EtherCAT Slaves LITEON + TPM

Product catalog summary

Overview: This document outlines the specifications and features of the LITEON Industrial Automation Motion Controller RGE5032 and its associated components, focusing on compatibility, communication capabilities, and technical specifications.

Specifications:

Dimensions: 180 x 90 x 84 mm
CPU: 1 GHz with 4 coprocessors at 200 MHz
Memory: 20 MB program memory, 512 MB RAM, 100 MB work memory, 4 MB power-off holding, 8 GB eMMC
Power Supply: 24 VDC
Inputs/Outputs: 16 digital input/output points, 2 analog input points (0~10 V), 1 analog output point (0~20mA/0~24mA/4~20mA), 4 pulse input/output channels (200 kHz), 4 PWM channels (100 kHz)

Features:

High-speed Computing: 1 GHz CPU with 4 coprocessors, command speed of 1 ns
Storage: Ample program and work memory with power-off holding capability
EtherCAT Control: Supports SoftMotion and EtherCAT for up to 16-axis control
Communication Support: Compatible with EtherNet/IP, EtherCAT, and Modbus TCP/RTU (485)

Software and Compatibility:

Compatible with INDA4 and supports multi-language operation
Includes editors for IEC 61131-3 standards (LD/FBD/ST/SFC/IL/CFC)

Additional Components:

ISA-7X General AC Servo System: Features charge LED, 5-digit LED display, operation panel, and various communication ports
EtherCAT Modules: Various modules for analog and digital input/output, close-loop drive, and motion control with high transfer rates and easy installation

Installation and Usage: The document emphasizes easy installation with RJ45 phone jack and LED diagnostics, pluggable terminal blocks, and DIN rail mounting for various components.

EtherCAT Digital I/O Modules:

Models: 207-D411H-NNS/PPS, 207-D222-NNS/PPS, 207-D521-NNS/PPS, 207-D522-NNS/PPS, 207-D532-NNS/PPS, 207-D533-NNS/PPS
Features: Max. 100Mbps transfer rate, easy installation with RJ45 phone jack and LED diagnostic, pluggable terminal block with spring plug connectors, DIP switch for address setting, DIN rail mounting with varying dimensions.

Motion Controller RGE5032:

Software: Compatible with INDA4, supports Modbus communication, IEC 61131-3 editors, multi-language operation.
Specifications: Dimensions 180 x 90 x 84 mm, 1 GHz CPU, 4 coprocessors at 200 MHz, 20 MB program memory, 512 MB RAM, 100 MB work memory, 24 VDC power supply, various digital and analog input/output points, pulse input/output, PWM channels.
Features: High-speed computing, EtherCAT control, support for up to 16-axis, enhanced communication support including EtherNet/IP, EtherCAT, Modbus TCP/RTU.

General AC Servo System ISA-7X:

Features: Charge LED, 5-digit LED display for status and alarms, operation panel for settings, communication ports supporting RS-232 and RS-485, I/O ports for various controllers, motor encoder interface, control and main circuit terminals, internal and external regenerative resistors.
Interface: HMI and CODESYS control program support.

Catalog excerpts

Motion Controller  RGE5032  SVR-K221  207-M2A2-GEN General AC Servo System ISA-7X Industrial Automation

Open the catalog to page 1

ISA-7X General AC Servo System Features Drive Interface High-speed computing power 1GHz CPU with 4 coprocessors 200MHz Command Speed 1ns Storage space Program memory 20 MB, work memory 100MB Power-off Holding 4MB Charge LED Alit LED indicates that either power is connected to the servo drive or a residual charge is present in the drive's P_BUS EtherCAT control SoftMotion EtherCAT Enhance communication support Main circuit terminal 50/60Hz AC power supply Control circuit terminal L1c, L2c input 100~230V -• 50/60Hz 1 phase AC power supply *For detailed technical information, please refer to user...

Open the catalog to page 2

EtherCAT® Analog Slave207-A220FEtherCAT® Motion Slave207-C244C/D Features • Max. 100Mbps transfer rate • 8-Ch. 16-bit Analog input (AI) w. ±10V • Rotary switch for address setting • Easy installation with RJ45 phone jack and LED diagnostic • Pluggable terminal block with spring plug connectors • DIN rail mounting (L-122 x W-65 x H-104 mm) Features • Max. 100Mbps transfer rate • Rotary switch for address setting • Max. 4MHz Encoder input frequency • Easy installation with RJ45 phone jack and LED diagnostic • Pluggable terminal block with spring plug connectors • DIN rail mounting (L-122 x W-65...

Open the catalog to page 3

EtherCAT® 16-Ch.DI/O 207-D522-NNS/PPS EtherCAT® 64-Ch.DI/O Features • Max. 100Mbps transfer rate • Easy installation with RJ45 phone jack and LED diagnostic • Pluggable terminal block with spring plug connectors • DIP switch for address setting • DIN rail mounting (L-122 x W-65 x H-104 mm) ► 207-D411H-NNS 8-Ch. DI and 8-Ch. DO with NPN type ► 207-D411H-PPS 8-Ch. DI and 8-Ch. DO with PNP type Features • Max. 100Mbps transfer rate • Easy installation with RJ45 phone jack and LED diagnostic • Pluggable terminal block with spring plug connectors • DIP switch for address setting • DIN rail mounting...

Open the catalog to page 4

Intuitive software - Compatible with INDA4 - Table - structured Modbus communication command - Plan of equipment communication network easily - All editors of the IEC 61131-3(LD/FBD/ST/SFC/IL/CFC) - Support multi-language operation CODESYS Control Program LITEON Industrial Automation

Open the catalog to page 5

EtherCAT Slaves LITEON + TPM

EtherCAT Slaves LITEON + TPM

Catalog excerpts

All Taiwan Pulse Motion catalogs and technical brochures