HEAT RESISTANT METAL CABLE GLAND Heat Resistant ■ Heat resistant sealing insert made of FPM material. Resistant up to 200°C ■ IP68 1bar / 30min high performance waterproof cable gland. Technical Data Protection class : Protection class IP68 1bar / 30min 10m depth immersion in 30 minutes Operating temperature : -40°C ~ +200°C Compliant with EN50262 Var. A Conventional cable gland Thicker sealing insert evenly clasp onto the cable by having a larger area. Remains durable even after repeated tightening / loosening. If over-tightened, it can cause the rubber bush or cable to deform, which may allow water to seep in. ■ Tightening torque varies depending on the cable diameter. Tighten until the sealing insert protrudes slightly from the cap. Part name Color / Finish Nickel plated Sealing insert Nickel plated Nickel plated

AGH dimensions ■ DXF/DWG/PDF drawings available on our website. Product no. / Dimensions Cable range Mounting hole

Cable Gland Recommended Torque REFERENCE TABLE - AGH series The table below details the reference tightening torque values recommended for tightening of the cable gland. Excessive tightening may damage, or cause deformation to the cable, or to the cable gland itself. It is recommended to both utilize the table as a reference when tightening, as well as performing actual field testing to ascertain if the product/s are suitable to be used under the required conditions. Precautions should be taken when tightening to prevent damage and deformation of the components. When tightening, the connector...

series INTERCHANGEABLE HEAD TORQUE WRENCH ■ Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately. Spanner head is not included. Product no. Length Torque range (N • m) Increments (N • m) The torque wrench is not subject to RoHS regulations. Since it is an OEM product and not a JIS-compliant product, no calibration services or inspection reports, etc. are provided. When tightening, proceed first with a low value (half of the reference) of the recommended torque,...

Suitable TWE model RM • RMW series