l = 140mm). ■ + © markings are available to avoid incorrect placement of the battery. ■ Battery dimensions may vary depending on country and brand. Use optional battery cushion sponge to preventing rattling.

■ DXF/DWG/PDF drawings available on our website. ■ Lead wire • battery contact position vary by models. ■ See page MP-1 for the details of battery snap. Mounting hole ^Snap-in mounting hole required would be D1 x W1 ~ W3 Hole dimensions Product no. W1 (thickness t = 1.0) W2 (thickness t = 2.0) W3 (thickness t = 3.0) D1 n ■ W1 ~ W3 values differ depending on panel thickness; see above table to determine required dimension. ■ For mounting on panel thickness not listed above, please confirm before proceeding. • Light gray PC+ABS Matching battery Weight (g) Suitable cushion sponge

Mount Example Operating temperature: -10°C ~ +60°C ■ Suitable to be installed into enclosures with material thickness of 1.0mm to 3.5mm. ■ Cover can be opened/closed without any tool for easy battery replacement. ■ 5 different battery layouts are available as AA x 2, AA x 3, AA x 4, AAA x 2 and AAA x 4. Each layout comes in 2 models: with lead-wire, and without lead-wire. ■ ©©markings prevents incorrect placement of battery. The dimensions of alkaline or manganese batteries may vary depending on country and brand. Use optional battery cushion sponge to prevent rattling.

Battery contact with lead wire for BC4-^ L and BC3-^ L models. Suitable to be installed into enclosures with material thickness of 1.0mm to 3.5mm. *Alkaline or manganese batteries

How to mount on the enclosures ■ Insert battery box into the milled hole first, and fit the frame on the back side. Once mounted, secure the frame with screws. ■ For BC3-4□ models, ▷ markings are shown on the frame. Install by matching the markings. Parallel circuit conversion on BC series battery box ■ BC-3□ models can be converted from a series to a parallel circuit. See below illustration for further details. ■ IT series (IT-3 models) optional battery contacts can be used for parallel circuit conversion. (See website for more information) ■ Use caution when installing or replacing the terminals...

Mount Example ■ BC series battery boxes can also be mounted on aluminium enclosures.