*mydirectindustry

EMC series

Product catalog summary

Specifications Overview:

This document provides detailed specifications for five models of machines: EMC-2240A, EMC2550, EMC-3060, EMC-3580, and EMC-35100. Key specifications include table size, T-slot dimensions, table load capacity, travel dimensions (X, Y, Z), spindle details, motor capacities, and operational requirements.

Table and Travel Specifications:

Table Size: Ranges from 54" x 14" for EMC-2240A to 112" x 30" for EMC-35100.
T-slot: Varies in number and dimensions, with EMC-2240A having 3 slots and others having 5 slots.
Travel: X travel ranges from 40" to 98.4", Y travel from 22" to 35", and Z travel from 20" to 26.3".

Spindle and Motor Specifications:

Spindle: All models have a spindle speed of 60~8,000 rpm and a spindle taper of CAT#40 or BT#40.
Motor: Spindle motor power ranges from 10 HP to 13.3 HP, with peak power up to 18 HP for 30 minutes.
Drive Motor: X, Y, Z motors are AC digital, with power ranging from 2.5 HP to 6 HP.

Operational Requirements:

Power: Approximately 24 HP to 28 HP required, with current ranging from 90A to 100A.
Air: 96 psi required.
Space: Floor space and minimum operation space dimensions are provided for each model.

Weight and Capacity:

Net Weight: Ranges from 8,360 lbs to 17,600 lbs.
Gross Weight: Ranges from 8,500 lbs to 18,700 lbs.
Tool Capacity: All models have a tool capacity of 24 pieces with a maximum tool diameter of 3.15" and weight of 15.4 lbs each.

Additional Notes:

The manufacturer reserves the right to modify specifications without notice. All specifications are for reference only.

Contact Information:

Contact details for Springwood Industrial, Inc., Klim Industrial, Inc., and the factory are provided for further inquiries.

Catalog excerpts

:TRAVEL WITHOUT SPLASHGUARD Note: The manufacture reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of machine without notice. All the specifications shown above are for reference only. Website: http://www.aceronline.net Springwood Industrial, Inc. E-mail Address: [email protected] Klim Industrial, Inc. E-mail Address: [email protected] Factory E-mail Address: [email protected]

Open the catalog to page 3

All Taiwan Trade Center, Chicago catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list