series IP65 DIECAST ALUMINIUM BOX Technical Data ■ This series is built to order. Able to order from just 1 piece. The delivery time is listed on page AL-2. Recommended torque: See page AL-2 ■ IP65 protection class and impact resistant diecast aluminium box. A large selection of 35 different sizes to choose from. ■ Diecast aluminium box has superior heat dissipation, heat resistance, and oil resistance compared to plastic box. ■ Self-tapping captive cover screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive cover screws for cutting a thread into the holes at first so that the cover and body can be secured together properly. Part name

Accessories (Optional parts) WGMB-2SW POLE MOUNTING BRACKET WGMB-2SW dimensions ■ Pole mount bracket made from robust diecast aluminium. ■ Bracket can be mounted on both vertically, and horizontally. ■ Sealing washers enables the installation to have a protection class equivalent to IPX7, X5. ■ Hole milling on enclosures is required when installing mounting bracket. ■ Pole mount is possible with the use of SNB or PKB series mounting belt. ■ Installation can be done on a variety of enclosures made from plastic, diecast aluminium or stainless steel. ■ DXF/DWG/PDF drawings available on our website....

SNB series Accessories (Optional parts) ■ Corrosion resistant stainless steel (SUS304) belt clamp. ■ It can be installed securely by tightening the screw. ■ 8 mm nut driver (box driver) is recommended for tightening. Minus screw driver can also be used.

Accessories (Optional parts) STAINLESS STEEL TIES for POLE MOUNTING ■ Corrosion resistant stainless steel (SUS304) cable tie. ■ Can be used to bundle cables or mounting enclosures to poles. ■ Self-locking bracket allows easy mounting / cable bundling. ■ Designed for one time use only (not reusable). ■ Suitable for easy mounting. ■ Wear gloves or other protections while installation. G3388 TIGHTEN GUN for SCT Note: Tighten gun is not subject to RoHS regulations.

Accessories (Optional parts) series POLE MOUNTING BELT PKB-10PM, 10P PKB-10S, 20S ■ Pole mounting belt for attachment of enclosures with suitable pole mount brackets or construction onto poles. ■ Designed for one time use only (not reusable). ■ Strong stainless steel clamping type and easy installation plastic type are available. ■ DXF/DWG/PDF drawings available on our website. Plastic stopper Stainless steel stopper Stainless steel belt Components Part name Product no. / Details Product no.

Accessories (Optional parts) ■ Stainless steel protective vent for superior durability and chemical resistance. ■ IP68 protection class (water depth 2 meters / 60 mins) and -40°C ~ +125°C operating temperature range allows it to be used in various environments. ■ Suitable for enclosures with capacities of 20 litres or under. ■ For outdoor use, installation on the side of the enclosure unit is recommended. ■ If used with a lock nut, material thickness should not exceed 4.0mm. • Metalic Q Housing I 0 Filter I 3 O-ring I □ Nut Thread size I Mount hole SW PMF-12M Stainless steel PTFE Silicone Brass...

Accessories (Optional parts) PMF series PROTECTIVE VENT ■ Protective vent protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ IP68 protection class (water depth 2 meters / 60 mins) with an operating temperature range -40°C ~ +125°C allows them to be used in harsh environments. ■ PMF-12 and PMF-12HS models are suitable for up to 5 and 50 liters respectively. ■ Recommended to be installed at the sides of the enclosure. ■ Use in industrial and electrical / electronic products only; not suitable...

Accessories (Optional parts) ■ Maintains exceptionally high airflow in extra-large enclosures with volumes of up to 200 liters in an outdoor environment. ■ Protective vent protects the enclosure from deformation by equalizing internal and external pressure differences, as well as venting the gas generated within the enclosure. ■ Simple and flat design allows it to be used on a wide variety of enclosure types. ■ IP68 protection class rated (water depth 2 meters / 60 mins) with an operating temperature range of -40°C ~ +125°C allows it to be used in harsh environments. ■ Compliant with Solar industry...

Accessories (Optional parts) ■ Rubber bush for TMC series terminal junction box. ■ Applicable for 08 ~ 09mm diameter cable. WATERPROOF WASHER ■ Waterproof washer for screwing onto waterproof boxes. ■ NBR sealing material has superior oil resistance (N models only). ■ Silicone sealing material has wider operating temperature with superior temperature and water resistance (S models only). ■ Shape of the sealing material vary by product. Washer material Sealing material SUS304 Screw size

series POLYAMIDE CABLE GLAND ■ Low cost cable glands made from polyamide material. ■ Wide selection, for M8 ~ M63, suitable for 01mm ~ 044 mm cable. ■ High oil resistant NBR rubber sealing and O-ring. ■ Protection class equivalent to IP67. Technical Data Protection class : Equivalent to IP67* Operating temperature : -20°C ~ +80°C *In-house test RM dimensions ■ DXF/DWG/PDF drawings available on our website. Cap design varies by size L H SW ■ Lock nut is not included for RM8S-2.5, 8S-4, and 10S-6 models. Please drill an appropriate thread hole into the enclosure for installation. Product no. /...

Cable Gland Recommended Torque REFERENCE TABLE - RM series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...