Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Taizhou Juhang Automation Equipment Technology Co., Ltd
  3. JHA0110SR

JHA0110SR

JHA0110SR
1 / 1 PageView full catalog

JHA0110SR

Product catalog summary
Technical Specifications:
Model JHA0110SR is a rack and pinion pneumatic actuator with a cylinder size of 92 mm and a weight of 5.2 kg. It operates with clean, dry, and non-corrosive compressed air within a pressure range of 2 to 8 bar(g). The actuator is designed to function in various temperature conditions: high (-15 to 150℃), standard (-20 to 80℃), and low (-40 to 80℃). The stroke is 90±5° and it complies with EN 15714-3 & ISO 5211 standards. The flange types are F05 & F07, and the solenoid valve mounting interface follows VDI/VDE 3845 (NAMUR).
Dimensions:
The actuator's dimensions are specified in millimeters, with key measurements including a length of 268 mm and an air connection of G1/4”.
Performance Data:
The actuator's performance is detailed for various air supply pressures in both bar(g) and psi, with corresponding spring outputs at 0° and 90° positions. The spring types K6, K8, K10, and K12 provide different torque outputs, with specific values given for each pressure level.
Additional Information:
For further details on options, materials, certifications, and additional executions, contact JUHANG’s sales office. The document also provides conversion factors: 1 bar(g) = 14.5038 psi and 1 N.m = 8.8507 lbf.in.
See more

Catalog excerpts

JHA0110SR-1

Rack and Pinion pneumatic actuator Reference Parameters Cylinder size Cycle speed*① Pressure rang Clean,dry and non-corrosive compressed air > According to EN 15714-3 & ISO 5211 >*①. Test conditions: clean air with a pressure of 6 bar,the diameter of the pipe is 8 mm,and the temperature is room temperature. OUTPUT TORQUE (Unit:N.m) Air Supply Pressure in bar(g) Model Spring output OUTPUT TORQUE (Unit:lbf.in) Air Supply Pressure in psi Model Spring output Start > 1 bar(g) = 14.5038 psi ; 1 N.m = 8.8507 lbf.in > For further information regarding options , materials , certifications and additional execution please contact JUHANG’s sales office. > Flange and bi-square drive shall comply with ISO 5211 standard. > Solenoid valve mounting interface according to VDI/VDE 3845(NAMUR) TAIZHOU JUHANG AUTOMATION EQUIPMENT TECHNOLOGY CO.,LTD

 Open the catalog to page 1

All Taizhou Juhang Automation Equipment Technology Co., Ltd catalogs and technical brochures

  1. JHA1000SR
    JHA1000SR

    1  Page

  2. JHA1000DA
    JHA1000DA

    1  Page

  3. JHA0665SR
    JHA0665SR

    1  Page

  4. JHA0665DA
    JHA0665DA

    1  Page

  5. JHA0435SR
    JHA0435SR

    1  Page

  6. JHA0435DA
    JHA0435DA

    1  Page

  7. JHA0255SR
    JHA0255SR

    1  Page

  8. JHA0255DA
    JHA0255DA

    1  Page

  9. JHA0160SR
    JHA0160SR

    1  Page

  10. JHA0160DA
    JHA0160DA

    1  Page

  11. JHA0110DA
    JHA0110DA

    1  Page

  12. JHA0075SR
    JHA0075SR

    1  Page

  13. JHA0075DA
    JHA0075DA

    1  Page

  14. JHA0050SR
    JHA0050SR

    1  Page

  15. JHA0050DA
    JHA0050DA

    1  Page

  16. JHA0035SR
    JHA0035SR

    1  Page

  17. JHA0035DA
    JHA0035DA

    1  Page

  18. JHA0012SR
    JHA0012SR

    1  Page

  19. JHA0012DA
    JHA0012DA

    1  Page

  20. JUHANG Fx&JHM Series Manual Actuator-E-Catalogue
    JUHANG Fx&JHM Series Manual Actuator-E-Catalogue

    12  Pages

  21. JUHANG JHD Scotch Yoke Pneumatic Actuator-E-Catalogue
    JUHANG JHD Scotch Yoke Pneumatic Actuator-E-Catalogue

    15  Pages

Archived catalogs

  1. SCOTCH YOKE
    SCOTCH YOKE

    15  Pages

  2. Rotary actuator
    Rotary actuator

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.