Website:
TAILOR PIXELS TECHNOLOGY CO., LTD.
Catalog excerpts
Manufacturer Certificated Product Specification Model: TTX101BHX-01 10.1″TFT Display Module (1280*800) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.
Open the catalog to page 1
PRODUCT GROUP ISSUE DATE SPEC . TITLE Initial Release
Open the catalog to page 2
PRODUCT GROUP ISSUE DATE SPEC. TITLE TTX101BHX-01 Product Specification General Description Absolute Maximum Ratings Electrical Specifications Optical Specifications Reliability Test Packing Information Product Label Handling & Cautions
Open the catalog to page 3
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE 1.0 GENERAL DESCRIPTION 1.1 Introduction HBM101WX10A is a color active matrix TFT LCD LCM using amorphous silicon TFT‘s (Thin Film Transistors) as an active switching devices. This module has a 10.1 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors. INPUT CONNECTOR 1.2 Features ⚫ LVDS Interface; ⚫ 6bit + Hi-FRC display 16.7M colors ⚫ High contrast ratio and Tran
Open the catalog to page 4
PRODUCT GROUP ISSUE DATE SPEC. TITLE 1.4 General Specification The followings are general specifications Parameter Active Area Pixel Pitch Pixel Arrangement Pixels RGB stripe arrangement Display Mode Normally Black Display Colors Surface Treatment Contrast Ratio Response Time Color Gamut Outline Dimension
Open the catalog to page 5
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE 2.0 ABSOLUTE MAXIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. < Table 2. Absolute Maximum Ratings> Parameter Power Supply Operating Temperature Storage Temperature Operating Ambient Humidity Storage Humidity Note: 1. These range above is maximum value not the actual operating temperature . Actual Operating temperature is no more than 40℃ and temperature refers to the LCM surface temperature ; Length of operation: No more than 8 hours per day, and no more than 4 hours of...
Open the catalog to page 6
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE 3.0 ELECTRICAL SPECIFICATIONS 3.1 TFT LCD Module < Table 3. LCD Module Electrical specifications > Values Parameter Power Supply Voltage Power Supply Current Note 1 Power Consumption Rush current CMOS Interface Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for VDD=3.3V, Frame rate f V=60Hz and Clock frequency = 72.4MHz. Test Pattern of power supply current a) Typ : Mosaic 8 x 6 Pattern(L0/L255) 2. The duration of rush current is about 2ms and...
Open the catalog to page 7
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE 3.2 INPUT TERMINAL PIN ASSIGNMENT This LCD employs one interface connections, a 40 pin connector is used for the LCD module electronics interface. 3.2.1 Pin assignment for LCD module Connector : MSAK24025P40G (STM) or equivalent < Table4. Pin Assignment for LCD Module Connector > Pin No. Symbol 1 LVDS Negative data signal (-) LVDS Positive data signal (+) LVDS Negative data signal (-) LVDS Positive data signal (+) LVDS Negative data signal (-) LVDS Positive data signal (+) LVDS Negative CLK signal (-) LVDS Positive CLK signal (+) LVDS...
Open the catalog to page 8
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE LVDS Positive data signal (+)
Open the catalog to page 9
PRODUCT GROUP ISSUE DATE SPEC. TITLE 3.3 Interface timing Parameter < Table5. LVDS Timing Parameter > DCLK Frequency Horizontal display area HSYNC blanking thbp+ thfp Vertical display area VSYNC period time VSYNC blanking Tvbp+ Tvfp HSYNC period time
Open the catalog to page 10
PRODUCT GROUP ISSUE DATE SPEC. TITLE TTX101BHX-01 Product Specification < Table6. Sequence Table > Values Parameter
Open the catalog to page 11
PRODUCT GROUP ISSUE DATE SPEC. NUMBER SPEC. TITLE 4.0 OPTICAL SPECIFICATIONS 4.1 Overview The test of optical specifications shall be measured in a dark room (ambient luminance equipment of Luminance meter system (Gonio meter system and TOPCON BM-5) and test unit shall be located at an approximate dista nce 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0 . We refer to θØ =0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ=90 (= θ12 ) as the 12 O’clock direction (“upward”), θØ=180 (= θ9 ) as the 9 O’clock direction (“left”) and θØ=27 0(= θ6 ) as the 6 O’clock direction...
Open the catalog to page 12
PRODUCT GROUP ISSUE DATE SPEC. TITLE TTX101BHX-01 Product Specification Note 1:The definition of Viewing Angle Refer to the graph below marked by θ and Ф. Note2:ThedefinitionofContrastRatio Luminance When LCD is at “White” state Contrast Ratio(CR)= Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common electrode voltage) Note3:DefinitionofResponse time.(Test LCD using RD80S or similar equipments): The output sign also photo detector are measured when the input sign also are changed from “black ” to “white”(Voltage falling time)and from “white” to “black”...
Open the catalog to page 13
PRODUCT GROUP ISSUE DATE SPEC. TITLE TTX101BHX-01 Product Specification Note 5: Definition of Color of CIE Coordinate and NTSC Ratio. Note 6: gamma curve control ⚫For gamma curve control, HUAWEI’s request as below: ⚫1,the whole curve’s tolerance must control within +/-0.3, HUAWEI will test the gray scale below: 0, 8, 16, 25, 33, 41, 49, 58, 66, 74, 82, 90, 99, 107, 115, 123, 132, 140, 148, 156, 165, 173, 181, 189, 19 7,206, 214, 222, 230, 239, 247, 255 Note 7: Polarization Direction Definition ⚫Viewing direction is normal user viewing direction which is vertical to the display surface ⚫The...
Open the catalog to page 14
PRODUCT GROUP TFT- LCM PRODUCT SPEC. NUMBER ISSUE DATE 2020-10-18 PAGE SPEC. TITLE 5.0 RELIABLITY TEST The Reliability test items and its conditions are shown in below. No Test Items High temperature storage test Low temperature storage test Low temperature operation test High temperature operation test High temperature & high humidity (operation test) Thermal Shock Test
Open the catalog to page 15All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures
-
TFT LCD serial for Smart Life11 Pages
