Slim designed small type handheld enclosures with built-in coin cell battery compartment. Suitable for IoT device, Remote controller, Portable GPS, Wireless key-fob, RFID tag, small device, and more. 4 different sizes with 10 color variations each are available. ●Built-in battery compartment Light gray

APPLICATION EXAMPLE Motor Sport Infrared Laptimer (Bluetooth 4.0 & Android Application) Bluetooth Temperature Data Logger Impact Detection Sensor for Relay Tester Wireless Remote Control Switch Handi Quilter Easy-Set Tension™ Kit Wireless Microphone for Hearing Aid

High Frequency Preamplifier Indoor Environment Sensor Detection Sensor for Wandering Behavior Serial EEPROM Programmers

RFID Reader HoneyBee Proximity Switch Restroom Monitoring System Dual-frequency GNSS Receiver Wireless Connection Wired Connection Mobile Battery PC, Smart Phone, etc. PC, Smart Phone, etc. USB Cable

series PORTABLE PLASTIC CASE with SILICONE COVER ■ Small plastic case with silicone cover. Strong against drop impact while providing a secure grip. ■ Select proper models by enclosure dimensions and capacity of the batteries. ■ Suitable for remote controller, wireless key fob, small tester/device and more. ■ Available in 4 sizes with 16 models and selectable in 10 different color combinations. ■ 2 types of silicone cover available with (Open) and without (Closed) rectangular cutout on the top side. Battery compartment type Accessories (Optional parts) <D TORX screw MR1.6-6S See page 398

Silicone Cover Type Itakachi] Color Type Code E0 Black / Orange EM Black / Green EM Black / Cyan BE Black / Light gray BE Black / Black Code M0 White / Orange MM White / Green MM White / Cyan WE White / Light gray MB White / Black ■ DXF/DWG/PDF/STP drawings available on our website. CSS75/90 *1 CSS100 battery type varies by PCB placement: CR2450 with PCB on bottom cover, or CR2477 with PCB on top cover. See page 20 for the details. *2 Not compatible with Renata CR2477N battery. Product no. / Details ■ Please suffix color code at the end of the product number. Internal dimensions Battery compartment...

PORTABLE PLASTIC CASE ■ Easy replacement of batteries. Battery contact included in each case (except for N type). Technical Data ■ Select proper models by enclosure dimensions and capacity of the batteries. Typical Capacity : CR2032 : 225mAh / CR2450 : 620mAh / CR2477 : 1000mAh Protection class: IP40 Operating temperature: -10°C ~ +60°C ■ Suitable for remote controller, wireless key fob, or small tester/device, and more. ■ Available in 4 sizes with 8 models and selectable in 2 different color types (Black or White). No battery compartment type Battery compartment type Part name Color / Finish...

Coin Battery Contact Installation Steps ■E xclusive PCB is available as an optional part. See page 22 for more details. Refer to drawings on page 22 for suitable PCB dimensions and screw hole layout. ■ Battery contact parts are sold separately in case of damage or loss. See our website (CST series) for details. ■ When installing the battery terminal, make sure that it is parallel to the PCB. The battery may become stuck if installed at an angle. In addition, when mounting PCB, use a 1mm PCB. Please note batteries cannot be used with PCB thicker than 1mm. ■ DXF/DWG/PDF/STP drawings available on...

Accessories (Optional parts) ■ 2 types of silicone cover which have with (Open) and without (Closed) rectangular cutout on the front side; selectable in 5 different colors. Code 1(0] Orange p Green p Cyan m Light gray \E Black CSSC dimensionsComponents Part name Product no. / Details ■ Please suffix color code at the end of the product number. ■ Custom color is available from just 1 pc. For 500 pcs or more, manufacture costs will be similar to a standard color. Please inquire for more details. For custom color order, please specify PANTONE® color code.

Accessories (Optional parts) ■ Glass epoxy board (FR-4), through-hole on both sides and 2.54mm hole distance. ■ Prefabricated holes for battery contact use with CS • CSS case. The contact directions are printed on the PCB.

Accessories (Optional parts) ■ Battery contact for CR2032, CR2450, and CR2477 coin cells. ■ CST-2450 is not compatible with Renata CR2477N battery. ■ CSS and CS series enclosures comes with appropriate battery contacts. Use CST series as spares or replacements. Recommended PCB hole layout

Accessories (Optional parts) ■ Self-tapping screws for mounting PCB on bosses or standoffs.■ EM-3-6 self-tapping screws are suitable for mounting 1.6mm or thicker PCB. I M I Steel Nickel plated Nickel plated Nickel plated

Accessories (Optional parts) series SUSPENSION BRACKET ■ Plastic wall mounting bracket. Easy attachment and removal. Technical Data * The max load values listed are static load values only. Use caution when handling. ■ Large and small bracket types are available. ■ Applicable to be used on plastic or metallic enclosures with a panel thickness of 0.8 ~ 3.5mm. ■ To attach the suspension hook onto the enclosure, hole milling is required. ■ Please be aware of the insertion direction of the suspension hook against the mounting base when attaching. ■ DXF/DWG/PDF/STP drawings available on our website....

Accessories (Optional parts) Round magnet NEODYMIUM MAGNET ■ DXF/DWG/PDF drawings available on our website. ■ Material / Finish: Neodymium / Nickel plated ■ Please attach using a strong adhesive. Weight (g) Flux Density Absorption Round magnet with countersunk hole Countersunk size Weight (g) Flux Density Absorption Rectangular magnet with countersunk holes ■ Please fasten with a screw. Product no. a b c Countersunk size Weight (g) Flux Density Absorption Example 1 The magnetic force remains strong even through plastic. Make recessed pocket on the inside wall. CAUTION: Handle with care to avoid...