*mydirectindustry

Catalogs
Taiyo Yuden
Common Mode Choke Coil ( SMD) for High-Speed Differential Signal

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal

1 / 8 PagesView full catalog

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal

Product catalog summary

Notice for TAIYO YUDEN Products

Reminders:

Product information is current as of October 2010 and may change without notice. Verify the latest details before use.
Taiyo Yuden disclaims responsibility for defects under unspecified conditions in the catalog.
Contact Taiyo Yuden for detailed specifications and validate products in actual conditions before commercial use.
Products are for general electronics; for critical fields like transportation or medical, consult Taiyo Yuden.
Not suitable for aerospace, aviation, nuclear, or military applications.
Ensure high safety and reliability evaluations for equipment requiring such features.
Products are valid only if purchased from official sales channels.
Taiyo Yuden is not liable for intellectual property disputes from product usage.
Export may require specific procedures per regulations.

Product Features:

CM01 Series is a wire-wound common mode choke coil for noise suppression in high-speed differential signal interfaces.
Available in 1210 case-size with minimal transmission loss and high common impedance up to GHz range.
Models like CM01S600, CM01H900, CM01U900, CM01U161 cater to applications like USB3.0, HDMI, and LAN.

Ordering Code:

Type: CM (Common mode choke coil)
Impedance: 600 (60Ω), 900 (90Ω), 161 (160Ω) at 100MHz
Packaging: T (Taping)

Applications:

Noise suppression in interfaces like HDMI, USB2.0, and LAN.
Countermeasure for receiver sensitivity degradation in devices like smartphones.

Electrical Characteristics:

Impedance and transmission characteristics are specified for different CM01 types.

Packaging:

Minimum quantity and tape material specifications are provided for different types.

Reliability Data:

Operating temperature range, rated current, impedance, and other reliability tests are specified for CM01, CM04RC, and BU05MC types.

Specifications and Test Methods
CM01 components are tested at 105±2℃ with rated current for 1000±24 hours. Recovery should occur under standard conditions (5 to 35℃, 45 to 85% RH, 86 to 106kPa). Measurements for CM01 should be taken within 2 to 48 hours post-test, while CM04RC and BU05MC should be measured within 1 to 2 hours.

Precautions and Circuit Design
Products are for general electronic equipment, not mission-critical systems. For such applications, contact TAIYO YUDEN Sales Department.

PCB Design and Land Pattern
Contact the company for recommended land patterns. Reflow soldering is applicable, and mounting conditions should be checked beforehand.

Automatic Placement and Soldering
Avoid excessive impact during mounting. Reflow soldering is recommended, and stress should not be applied until the product returns to normal temperature. For lead-free soldering, confirm adhesion and resistance to soldering heat.

Cleaning and Handling
Contact the company for cleaning conditions. Keep products away from magnets, and avoid stress during board separation. Avoid mechanical shocks during handling and transportation.

Storage Conditions
Maintain storage temperature between 0～40℃ and humidity below 70% RH. Use products within one year of delivery, and check solderability if stored over six months.

Catalog excerpts

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-1

11 notice_e-01 Notice for TAIYO YUDEN products@ Please read this notice before using the TAIYO YUDEN products. REMINDERS ¡ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ¡ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ¡ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ¡ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ¡ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called “TAIYO YUDEN’s official sales channel”). It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel. ¡ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ¡ Caution for export Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and Foreign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

Open the catalog to page 1

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-2

146 11 coil01_e-01 ¡ FEATURES ¡ ORDERING CODE ¡ APPLICATIONS ¡ EXTERNAL DIMENSIONS/MINIMUM QUANTITY – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. CM01 Series is Wire-wound Structured Type Commom Mode Choke Coil which provides highly effective noise suppression characteristics without distorting the wave pattern...

Open the catalog to page 2

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-4

coil0102_pack_e-01 11 coil0102_pack-P1 ¡ PACKAGING – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ‡@Minimum Quantity Type Minimum Quantity (pcs.) Embossed tape CM01 m2 Linesn type 3000 CM04RC m2 Linesn type 1500 CM04RC 02T 1000 CM04RC 08T 2500 CM04RC m4 Linesn type 1000 BU05MC m2 Linesn type 2500 BU05MC m3 Linesn...

Open the catalog to page 4

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-5

co0102tr01_reli-RP1 11 co0102tr01_reli_e-01 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. Operating Temperature Range CM01 [40Ž`{105Ž CM04RC [25Ž`{105Ž BU05MC yTest Method and Remarksz Including self-generated heat 3. Rated current CM01 CM04RC Within the specified tolerance. BU05MC yTest...

Open the catalog to page 5

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-6

co0102tr01_reli_e-01 11 co0102tr01_reli-RP2 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 11. Solderability CM01 At least 90% of terminal electrode is covered by new solder. CM04RC At least 75% of terminal electrode is covered by new solder. BU05MC yTest Method and Remarksz CM01 CM04RCEBU05MC...

Open the catalog to page 6

Common Mode Choke Coil ( SMD) for High-Speed Differential Signal-7

co0102tr01_reli-RP3 11 co0102tr01_reli_e-01 ¡ RELIABILITY DATA – This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 17. Loading at high temperature life test CM01 Within the specified tolerance. CM04RC [ BU05MC yTest Method and Remarksz CM01 Temperature 105±2Ž Applied current Rated current Duration 1000±24hrs Recovery...

Open the catalog to page 7

All Taiyo Yuden catalogs and technical brochures

Archived catalogs

CD-R
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list