*mydirectindustry

Catalogs
Taiyo Yuden
Common Mode Choke Coils (for DC and signal lines) SMD type

Common Mode Choke Coils (for DC and signal lines) SMD type

1 / 8 PagesView full catalog

Common Mode Choke Coils (for DC and signal lines) SMD type

Product catalog summary

Notice for TAIYO YUDEN Products

Reminders:

Product information is current as of October 2010 and may change without notice. Verify specifications before use.
Taiyo Yuden is not liable for defects from conditions outside specified parameters.
Contact Taiyo Yuden for detailed specifications and validate products in actual conditions before shipment.
Products are for general electronics; consult Taiyo Yuden for use in critical fields like transportation or medical.
Not suitable for aerospace, aviation, nuclear, or military applications.
Ensure high safety and reliability evaluations for equipment requiring such standards.
Products are valid only if purchased through official channels.
Taiyo Yuden is not responsible for intellectual property disputes from product use.
Export may require specific procedures under applicable laws.

Product Features:

Available in embossed tape and reel.
Highly coupled coil construction for common mode noise attenuation.
Prevents DC line noise and suppresses emissions from power supplies.
Suitable for reducing noise in digital cameras and computer peripherals.

Ordering Code and Specifications:

Common mode choke coils with various dimensions and shapes.
Specifications include impedance, DC resistance, rated current, and voltage.
Products are RoHS compliant.

Packaging and Reliability:

Minimum quantities vary by product type.
Packaging includes embossed tape with specific dimensions and reel sizes.
Reliability tests cover operating temperature, rated current, impedance, and more.
Tests include solderability, thermal shock, and high/low temperature life tests.

Recovery and Standard Conditions:
Testing duration is 1000±24 hours. Recovery should occur under standard conditions after removal from the test chamber. Measurements for CM01 should be taken within 2 to 48 hours, while CM04RC and BU05MC should be left for 1 to 2 hours. Standard conditions are 5 to 35℃ temperature, 45 to 85% relative humidity, and 86 to 106kPa air pressure. If results are questioned, tests should be conducted at 20±2℃.

Precautions:
This document provides typical specifications. For detailed information, refer to the website or CD catalogs. Products are intended for general electronic equipment and not for mission-critical systems. Contact TAIYO YUDEN for such uses.

Circuit Design and PCB Design:
Ensure operating environments are suitable for general electronic equipment. For PCB design, contact offices for land pattern recommendations. Reflow soldering is the applicable process, and mounting conditions should be checked beforehand.

Soldering:
Reflow soldering is recommended, and products should not be stressed until they return to normal temperature. For lead-free soldering, confirm adhesion and resistance to soldering heat. Recommended soldering iron conditions are specified for CM04RC, BU05MC, and CM01.

Handling and Mechanical Considerations:
Products should be kept away from magnets and magnetic objects. Care should be taken during board separation to avoid stress. Avoid mechanical shocks and excessive pressure on winding parts. Packing boxes should not be accumulated to prevent deformation.

Storage Conditions:
Maintain controlled temperature and humidity to preserve solderability and packing material condition. Recommended storage conditions are 0～40℃ and below 70% RH. Products should be used within one year of delivery, and solderability should be checked if stored over six months.

Catalog excerpts

Common Mode Choke Coils (for DC and signal lines) SMD type-1

11 notice_e-01 Notice for TAIYO YUDEN products@ Please read this notice before using the TAIYO YUDEN products. REMINDERS ¡ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ¡ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ¡ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ¡ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ¡ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called “TAIYO YUDEN’s official sales channel”). It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel. ¡ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ¡ Caution for export Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and Foreign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

Open the catalog to page 1

Common Mode Choke Coils (for DC and signal lines) SMD type-2

148 11 coil02_e-01 ¡ FEATURES ¡ ORDERING CODE ¡ EXTERNAL DIMENSIONS/MINIMUM QUANTITY ¡ APPLICATIONS ¡ OPERATING TEMP. – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Available in embossed tape and reel. Highly coupled coil construction ideal for common mode noise attenuation. Immunity against undesirable external...

Open the catalog to page 2

Common Mode Choke Coils (for DC and signal lines) SMD type-3

FERRITE PRODUCTS coil02_e-01 11 149 ¡ ELECTRICAL CHARACTERISTICS – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ¡Impedance -vs- Frequency characteristics iMeasured by HP4291Aj RC07 RC09 RC10 RC01 RC04 02T 08T Common mode Normal mode

Open the catalog to page 3

Common Mode Choke Coils (for DC and signal lines) SMD type-4

coil0102_pack_e-01 11 coil0102_pack-P1 ¡ PACKAGING – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ‡@Minimum Quantity Type Minimum Quantity (pcs.) Embossed tape CM01 m2 Linesn type 3000 CM04RC m2 Linesn type 1500 CM04RC 02T 1000 CM04RC 08T 2500 CM04RC m4 Linesn type 1000 BU05MC m2 Linesn type 2500 BU05MC m3 Linesn...

Open the catalog to page 4

Common Mode Choke Coils (for DC and signal lines) SMD type-5

co0102tr01_reli-RP1 11 co0102tr01_reli_e-01 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. Operating Temperature Range CM01 [40Ž`{105Ž CM04RC [25Ž`{105Ž BU05MC yTest Method and Remarksz Including self-generated heat 3. Rated current CM01 CM04RC Within the specified tolerance. BU05MC yTest...

Open the catalog to page 5

Common Mode Choke Coils (for DC and signal lines) SMD type-6

co0102tr01_reli_e-01 11 co0102tr01_reli-RP2 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 11. Solderability CM01 At least 90% of terminal electrode is covered by new solder. CM04RC At least 75% of terminal electrode is covered by new solder. BU05MC yTest Method and Remarksz CM01 CM04RCEBU05MC...

Open the catalog to page 6

All Taiyo Yuden catalogs and technical brochures

Archived catalogs

CD-R
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list