EXH • EXHE • EXHF • EXHFE series HEAT-SINK ALUMINIUM ENCLOSURE EXH • EXHE • EXHF • EXHFE series are aluminium enclosures with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation is required. Wide range of 64 different sizes available with EMC shielded and flanged models. Waved surface heat-sink fins for maximum cooling performance! ■ Each heat-sink fin has a waved surface construction for maximum cooling performance. Waved Surface HEAT DISSIPATION EXAMPLE ■ EXH series has grooves to put M3 nuts inside its heat-sink cover. It is possible to construct a heat conduction route from your heat source to heat-sink cover easily for better heat dissipation performance. Metal fitting bracket Heat dissipation Heat dissipation Heat source Heat source Metal spacer Sheet metal

CUSTOMIZATION EXAMPLE CNC Machining on Heat-sink Cover Heat-sink plates can be customized with our high speed CNC machines. Pin shaped heat-sink fin can be customized for better cooling performance. Color Anodization Various colors, such as blue, red, orange, green or purple can be anodized as per your requirements. ■ Not all colors and shades of colors are possible. Custom Length Available

APPLICATION EXAMPLE Stabilized Diode Laser Controller Laser Head UPS Battery Monitoring System

All-in-one Edge Node 4 Channel Power Switching Edge Node Ultra Low Noise Regulation Power Supply

■ Equipped with flanged bracket for easy wall mounting. ■ Aluminum enclosure equipped with a highly efficient heat-sink top cover. Color Type Silver / Silver Included screws EXHF23-Q 29-^ models : M5-10 x 8 pcs ^Hexagonal wrench included

EXHF dimensions |takachi| ■ DXF/DWG/PDF/STP drawings available on our website. top cover / Bottom frame length *Rubber feet dimensions are not included. ■ Custom length is available. ■ Flange bracket is installed as per the diagram below. ■ Grooves for M3 sliding nut are built into the heat-sink top cover and bottom frame (140mm or wider). Optional nut is available.

■ EMC shielding is achieved by having the unfinished internal parts of the enclosure, as well as the fabric-over-foam gasket, in contact with one another. ■ Aluminium enclosure equipped with a highly efficient heat-sink top cover. ■ Equipped with flanged bracket for easy wall mounting. Included screws EXHFE23-Q, 29-Q models : M5-10 x 8 pcs ^Hexagonal wrench included ■ Insert fabric-over-foam gaskets into the joint-grooves on ■ Ensure that a small portion of the fabric-over-foam both sides of the bottom cover. gaskets protrude out in order to maintain connections with

EXHFE dimensions |takachi| ■ DXF/DWG/PDF/STP drawings available on our website. Heat-sink top cover / Bottom frame length *Rubber feet dimensions are not included. ■ Flange bracket per the diagram ■ Grooves for M3 sliding nut are built into the heat-sink top cover and bottom frame (140mm or wider). Optional nut is available.

Accessories (Optional parts) ■ Wall mounting bracket for EX, EXH, and EXHE series. Applicable only for width 185, 230, and 285mm bottom covers. ■ Easy installation by inserting the nuts into built-in grooves on EX, EXH, and EXHE bottom cover. ■ Rubber feet are included to hide the mounting cutouts when not used for wall mounting, and act as feet stabilizers for desktop use. ■ DXF/DWG/PDF/STP drawings available on our website. Suitable models

series CUSTOM SIZED HEATSINK ENCLOSURE ■ Each heat-sink fin is constructed in a wave-like shape to maximize the heat dissipation effect. ■ Selectable in 19 different Width / Height types, with adjustable length (depth) in 1mm intervals from 40 to 500mm (80 to 500mm for flanged type). N (no flange type) and F (flange type) are available. ■ Custom sized aluminium enclosure equipped with a highly efficient heat-sink top cover. ■ Suitable to be used as a fanless PC, power amplifier, power supply etc., where heat dissipation is required. ■ See page EXHS-4 ~ EXHS-6 for Heat-sink top cover / Bottom...

1 Dimensions Width-Height dimension To select a Width-Height dimension number from the table below. W բ֠ ߄ (No flange type) and ݰ߄ (Flanged type) is selectable. Refer to 2 Flange selection below. D length To specify D length in 1mm interval between 40 ~ 500 mm. ߄ No flange type ݰ߄ Flanged type(187-բ֡, 232-□, 288-□) Heat-sink top c over / Bottom frame length ℓ ■ Both panel thickness added on Top cover/Bottom frame length is D length. Heat-sink topcover / Bottom frame length ℓ ■ D length can be specified in 0.1mm intervals with cutting tolerances at ±0.3mm. Cutting tolerance for 1.0 mm intervals...

■ DXF/DWG/PDF drawings available on our website. EXHS N type / F type (187-H • 232-^ • 288-^) ^ No flange bracket comes with N type. EXHS F type (814H • 106-H • 1414H) Included screws EXHS232-Q 288-^ models : M5-10x8pcs Hexagonal wrench included. ■ Grooves for M3 sliding nut are built into the heat-sink top cover and bottom frame (140mm or wider).Optional nut is available. Product no.

Cross-section view of heat-sink top cover & bottom frame EXHS81-31-□ ■ DXF/DWG/PDF drawings available on our website.

Cross-section view of heat-sink top cover & bottom frame EXHS187-44-□ ■ DXF/DWG/PDF drawings available on our website. Built-in groove ■ Optional M3 nut is available. Slidingnutcan be used onall EXHS models with width 140mm and larger bottom covers, as well as all h eat-sink top covers. SeepageEF-36 • MT-3N for MT-3N optionalM3 nut.

Cross-section view of heat-sink top cover & bottom frame ■ DXF/DWG/PDF drawings available on our website. Built-in groove ■ Optional M3 nut is available. Slidingnutcan be used onall EXHS models with width 140mm or larger bottom covers, as well as all heat-sink top covers. SeepageEF-36 • MT-3N for MT-3N optionalM3 n ut. Flange bracket dimensions (Section A)

■ Applicable to be used on EXS series with 185mm or larger bottom covers, and EXHS series with 187mm or larger bottom covers. MT-3N dimensions Product no. / Dimensions ■ Sliding nut can be used on all EXPS • EXPFS • EXWS • EXWFS • EXS models with width 140mm or larger bottom covers and with width 230mm and 285mm top covers, as well as on all EXHS models with width 140mm or larger bottom covers and on all heat-sink top cover sizes.