SUCTION FILTER Suction Line Note: ID"16" has an O-ring groove on the companion flange. 1. Install TSF filter directly on top of tank. Secure the filter to companion flange seat with bolts firmly using d3 holes. 2. No oil outflow from case during checking or replacing of filter elements when extracting element upward from vertical housing. 3. Stainless steel wire elements of 60,100,150 and 200 mesh are provided as standard. 4. Either thread or flange (Additional Option) can be used 5. Relief valve (Additional option) opens at 40kPa. 6. Indicator (additional option) of either visual observation type to detect negative pressure or electric contact type (activation pressure 30kPa) can be installed. 7. Please contact us for use of fluids other than mineral oil on O-rings and other parts. Part List Flow Rate (G/min)