Website:
TAILOR PIXELS TECHNOLOGY CO., LTD.
Catalog excerpts
Manufacturer Certificated Product Specification Model: TWW160160B2-A0 160X160 COG Module This module uses RoHS material Tailor Pixels Technology Co., Ltd www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written.permission of Tailor Pixels Technology Co., Ltd.
Open the catalog to page 1
TAILOR PIXELS TECHNOLOGY CO., LTD. Specification Revision History Version First Issue
Open the catalog to page 2
TAILOR PIXELS TECHNOLOGY CO., LTD. CONTENTS GENERAL SPECIFICATIONS MECHANICAL DIMENSIONS BLOCK DIAGRAM INTERFACE PIN CONNECTIONS ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS BACKLIGHT OPTICAL CHARACTERISTICS OPERATING PRINCIPLES METHODS DISPLAY DATA RAM ADDRESS MAP POWER SUPPLY FOR LCM MODULE EXAMPLE RELIABILITY INSPECTION CRITERIA PRECAUTIONS FOR USING LCD MODULES USING LCD M
Open the catalog to page 3
TAILOR PIXELS TECHNOLOGY CO., LTD. GENERAL SPECIFICATIONS ITEM NUMBER OF GRAPHIC MODULE DIMENSION EFFECTIVE DISPLAY AREA DOT SIZE DOT PITCH LCD TYPE DUTY VIEWING DIRECTION OPERATING TEMPERATURE STORAGE TEMPERATURE BACK LIGHT TYPE BACK LIGHT COLOR APPROX. WEIGHT ROHS STANDARD
Open the catalog to page 4
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 5
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 6
TAILOR PIXELS TECHNOLOGY CO., LTD. Ground Command/Data Select This signal acts as the active-LOW write strobe, The bus data is latched on the rising edge of the signal This signal acts as the active-LOW read strobe Chip select, This active-LOW input enables the UC1698U series Reset signal Supply voltage for logic Data bit 0 Data bit 1 Data bit 2 Data bit 3 Data bit 4 Data bit 5 Data bit 6 Data bit 7 Backlight cathode No connect Backlight anode ABSOLUTE MAXIMUM RATINGS PARAMETER Supply voltage for logic Supply voltage for LCD Input voltage Output voltage Operating temperature Storage...
Open the catalog to page 7
TAILOR PIXELS TECHNOLOGY CO., LTD. System Bus Read/Write Characteristics (For the 8080 Series MPU) VDD=+3.3V±10%, VSS=0V, Ta=-30 to +85℃
Open the catalog to page 8
TAILOR PIXELS TECHNOLOGY CO., LTD. Backlight Type Backlight Type: LED Backlight color: white Power Supply For Backlight Absolute Maximum Rating PARAMETER Absolute maximum forward mA Ifm 80 current Peak forward current Ifp 1 MSEC plus 10% Duty Cycle 160 mA Reverse voltage VR 7.0 V Life Hour If(forward current) =60mA 80000 H Note: For operation above 25℃,Then Ifm Ifp must be decreased, the Current decreased is -1.08mA/℃ for DC drive and -2.58mA/℃ Pulse drive, the power dissipation is -4.5mＷ/℃.The product working current must not more than the 70% of the Ifm or Ifp according to the...
Open the catalog to page 9
TAILOR PIXELS TECHNOLOGY CO., LTD. Test instrument is LCD-5000,made in Japan Item Operating voltage Response time Contrast ratio Viewing angle range Definition Of Viewing Angle Note1: Definition of response time Note2: Definition of contrast ratio ‘Cr’ Note3: Definition of viewing angl
Open the catalog to page 10
TAILOR PIXELS TECHNOLOGY CO., LTD. Note4:Measuring Instruments For Electro-optical Characteristics NORMAL LIGHT SOURCE θ0 –θ=30 *1.Light source position for measuring the reflective type of LCD panel *2.Light source position for measuring the transflective / transmissive types of LCD panel
Open the catalog to page 11
TAILOR PIXELS TECHNOLOGY CO., LTD. OPERATING PRINCIPLES METHODS Control registers
Open the catalog to page 12
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 13
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 14
TAILOR PIXELS TECHNOLOGY CO., LTD. Command table
Open the catalog to page 15
TAILOR PIXELS TECHNOLOGY CO., LTD. Command description
Open the catalog to page 16
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 17
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 18
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 19
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 20
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 21
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 22
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 23
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 24
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 25
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 26
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 27
TAILOR PIXELS TECHNOLOGY CO., LTD.
Open the catalog to page 28
TAILOR PIXELS TECHNOLOGY CO., LTD. System reset can be initialized by setting RSTB terminal at low level when turning power on, receiving
Open the catalog to page 29
TAILOR PIXELS TECHNOLOGY CO., LTD. instruction from MPU. When RSTB becomes low, following procedure is occurred. - Display off - Display start line register become set by 0.(Z-address 0) While RSTB is low level, no instruction except status read can be accepted. Reset status appears at DB4. After DB4 is low, any instruction can be accepted. The Conditions of power supply at initial power up are shown in table 1. Table 1. Power Supply Initial Conditions Item Reset time Rise time POWER SUPPLY FOR LCM MODULE GND +3.3V
Open the catalog to page 30
TAILOR PIXELS TECHNOLOGY CO., LTD. /***************************************************** LCD controller uc1698 SEGMENT SEG112~SEG271 since the segment is dissymmetrical, do not use X-mirror extern MPU Crystal:20M *****************************************************/ #include #define uchar unsigned char #define uint unsigned int sbit cd=P3^7; sbit rst=P3^1; sbit cs=P3^4; sbit wr=P3^6; sbit rd=P3^5; #define dport P1 sbit key=P3^3; void init(void) datasheet { cs=0; //this subprogram is very important,please reference P50 of uc1698
Open the catalog to page 31
TAILOR PIXELS TECHNOLOGY CO., LTD. delay_ms(2); /**********************power control*********************/ write(0,0xe9); //27:Bias Ratio:1/10 bias write(0,0x2b); //6:power control set as internal power write(0,0x26); //5:set temperate compensation as -0.05% write(0,0x81); //11:electronic potentionmeter write(0,186); /**********************display control*******************/ write(0,0xa4); //16:all pixel off write(0,0xa6); //17:inverse display off /*************************lcd control********************/ write(0,0xc0); //19:partial display and MX disable,MY enable write(0,0xa3); //15:line...
Open the catalog to page 32
TAILOR PIXELS TECHNOLOGY CO., LTD. //18:display on,select on/off mode.Green Enhance mode disable /************************scroll line*********************/ write(0,0x40); //8:low bit of scroll line write(0,0x50); //8:high bit of scroll line write(0,0xc4); //19,enable FLT and FLB write(0,0x90); //14:FLT,FLB set write(0,0x00); uchar read(bit flag) { uchar temp; dport=0xff; cs=0; cd=flag; rd=0; wr=1; temp=P1; rd=1; return temp; } void write(bit flag,uchar dat) //flag=0,write command;flag=1,write data { cs=0; cd=flag; //flag=1,write command;flag=0,write data wr=0; rd=1; dport=dat; wr=1; } void...
Open the catalog to page 33All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures
-
TFT LCD serial for Smart Life11 Pages
