Website:
TAILOR PIXELS TECHNOLOGY CO., LTD.
Catalog excerpts
Manufacturer Certificated Product Specification Model: TTX133XHT -01C 13.3″TFT Display Module (1920*1080) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.
Open the catalog to page 1
TAILOR PIXELS TECHNOLOGY CO. LTD. DOCUMENT REVISION HISTORY GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS INPUT TERMINALS ABSOLUTE MAXIMUM RATINGS TIMING CHARACTERISTICS OF INPUT SIGNALS INPUT SIGNAL, BASIC DISPLAY COLORS AND GRAY SCALE OF EACH COLOR OPTICAL CHARACTERISTICS SUGGESTIONS FOR USING LCD MODULES ENVIRONMENTAL / RELIABILITY TEST PACKING SPECIFICATION(REFERENCE ONLY)
Open the catalog to page 2
TAILOR PIXELS TECHNOLOGY CO. LTD. 1.Document revision history: DOCUMENT REVISION First Release.
Open the catalog to page 3
TAILOR PIXELS TECHNOLOGY CO. LTD. Size 13.3 inch 1920(horizontal)x1080(Vertical) Resolution Interface eDP1.2/2.7Gbps/2lane Connect type 20455-030E-76 (I-PEX) Color Depth 16.7M A-si Technology type Display Spec. Pixel pitch (mm) 0.153 x 0.153 Pixel Configuration R.G.B. Vertical Stripe Display Mode Normally Black TP Driver IC GT9110 LCD Surface Treatment Anti-glare coating:(3H) Viewing Direction U/D/L/R:85/85/85/85 1000(TYP.) Contrast Ratio Color gamut 72% Luminance(cd/m2) 250(TYP.) Consumption of Power LCD：1.8(W)(Max.)(White Pattern) BL： 4.5W(W)(Max.)(w/o Driver) LED Numbers 54 LEDS Weight...
Open the catalog to page 4
PULL DIRECTION 背光电路图(CIRCUIT DIAGRAM): Figure 1: Outline Drawing Notes: 1.Unit:mm 2.Do not scale drawing. 3. Modification rev.number. 4.Genral Tolerance:±0.2mm 5."*" For important dimension;( ) for reference dimention
Open the catalog to page 5
Back View Side View 图纸名称：TP结构图 客户名称： Front View REVISION RECORD
Open the catalog to page 6
Front View Side View Back View TAILOR PIXELS TECHNOLOGY CO. LTD. cover lens T=0.7mm 全贴OCA T=0.2mm Full viewing PULL DIRECTION
Open the catalog to page 7
TAILOR PIXELS TECHNOLOGY CO. LTD. Input Terminals Symbol NC H_GND Lane1_N Lane1_P H_GND Lane0_N Lane0_P H_GND AUX_CH_P AUX_CH_N H_GND LCD_VCC LCD_VCC NC LCD_GND LCD_GND HPD LED-1 LED-2 LED-3 LED-4 LED_PWMO LED_PWMI NC NC LED-5 LED-6 BL_PWR BL_PWR NC Function NC(NOT USE) High Speed Ground Complement Signal Link Lane 1 True Signal Link Lane 1 High Speed Ground Complement Signal Link Lane 0 True Signal Link Lane 0 High Speed Ground True Signal Auxiliary Channel mplement Signal Auxiliary Channel High Speed Ground CD logic and driver power(3.3V) CD logic and driver power(3.3V) NC(NOT USE) LCD...
Open the catalog to page 8
TAILOR PIXELS TECHNOLOGY CO. LTD. TP Interface Description 触摸屏接口定义描述 Pin No. Symbol Description I/O 描述 Reset Signal pin (“Low” is enable)(3.3V) Power supply(3.3V) System Ground An interrupt signal to inform the host processor that touch data is ready for read Serial Data Input And Output.(3.3V) Serial Clock Input.(3.3V) Note A: Calculator value for LED chip specification. Note B: The LED life time define as the estimated time to 50% degradation of initial lumi
Open the catalog to page 9
TAILOR PIXELS TECHNOLOGY CO. LTD.
Open the catalog to page 10
TAILOR PIXELS TECHNOLOGY CO. LTD. eDP 2lane 8bit input data mapping 5. Absolute Maximum Ratings Parameter +3.3V supply voltage Backlight supply voltage Input voltage(eDP) Storage temperature Operation temperature Symbol VDD VBL VI Tstg Topa [Note 5-1] eDP signals [Note 5-2] Humidity: 90%RH Max.at Ta≦+40 C. Maximum wet-bulb temperature at +39 C or less at Ta>+40 No condensation.
Open the catalog to page 11
TAILOR PIXELS TECHNOLOGY CO. LTD. 6-1. TFT-LCD panel driving Parameter +3.3V supply voltage Current dissipation Permissible input ripple voltage Parameter HPD High level output voltage HPD Low level output voltage Parameter Unit Interval for AUX channel Peak-to-peak voltage at TP1 AUX DC Common mode Voltage AUX Short current limit AUX CH termination Cresistor AUX AC coupling capacitor Number of pre-charge pulses Parameter Link clock down spreading Differential Peak-to-peak Input Voltage at Rx package pins Differential Return Loss at 1.35GHz at Rx package pins Differential termination...
Open the catalog to page 12
TAILOR PIXELS TECHNOLOGY CO. LTD. [Note 6-1-1] ON-OFF conditions for supply voltage t1 Automatic Black Video Video from source Black Video Valid Video Data t8 Display Backlight
Open the catalog to page 13
TAILOR PIXELS TECHNOLOGY CO. LTD. [Note 6-1-3]As for the power off sequence for VDD (t11), be sure to keep above mentioned timing. If the VDD power off sequence timing is other than shown above, LCD may cause permanent damage. *1 : As for the power sequence for backlight, it is recommended to apply above mentioned input timing. If the backlight is light on and off at a timing other than shown above, displaying image maybe getdisturbed. VDD-dip-conditions 1) 2.5 V≦VDD＜3.0 V td≦10 ms Under above condition, the display image should return to an appropriate figure after VDD voltage recovers. 2)...
Open the catalog to page 14
TAILOR PIXELS TECHNOLOGY CO. LTD. 7. Timing characteristics of input signals 7-1.Timing Characteristics Parameter Symbo Frequency Horizontal period Vertical period (High) Data enable signal Horizontal period (High) Vertical period [Note 7-1-1] In case of using the long vertical period, the deterioration of display quality, flicker, etc, may occur. 7-2. Input data signals and display position on the screen R1 G1 B1 R2 G2 B2 (1,1) (1,2) Display position of input data(V·H) 15
Open the catalog to page 15
TAILOR PIXELS TECHNOLOGY CO. LTD. 8. Input signal, basic display colors and gray scale of each color Each basic color can be displayed in 256 gray scales from 8 bit data signals. According to the combination of 24 bit data signals, the 16.7M color display can be achieved on the screen.
Open the catalog to page 16
TAILOR PIXELS TECHNOLOGY CO. LTD. 9. Optical Characteristics (Contrast、RT、viewing angle results are using CTO FOB+ SLW’s BLU) Items Contrast Ratio Luminance of white Response Time Red Chromaticity Green Blue White Viewing angle NTSC ratio Note 1: Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63 L0: Luminance of gray level 0 CR = CR (10) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note 5. Note 2: Definition of Response Time (T
Open the catalog to page 17All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures
-
TFT LCD serial for Smart Life11 Pages
