Catalogs >
TAILOR PIXELS TECHNOLOGY CO., LTD. >
Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600)

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600)
17Pages

Catalog excerpts

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 1

Manufacturer Certificated Product Specification Model: TTX101HHH-01 10.1″TFT Display Module (1024*600) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 3

TAILOR PIXELS TECHNOLOGY CO., LTD. Issued Date First Release.

Open the catalog to page 3

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. Feature Size Resolution Interface Connect type Color Depth Technology type Display Spec. Pixel pitch (mm) Pixel Configuration Display Mode Driver IC Surface Treatment Viewing Direction LCM (W x H x D) (mm) Active Area(mm) With /Without TSP Weight (g) LED Numbers Spec 10.1-inch 1024(horizontal)*600(Vertical) LVDS Connector 16.7M a-Si 0.1695*0.1695 R.G.B.-Vertical Stripe Normally Black HC ALL 235(W)×143(H)×2.8(D) 222.72(H)x125.28(V) Without TSP 24 Note 1: Viewing direction is follow the data which measured by optics equipment. Note 2: Requirements on...

Open the catalog to page 4

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 5

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 5

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 6

TAILOR PIXELS TECHNOLOGY CO., LTD. GND RXIN0RXIN0+ GND RXIN1RXIN1+ GND RXIN2RXIN2+ GND RXCLKINRXCLKIN+ GND RXIN3RXIN3+ GND NC NC GND NC DIMO SELB Description Common Voltage Power Voltage for digital circuit Power Voltage for digital circuit No connection Global reset pin Standby mode Normally pulled high STBYB=1, normal operation STBYB=0, timing controller, source Driver will turn off; all output is High-Z Ground -LVDS differential data input +LVDS differential data input Ground -LVDS differential data input +LVDS differential data input Ground -LVDS differential data input +LVDS...

Open the catalog to page 6

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 3 Vertical inversion Note 3 Gate off Voltage 35 VGL 36 NC 37 NC 38 VGH Gate ON Voltage 39 LED+ LED Anode 40 LED+ LED Anode Note 1: if LVDS input data is 6bit,selb must be set to high; if LVDS input data is 8bit,selb must be set to low; Note 2: When CABC_EN=00. CABC OFF. When CABC_EN=01, user interface image. When CABC_EN=10, still picture. When CABC_EN=11, moving image When CABC off, don’t connect DIMO, else connect it to backlight Note 3: when L/R=0 set right to left scan direction when L/R=1 set left to right scan direction when U/D=0 set top to...

Open the catalog to page 7

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. 6 Electrical Characteristics 6.1 TFT LCD Module

Open the catalog to page 8

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 9

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.2 Timing characteristics 6.2.1 Power Sequence

Open the catalog to page 9

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. Input Clock and Data Timing Diagram

Open the catalog to page 10

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 11

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 11

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 12

TAILOR PIXELS TECHNOLOGY CO., LTD. Data Input Format 6.3 Driving Backlight Item Forward Current Forward Voltage Remark Note 1 Note 2 Note 3 Note 1: Each LED: IF =20 mA, VF =3.0V. Note 2: Optical performance should be evaluated at Ta=25℃ only. Note 3: If LED is driven by high current, high ambient temperature & humidity condition. The lifetime of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating lifetime is estimated data.

Open the catalog to page 12

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 13

TAILOR PIXELS TECHNOLOGY CO., LTD. 7 Optical Characteristics Items Viewing angles Symbol Condition Min. θT θB Center CR≥10 θL θR Contrast Ratio Response Time Green Blue White Uniformity Luminance Θ=0 Normal viewing angle Test Conditions: 1. IF= 20mA (one channel), the ambient temperature is 25°C. 2. The test systems refer to Note 1 and Note 2. Note 1: Definition of optical measurement system. The optical characteristics should be measured in the darkroom. After 5 minutes of operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel...

Open the catalog to page 13

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 14

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 2: Definition of viewing angle range and measurement system. Viewing angle is measured at the center point of the LCD by CONOSCOPE (ergo-80). Note 3: Definition of contrast ratio Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%

Open the catalog to page 14

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 15

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the Center of each measuring area Luminance Uniformity (U) = Lmin/ Lmax X100% L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of...

Open the catalog to page 15

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 16

TAILOR PIXELS TECHNOLOGY CO., LTD. 8 Environmental / Reliability Tests No Test Item High Temperature Operation High Temperature Storage Low Temperature Storage High Temperature & Humidity Storage -30℃ 30 min ~ +80℃ 30 min Change time: 5min, 30 Cycle Thermal Shock (Non-operation) Electro Discharge (Operation) Vibration (Non-operation) Shock (Non-operation) Package Drop Test C=150pF, R=330 Ω, 5 points/panel Air:±8KV, 5 times; Contact: ±4KV, 5 times; (Environment: 15℃ ~ 35℃, 30% ~ 60%, 86Kpa ~ 106Kpa) Frequency range: 10~55Hz, Stroke: 1.mm Sweep: 10Hz~55Hz~10Hz 2 hours for each direction of...

Open the catalog to page 16

Product Specification Model:TTX101HHH-01 10.1″TFT Display Module (1024*600) - 17

TAILOR PIXELS TECHNOLOGY CO., LTD. 9 Precautions For Use of LCD modules 9.1 Handling Precautions 9.1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 9.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 9.1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 9.1.4 The...

Open the catalog to page 17