1. Catalogs
  2. Taiyo Yuden
  3. Multilayer Chip Inductors for High Frequency HKQ series
video corpo

Multilayer Chip Inductors for High Frequency HKQ series

Multilayer Chip Inductors for High Frequency HKQ series
1 / 19 PagesView full catalog

Multilayer Chip Inductors for High Frequency HKQ series

Product catalog summary
Notice for TAIYO YUDEN Products

Reminders:
  • Product information is current as of October 2010 and may change without notice. Verify specifications before use.
  • Taiyo Yuden Co., Ltd. is not liable for defects under unspecified conditions.
  • Contact Taiyo Yuden for detailed specifications and validate products in actual conditions before shipment.
  • Products are for general electronics; for critical fields, contact Taiyo Yuden.
  • Not for use in aerospace, aviation, nuclear, or military applications.
  • Ensure high safety and reliability evaluations for equipment requiring such standards.
  • Products are valid only if purchased through official sales channels.
  • Taiyo Yuden is not responsible for intellectual property disputes from product usage.
  • Export may require specific procedures according to laws.

Features:
  • Multilayer inductors made of advanced ceramics with low-resistivity silver for excellent Q and SRF characteristics.
  • Designed for applications above 500MHz, suitable for portable telephones, PHS, W-LAN, and high-frequency circuits.

Ordering Code and Specifications:
  • Type: HKQ0603S - Multilayer chip inductors for high frequency.
  • External Dimensions: 0.6x0.3 mm.
  • Inductance Range: 0.6 to 22.0 nH with various tolerance codes.
  • Operating Temperature: -55 to +125°C.

Electrical Characteristics:
  • Inductance tolerance options include ±0.3nH, ±0.2nH, ±5%, and ±3%.
  • Rated current varies by inductance value, ranging from 600mA to 130mA.

Packaging:
  • Available in tape and reel packaging with standard quantities specified for each type.

Reliability Data and Specifications
  • Temperature and Humidity Testing: Testing conditions for various series of multilayer chip inductors and beads are outlined, with specific temperatures and humidity levels.
  • Product Specifications: Typical specifications for different series are provided, emphasizing checking detailed specifications on the manufacturer's website or CD catalogs.
  • Inductor Performance: Performance metrics such as impedance and inductance changes are specified under various conditions.
Precautions and Recommendations
  • Circuit Design: Importance of verifying operating environments and electrical ratings, especially for critical applications.
  • PCB Design: Impact of land pattern design and solder application on inductor performance, with recommended land dimensions.
  • Automatic Placement: Guidelines for mounting machine adjustments and adhesive selection to prevent damage during assembly.
  • Soldering: Recommendations for flux selection and soldering conditions to ensure optimal performance and reliability.
Technical Considerations
  • Mechanical Stress Management: Advises on minimizing mechanical stresses during PCB manufacturing processes.
  • Adhesive Application: Importance of using appropriate adhesives and application methods to maintain inductor integrity.

Flux Application and Soldering:
1. Excessive flux can lead to corrosion and affect solderability. A flux-bubbling system is recommended.
2. Water-soluble flux residues can degrade insulation resistance in humid conditions.

Soldering Procedures:
1. Preheating: Inductors should be preheated to 100-130℃ before soldering.
2. Reflow Soldering: Peak temperature should not exceed 260℃ for 10 seconds.
3. Wave Soldering: Similar temperature guidelines as reflow soldering.
4. Hand Soldering: Use a 20W soldering iron with a tip diameter of 1.0 mm or less.

Cleaning and Post-Cleaning:
1. Select cleaning solutions based on flux type.
2. Avoid excessive ultrasonic cleaning.
3. Resin coatings should not exceed the inductor's operating temperature.

Handling and Storage:
1. Use appropriate devices for board separation.
2. Handle inductors with non-magnetic tools and protect against ESD.
3. Store inductors below 40℃ and 70% RH, and use within 6 months.
See more

Catalog excerpts

Multilayer Chip Inductors for High Frequency HKQ series-1

11 notice_e-01 Notice for TAIYO YUDEN products@ Please read this notice before using the TAIYO YUDEN products. REMINDERS ¡ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ¡ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ¡ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ¡ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ¡ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called “TAIYO YUDEN’s official sales channel”). It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel. ¡ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ¡ Caution for export Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and Foreign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

 Open the catalog to page 1
Multilayer Chip Inductors for High Frequency HKQ series-2

78 11 mlci05_e-01 ¡ FEATURES ¡ ORDERING CODE ¡ EXTERNAL DIMENSIONS/STANDARD QUANTITY ¡ AVAILABLE INDUCTANCE RANGE ¡ APPLICATIONS – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Inductancem nHn 0.6 0.7 0.8 0.9 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 HKQ0603S iImax. [mA]j Operating...

 Open the catalog to page 2
Multilayer Chip Inductors for High Frequency HKQ series-7

mlci0109_reli_e-01 11 mlci0109_reli-PRP4 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Multilayer chip inductors and beads 3. Rated Current BK0402 240`540mA DC BK0603 100`500mA ‚c‚b BK1005 120`1000mA ‚c‚b BK1608 150`1500mA ‚c‚b BK2125 200`1200mA ‚c‚b ARRAY BK2010 100mA ‚c‚b BK3216 100`200mA...

 Open the catalog to page 7
Multilayer Chip Inductors for High Frequency HKQ series-8

mlci0109_reli-PRP5 11 mlci0109_reli_e-01 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Multilayer chip inductors and beads 5. Inductance BK0402 —— BK0603 BK1005 BK1608 BK2125 ARRAY BK2010 BK3216 BKP0603 BKP1005 BKP1608 BKP2125 CK1608 4.7`10.0ìHF}20% CK2125 0.1`10.0ìHF}20% CKS2125 1.0`10.0ìHF}20%...

 Open the catalog to page 8
Multilayer Chip Inductors for High Frequency HKQ series-9

mlci0109_reli_e-01 11 mlci0109_reli-PRP6 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Multilayer chip inductors and beads 6. Q BK0402 —— BK0603 BK1005 BK1608 BK2125 ARRAY BK2010 BK3216 BKP0603 BKP1005 BKP1608 BKP2125 CK1608 20 min. CK2125 15`20 min. CKS2125 —— CKP2012 CKP2016 CKP2520 NM2012...

 Open the catalog to page 9
Multilayer Chip Inductors for High Frequency HKQ series-10

mlci0109_reli-PRP7 11 mlci0109_reli_e-01 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Multilayer chip inductors and beads 8. Self Resonance Frequencyi SRFj BK0402 —— BK0603 BK1005 BK1608 BK2125 ARRAY BK2010 BK3216 BKP0603 BKP1005 BKP1608 BKP2125 CK1608 17`25MHz min. CK2125 24`235MHz min. CKS2125...

 Open the catalog to page 10

All Taiyo Yuden catalogs and technical brochures

  1. BD-R

    4  Pages

  2. Chip Antenna

    8  Pages

  3. Ferrite Cores

    7  Pages

  4. Wireless Module

    12  Pages

Archived catalogs

  1. CD-R

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.