STANDARD | SH-Type PTC has a unique heat property that allows the PTC heat output to be regulated by the airflow applied. The higher the airflow, the higher the heat output and power(wattage). Hence depending on the end design, if the ambient temperature is high, the PTC output power will decrease; if the airflow is high with low ambient temperature, then the PTC output power will increase. HEATERS KLC’s Standard PTC Air Heaters are designed with single stage heating (full power). However, SH type PTC Air Heaters can be designed with multiple power stages by heating one or two tubes at a time. This makes PTC Air Heater more economical through power saving and will also help extend heater life-time. If you require multiple stage heating in your application design, please contact our Sales Representatives in advance for special design and wiring. Wired Type No Terminals TO Order (Specify Model Number) Length unitmm Rated Max Max Inrush Power@Air Speed 6.4m/s Available Certification L LI Voltage Voltage Current 20 0 Frames A1 Dimensions and specifications may be changed without

TAIWAN KLC CORPORATION RAW MATERIALS HEALTH PRODUCTS METAL STAMPING CONTROLLERS Notes on PTC Air Heater Specifications Tables • Models with “ ” symbol are standard models. The delivery time for these models is shorter, and more cost saving. • The Power(W) in the Specifications table is based on PTC air heaters with Single Insulation(S) and fin pitch of 1.68mm(M) or 2.6mm(B). The Power(W) of PTC air heater with fin pitch 2.6mm(B) is 90% of PTC air heater with fin pitch 1.68mm(M). Please refer to "Notes on Part Numbering” for the difference in Power(W) efficiency for each fin pitch type and insulation...

STANDARD ||| SH-Type100 V-120 V TO Order (Specify Model Number) Length unitmrn Notes on PTC Air Heater Specifications Tables • Models with “ ” symbol are standard models. The celivery time for these models is shorter, and more cost saving. • The Power(W) in the Specifications table is based on PTC air heaters with Single Insulation(S) and fin pitch of 1,68mm(M) or 2.6mm(B). The Power(W) of PTC air heater with fin pitch 2.6mm(B) is 90% of PTC air heater with fin pitch 1.68mm(M). Please refer to "Notes on Part Numbering” for the difference in Power(W) efficiency for each fin pitch type and insulation...