1. Catalogs
  2. TAKACHI Electronics Enclosure Co., Ltd.
  3. DRA series - DIN RAIL MOUNTING BASE

DRA series - DIN RAIL MOUNTING BASE

DRA series - DIN RAIL MOUNTING BASE

Product catalog summary
Overview: This document provides technical specifications and installation instructions for DIN rail mounting bases, specifically the DRT and DRA series. It includes product dimensions, materials, and weight, as well as installation notes and technical data.
Specifications:
  • DRT Series: Made from PC/ABS UL94V-0, light gray, with a weight of 7.3g. Maximum load capacity is 1kg.
  • DRA Series: Made from PPE: SB UL94V-1 and Nylon 66 UL94V-2, available in black and white, with weights ranging from 10.4g to 16.4g. Maximum load capacity is 5kg.
Installation Procedures:
  • For the DRT series, installation and removal are achieved by tilting the case at an angle and sliding it in or out.
  • For the DRA series, installation and removal are facilitated via a pull lever.
Installation Notes:
  • Ensure the enclosure length is ≤100mm from the center of the mounting base before installation.
  • Ensure the lever is not fully hidden behind the enclosure before installation.
Technical Data:
  • DRT Series: Maximum load of 1kg.
  • DRA Series: Maximum load of 5kg.
Additional Information: DXF/DWG/PDF drawings are available on the website for further reference.
See more

Catalog excerpts

DRA series - DIN RAIL MOUNTING BASE-1

[TAKACHlI Accessories (Optional parts) ■ NOTE Before installation, please ensure that the lever is not fully hidden behind the enclosure ■ For installation of enclosures, PCB and other parts onto a DIN rail. ■ Simple installation and removal via the pull lever. Technical Data ■ DXF/DWG/PDF drawings available on our website. Product no. Material (body) Material (lever) Color Weight (g) DRA-1 PPE : SB UL94V-1 Nylon 66 UL94V-2 Black : White 16.4 DRA-2 PPE : SB UL94V-1 Nylon 66 UL94V-2 Black : White 14.5 DRA-3 PPE : SB UL94V-1 Nylon 66 UL94V-2 Black : White 10.4 ■ DXF/DWG/PDF drawings available on our website. Before installation, please ensure that the length (from top) of the enclosure is equal to, or less than 100mm from the center of the mounting base. ■ For installation of enclosures, PCB and other parts onto a DIN rail. ■ Simple installation and removal by tilting the case at an angle and sliding it in/out.

 Open the catalog to page 1

All TAKACHI Electronics Enclosure Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.