Model Specifications and Dimensions

The document details various models of Tajima electronic multi-head automatic embroidery machines, identified by model codes such as TMAR-K0902C through TMAR-K1508C. These models vary by needle count (9, 12, 15), head interval (2, 4, 6, 8), and frame types (Normal Wide Cap Frame, Semi-wide Cap Frame, Tubular Frame).

Embroidery space per head is specified with inside dimensions (Depth × Width) ranging mainly between 450×360 mm and 450×500 mm, with corresponding overall machine widths from approximately 2,260 mm to 5,260 mm depending on the model and head count. Heights and back dimensions are consistent around 1,355 mm (back) and 1,730–1,740 mm (overall height).

Frame Types and Features

• Slim Cylinder Bed: Newly designed with a 12% smaller diameter to accommodate tubular products like sleeves and pockets.
• Wide Cap Frame: Enhanced rigidity to support higher rotational speeds up to 1000 rpm (900 rpm for +4 mm models), improving embroidery stability.
• Reinforced Border Frame: Optional frame for improved embroidery quality on borders.

Performance and Operation

Maximum speed is up to 1,100 rpm, with power consumption up to 470W (910 VA). Machines support 3-phase 200V or single-phase 100V/200V power supply options.

The practical embroidery space and speed may vary depending on the product, machine model, and operating conditions.

Advanced Features and Options

• Digitally Controlled Presser Foot (DCP): Allows fabric pressing adjustment to prevent material damage and reduce fabric fluttering, especially effective on thick, stretchy, or hard-to-embroider materials like leather and quilting.
• FS Mode: Optimizes machine tuning to reduce yarn stress and improve embroidery stability and quality, particularly for soft twist and thick threads. Applicable only to tubular and border frames; may reduce rotational speed.
• Automatic Lubrication System, Sequin Devices III (Twin Type) and IV: Factory options enabling high-speed switching between different sequin types and support for various sequin shapes and sizes.
• Multi Cording Device 2: Dealer option allowing embroidery of up to 6 types/colors of cords.
• Additional Options: Beam sensor, LED light, underthread winder, border frame, semi-wide cap frame, pocket frame.

User Interface and Efficiency Enhancements

Each head is equipped with multiple operation switches and multi-color LEDs, including custom switches for frequently used functions, improving operator efficiency. A touch screen operation panel is also featured for intuitive control.

Usage Notes and Legal

The document emphasizes that actual embroidery area and speed depend on the product and conditions. It also notes that no registered trademarks or product designs may be used without prior permission from the manufacturer.

Contact and Manufacturer Information

Manufacturer: Tajima, located in Nagoya, Japan. Contact details and website links are provided for further inquiries.