Factory Option Seed Beads Device View by video clip. Automatic color changing seed beads embroidery device By automating beads embroidery which was previously performed manually by craftsmen, mass production has been realized. i-TM - intelligent - Thread Management i-TM realizes thread tension that coincides with the characteristic of each stitch. By controlling the upper thread consumption volume, the digitally controlled motor provides the appropriate tension. As a result, problems such as the under thread coming out on the top of the fabric, the fabric becoming wrinkled, etc. are solved, and the unevenness of the embroidery finish for every head is prevented. ESQ-C (Easy Sequin Device Color Change Type) After simplifying the complicated application of sequins on a large scale, quality improvement and the minimizing of adjustment time has been realized. It has become much easier to change the type and size of sequin at will. The linked bead attachment can also be added as an option. Electronic Multi-he a d Autom atic Embroidery M achine The ultimate flagship model with unsurpassed SBC (Smart Bobbin Changer) View by video clip. flexibility powered by sophisticated features. Multicolor heads Head interval Replacement bobbins are held and set into their respective rotary hooks. Completed in only 6 seconds!! It takes the SBC only 6 seconds to replace the bobbins on all heads. Because replacement bobbins can be set beforehand while the embroidery machine is in operation, the downtime of the machine due to bobbin replacement can be drastically reduced. • Contact us for other specifications and more details. ● Specifications Mainshaft motor : AC servo motor X and Y axis motor : AC servo motor Revolution : Max. 1,100 rpm Power consumption : 1.2 kw Power supply : 3-phase 200-240 / 380 / 415V 50/60Hz Single-phase 200-240V Factory options : Automatic Lubrication system, Automatic Frame Changer, SBC (Smart Bobbin Changer), UBCII (Bobbin Changer II), ESQ-C (Easy Sequin Device Color Change Type), Sequin Device IV, Seed Beads Device, i-TM Dealer options : Multi Cording Device 2, Boring Device 2, Beam Sensor, Position Marker Please contact our distributor listed below. NO.1800 Ushiyama-cho, Kasugai, Aichi-pref. 486-0901 JAPAN TEL. + 81-568-90-6512, 6514, 6518 FAX. + 81-568-90-6513, 6515, 6519 *The actual embroidery area and embroidery speed may vary depending on the items being produced, the machine model, and the embroidering conditions. *Caution: No registered trademark or product design contained in this catalog may be used without prior permission from the manufacturer. * The specifications and designs of our products are subject

Electronic Multi-head Automatic Embroidery Machine Incorporation of the Digitally Controlled Presser Foot for secure fabric stability. The DCP can reduce fabric fluttering that occurrs during embroidery. It is especially effective when embroidering on thick fabric, thin fabric and folds of sewn fabric. Fabric flutters. Fabric does not flutter. Various operation switches and multi-color LEDs are located on each tension base. Since all of the main functions of the operation panel can be manipulated at each head, operator work efficiency has been improved. Commonly used functions may be assigned...