Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600)
15Pages

{{requestButtons}}

Catalog excerpts

Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 1

Manufacturer Certificated Product Specification Model: TTX101BHT-01 10.1″TFT Display Module (1024*600) This module uses RoHS material Tailor Pixels Technology Co., Ltd. www.tailorpixels.com tailor@tailorpixels.com Ph: 86-755-8821 2653 Contents in this document are subject to change without notice. No part of this document can be reproduced or transmitted by any means for any purpose without the written permission of Tailor Pixels Technology Co., Ltd.

Open the catalog to page 1
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 3

TAILOR PIXELS TECHNOLOGY CO., LTD. Issued Date First Release.

Open the catalog to page 3
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 4

TAILOR PIXELS TECHNOLOGY CO., LTD. Feature Size Resolution Interface Connect type Color Depth Technology type Pixel pitch (mm) Pixel Configuration Display Mode Driver IC Surface Treatment Viewing Direction Gray scale Direction LCM (W x H x D) (mm) Active Area(mm) With /Without TSP Weight (g) LED Numbers Spec 10.1-inch 1024(horizontal)*600(Vertical) RGB Connector 262K a-Si 0.2175*0.2088 R.G.B.-Stripe Normally White Transmissive TBD HC 12 O'CLOCK 6 O'CLOCK 235*143*4.9 222.72 x 125.28 Without TSP TBD 39 LEDs Note 1: Viewing direction follows the data measured by optics equipment. Note 2:...

Open the catalog to page 4
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 5

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 5
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 6

TAILOR PIXELS TECHNOLOGY CO., LTD. NO connection NO connection Power Ground Common voltage Power for Digital Circuit DE/SYNC mode select Note1 Data Enable Vertical sync signal Horizontal sync Signal Blue data (MSB) Blue data Blue data Blue data Blue data Blue data Blue data Note2 Blue data (LSB) Note2 Green data (MSB) Green data Green data Green data Green data Green data Green data Note2 Green data (LSB) Note2 Red Data (MSB) Note2 Red Data

Open the catalog to page 6
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 7

TAILOR PIXELS TECHNOLOGY CO., LTD. Red Data Red Data Red Data Note2 Red Data (LSB) Note2 Power Ground Pixel clock Note3 Power Ground Left/right selection Note4/5 up/down selection Note4/5 Gate ON Voltage Gate OFF Voltage Power for Analog Circuit Global reset pin Note6 NO connection Common Voltage Dithering function Note7 Power Ground NO connection NO connection 5 Absolute Maximum Ratings Item Digital Supply Voltage Analog power Supply Voltage Operating Temperature Storage Temperature

Open the catalog to page 7
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 8

TAILOR PIXELS TECHNOLOGY CO., LTD. 6 Electrical Characteristics 6.1 Operation Conditions Item Digital Supply Voltage Analog Power Supply Voltage TFT Common electrode Voltage IVGH IVGL Current Consumption of VDD Current Consumption of AVDD Current Consumption of VGH Current Consumption of VGL

Open the catalog to page 8
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 9

TAILOR PIXELS TECHNOLOGY CO., LTD.

Open the catalog to page 9
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 10

TAILOR PIXELS TECHNOLOGY CO., LTD. 6.3 Driving Backlight Item Forward Current Forward Voltage Note 1: Each LED: IF =60 mA, VF =3.0V. Note 2: Optical performance should be evaluated at Ta=25℃ only. Note 3: If LED is driven by high current, high ambient temperature & humidity condition. The lifetime time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating lifetime is estimated data.

Open the catalog to page 10
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 11

TAILOR PIXELS TECHNOLOGY CO., LTD. 7 Optical Characteristics Items Viewing angles Contrast Ratio Response Time White Symbol Condition Min. θT 50 θB 65 Center CR≥10 θL 65 θR 65 CR Test Conditions: 1. IF= 20mA (one channel), the ambient temperature is 25°C. 2. The test systems refer to Note 1 and Note 2. Note 1: Definition of optical measurement system. The optical characteristics should be measured in the darkroom. After 5 minutes of operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center...

Open the catalog to page 11
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 12

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 2: Definition of viewing angle range and measurement system. Viewing angle is measured at the center point of the LCD by CONOSCOPE (ergo-80). Note 3: Definition of contrast ratio Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%

Open the catalog to page 12
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 13

TAILOR PIXELS TECHNOLOGY CO., LTD. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the Center of each measuring area Luminance Uniformity (U) = Lmin/ Lmax X100% L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of...

Open the catalog to page 13
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 14

TAILOR PIXELS TECHNOLOGY CO., LTD. 8 Environmental / Reliability Tests No Test Item High Temperature Operation High Temperature Storage Low Temperature Storage High Temperature & Humidity Storage -30℃ 30 min ~ +80℃ 30 min Change time: 5min, 30 Cycle Thermal Shock (Non-operation) Electro Discharge (Operation) Vibration (Non-operation) Shock (Non-operation) Package Drop Test C=150pF, R=330 Ω, 5 points/panel Air:±8KV, 5 times; Contact: ±4KV, 5 times; (Environment: 15℃ ~ 35℃, 30% ~ 60%, 86Kpa ~ 106Kpa) Frequency range: 10~55Hz, Stroke: 1.mm Sweep: 10Hz~55Hz~10Hz 2 hours for each direction of...

Open the catalog to page 14
Product Specification Model:TTX101BHT-01 10.1″TFT Display Module (1024*600) - 15

TAILOR PIXELS TECHNOLOGY CO., LTD. 9 Precautions For Use of LCD modules 9.1 Handling Precautions 9.1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 9.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 9.1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 9.1.4 The...

Open the catalog to page 15

All TAILOR PIXELS TECHNOLOGY CO. catalogs and technical brochures