Manufacturer Certificated Product Specification Model: TTX156XHT -01 15.6″TFT Display Module (1920*1080) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com [email protected] Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

TAILOR PIXELS TECHNOLOGY CO., LTD Document Name Document No. Made/Revised Date Factory Code _______________________________________________________________________ _ All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code General Descriptions 1.1 Introduction The M156FHND0-R0 is a color active matrix LCD module incorporation Oxide TFT. It is composed of a TFT LCD panel, a backlight, a timing controller, voltage reference, common voltage, column driver, and row driver circuit. This TFT LCD has a 15.6-inch diagonally measured active display area with resolution 1,920 horizontal by 1,080 vertical pixel array. 1.2 Features ■ 15.6” IPS TFT LCD Panel ■ Supported 1,920x1,080 Pixels Resolution ■ Compatible With...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made/Revised Date Factory Code 1.4 Functional Block Diagram Figure 1 Shows the functional block diagram of the LCD panel. Figure 1 Block Diagram _______________________________________________________________________ _ All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code Absolute Maximum Ratings Table 1 Absolute Ratings of Enviroment Item Supply Voltage Input Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity (A)Maximum Wet-Bulb temperature should be 39℃ and no condensation of water. (B)When you apply the LCD module for OA system. Please make sure to keep the temperature of LCD module under 60℃. (C)Storage /Operating temperature & humidity： Figure 2 Absolute Ratings of Environment of the LCD Module _______________________________________________________________________...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code Pixel Format Image Figure 3 shows the relationship of the input signals and LCD pixels format image. Figure 3 Pixel Format _______________________________________________________________________ _ All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code Optical Characteristics The optical characteristics are measured under stable conditions at 25℃ (Room Temperature) : Table 2 Optical Characteristics Specification Item Horizontal Viewing Angle [degrees] Contrast Ratio Rising +Falling Color /Chromaticity Panel Transmittance [%] Note: A. Measurement Setup The LCD module should be stabilized at 25℃ for 15 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made/Revised Date Factory Code Figure 4 Measurement Setup B. The LED input parameter setting as: V_LED: 12V (±0.1V) PWM_LED: duty 100 % C. Definition of Viewing Angle Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180° horizontal an 180°vertical range (off-normal viewing angles). The 180°viewing angle range is broken down as follows; 90° horizontal left and right and 90°(ψ) vertical, high (up) and (θ) low (down). The measurement direction is typically perpendicular to the display surface with the...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made/Revised Date Factory Code D. Definition Of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63, L0: Luminance of gray level 0 E. Definition Of Response Time (Tr ,Tf) The output signals of DMS 1140 or equivalent are measured when the input signals are changed from “Black” to “White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval between the 10% and 90% of amplitudes. Figure 6 Definition...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code Backlight Characteristics(Reference) Table 3 Backlight Characteristics Symbol VLED Voltage Output PWM frequency Note A Hours Ta=25[deg C] Note C - Voltage PWM Duty ratio Note A: Calculator value for LED chip specification. Note B: The LED life time define as the estimated time to 50% degradation of initial luminous. Note C: ILED=20 mA (Per LED) _______________________________________________________________________ _ All rights strictly reserved reproduction or issue to third parties...

TAILOR PIXELS TECHNOLOGY CO., LTD. Document Name Document No. Made By Made/Revised Date Department Factory Code Interface Connector Table 4 Signal Connector Name / Designation Type / Part Number Mating Receptacle/Part Number Table 5 Signal Connector Pin Assignment Pin Signal Name Complement Signal Link Lane 1 True Signal Line 1 Complement Signal Link Lane 0 True Signal Line 0 True Signal Auxiliary Ch. Complement Signal Auxiliary Ch. LCD Logic and Driver Power LCD Logic and Driver Power Backlight On/Off System PWM Signal Input for Dimming _______________________________________________________________________...