JHA0012SR

JHA0012SR

Product catalog summary
Specifications:
Model JHA0012SR is a rack and pinion pneumatic actuator with a cylinder size of 40 mm and a weight of 1 kg. It operates with clean, dry, and non-corrosive compressed air within a pressure range of 2 to 8 bar(g). The actuator is designed to function in various temperature conditions: high (-15 to 150°C), standard (-20 to 80°C), and low (-40 to 80°C). The stroke is 90±5°, and it complies with EN 15714-3 & ISO 5211 standards. The flange types are F03 & F05.
Dimensions:
The actuator's dimensions are specified in millimeters, with key measurements including A: 37, B: 24, C: 45, D: 20, E: 60, F: 79, G: 15, H: 33, φI: 36, J: M5*8, φK: 50, L: M6*10, M: 11, R: 30, S: 80, X: M5*8, O: 40, U: 24, φd: 12, Z: 150, and an air connection of G1/4”.
Performance:
The actuator's cycle speed is less than 1 second for both opening and closing under test conditions of clean air at 6 bar pressure, with a pipe diameter of 7 mm at room temperature. The output torque is provided in both N.m and lbf.in units, with conversion notes included.
Spring Output:
Spring type K2 is used, with output values provided for various air supply pressures in both bar(g) and psi. The spring output varies with the angle (0° and 90°) and pressure, with specific start and end values detailed.
Standards and Interfaces:
The actuator's flange and bi-square drive comply with ISO 5211 standards, and the solenoid valve mounting interface follows VDI/VDE 3845 (NAMUR) standards.
Contact Information:
For further information regarding options, materials, certifications, and additional execution, contact JUHANG’s sales office at +86 576 87208157 or via email at [email protected]. More details can be found on their websites: www.tzjhkj.com and www.joinhanact.com.
See more

Catalog excerpts

JHA0012SR-1

Rack and Pinion pneumatic actuator Reference Parameters Cylinder size Cycle speed*① Pressure rang Clean,dry and non-corrosive compressed air > According to EN 15714-3 & ISO 5211 >*①. Test conditions: clean air with a pressure of 6 bar,the diameter of the pipe is 7 mm,and the temperature is room temperature. OUTPUT TORQUE (Unit:N.m) Air Supply Pressure in bar(g) Model Spring output OUTPUT TORQUE (Unit:lbf.in) Air Supply Pressure in psi Model Spring output Notes: > 1 bar(g) = 14.5038 psi ; 1 N.m = 8.8507 lbf.in > For further information regarding options , materials , certifications and additional execution please contact JUHANG’s sales office. > Flange and bi-square drive shall comply with ISO 5211 standard. > Solenoid valve mounting interface according to VDI/VDE 3845(NAMUR) TAIZHOU JUHANG AUTOMATION EQUIPMENT TECHNOLOGY CO.,LTD

 Open the catalog to page 1

All Taizhou Juhang Automation Equipment Technology Co., Ltd catalogs and technical brochures

  1. JHA1000SR

    1  Page

  2. JHA1000DA

    1  Page

  3. JHA0665SR

    1  Page

  4. JHA0665DA

    1  Page

  5. JHA0435SR

    1  Page

  6. JHA0435DA

    1  Page

  7. JHA0255SR

    1  Page

  8. JHA0255DA

    1  Page

  9. JHA0160SR

    1  Page

  10. JHA0160DA

    1  Page

  11. JHA0110SR

    1  Page

  12. JHA0110DA

    1  Page

  13. JHA0075SR

    1  Page

  14. JHA0075DA

    1  Page

  15. JHA0050SR

    1  Page

  16. JHA0050DA

    1  Page

  17. JHA0035SR

    1  Page

  18. JHA0035DA

    1  Page

  19. JHA0012DA

    1  Page

Archived catalogs

  1. SCOTCH YOKE

    15  Pages

  2. Rotary actuator

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.